realtek: remove support for HPE 1920 series

[openwrt/openwrt.git] / target / linux / realtek / base-files / etc / board.d / 02_network

diff --git a/target/linux/realtek/base-files/etc/board.d/02_network b/target/linux/realtek/base-files/etc/board.d/02_network
index 5356bcac65d078bac2a140dd3d35f502b90f2ef2..af9db848dd8ad91da0ba83589dadb7be5dcae3b4 100644 (file)
--- a/target/linux/realtek/base-files/etc/board.d/02_network
+++ b/target/linux/realtek/base-files/etc/board.d/02_network
@@ -22,20 +22,9 @@ ucidef_set_bridge_device switch
 ucidef_set_interface_lan "$lan_list"
 
 lan_mac=""
-lan_mac_start=""
 lan_mac_end=""
 label_mac=""
 case $board in
-hpe,1920-8g|\
-hpe,1920-16g|\
-hpe,1920-24g)
-       label_mac=$(mtd_get_mac_binary factory 0x68)
-       lan_mac=$label_mac
-       mac_count1=$(hexdump -v -n 4 -s 0x110 -e '4 "%d"' $(find_mtd_part factory) 2>/dev/null)
-       mac_count2=$(hexdump -v -n 4 -s 0x114 -e '4 "%d"' $(find_mtd_part factory) 2>/dev/null)
-       lan_mac_start=$(macaddr_add $lan_mac 2)
-       lan_mac_end=$(macaddr_add $lan_mac $((mac_count2-mac_count1)))
-       ;;
 *)
        lan_mac=$(mtd_get_mac_ascii u-boot-env2 mac_start)
        lan_mac_end=$(mtd_get_mac_ascii u-boot-env2 mac_end)
@@ -47,11 +36,10 @@ esac
 ucidef_set_interface_macaddr "lan" $lan_mac
 ucidef_set_bridge_mac "$lan_mac"
 ucidef_set_network_device_mac eth0 $lan_mac
-[ -z "$lan_mac_start" ] && lan_mac_start=$lan_mac
 for lan in $lan_list; do
-       ucidef_set_network_device_mac $lan $lan_mac_start
-       [ -z "$lan_mac_end" ] || [ "$lan_mac_start" == "$lan_mac_end" ] && lan_mac_start=$(macaddr_setbit_la $lan_mac_start)
-       lan_mac_start=$(macaddr_add $lan_mac_start 1)
+       ucidef_set_network_device_mac $lan $lan_mac
+       [ -z "$lan_mac_end" ] || [ "$lan_mac" == "$lan_mac_end" ] && lan_mac=$(macaddr_setbit_la $lan_mac)
+       lan_mac=$(macaddr_add $lan_mac 1)
 done
 [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac