realtek: Setup all VLANs with default configurations

[openwrt/openwrt.git] / target / linux / realtek / files-5.4 / drivers / net / dsa / rtl83xx / rtl838x.c

diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
index b31b1ae6baf71e67aebe95d7a86cb8c41c4f182d..9ecd189d91d07ab81ac029d3a32d2797e756ddc5 100644 (file)
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
@@ -92,6 +92,16 @@ static void rtl838x_vlan_set_untagged(u32 vlan, u64 portmask)
        rtl_table_release(r);
 }
 
+/* Sets the L2 forwarding to be based on either the inner VLAN tag or the outer
+ */
+static void rtl838x_vlan_fwd_on_inner(int port, bool is_set)
+{
+       if (is_set)
+               sw_w32_mask(BIT(port), 0, RTL838X_VLAN_PORT_FWD);
+       else
+               sw_w32_mask(0, BIT(port), RTL838X_VLAN_PORT_FWD);
+}
+
 static inline int rtl838x_mac_force_mode_ctrl(int p)
 {
        return RTL838X_MAC_FORCE_MODE_CTRL + (p << 2);
@@ -406,6 +416,7 @@ const struct rtl838x_reg rtl838x_reg = {
        .mac_force_mode_ctrl = rtl838x_mac_force_mode_ctrl,
        .vlan_profile_dump = rtl838x_vlan_profile_dump,
        .vlan_profile_setup = rtl838x_vlan_profile_setup,
+       .vlan_fwd_on_inner = rtl838x_vlan_fwd_on_inner,
        .stp_get = rtl838x_stp_get,
        .stp_set = rtl838x_stp_set,
        .mac_port_ctrl = rtl838x_mac_port_ctrl,