sunxi: move bananapi dts into patches [3.14]

[openwrt/openwrt.git] / target / linux / sunxi / files / arch / arm / boot / dts / sun7i-a20-bananapi.dts

diff --git a/target/linux/sunxi/files/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/target/linux/sunxi/files/arch/arm/boot/dts/sun7i-a20-bananapi.dts
deleted file mode 100644 (file)
index 969bfa4..0000000
--- a/target/linux/sunxi/files/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright 2014 Zoltan HERPAI
- * Zoltan HERPAI <wigyori@uid0.hu>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "sun7i-a20.dtsi"
-/include/ "sunxi-ahci-reg.dtsi"
-/include/ "sun4i-a10-usb-vbus-reg.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Lemaker bananaPi";
-       compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
-
-       aliases {
-               spi0 = &spi1;
-               spi1 = &spi2;
-       };
-
-       soc@01c00000 {
-               spi1: spi@01c06000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&spi1_pins_a>;
-                       status = "okay";
-               };
-
-               spi2: spi@01c17000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&spi2_pins_a>;
-                       status = "okay";
-               };
-
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default", "default";
-                       pinctrl-0 = <&mmc0_pins_a>;
-                       pinctrl-1 = <&mmc0_cd_pin_bananapi>;
-                       cd-gpios = <&pio 7 10 0>; /* PH10 */
-                       status = "okay";
-               };
-
-               usbphy: phy@01c13400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       usb2_vbus-supply = <&reg_usb2_vbus>;
-                       status = "okay";
-               };
-
-               ehci0: usb@01c14000 {
-                       status = "okay";
-               };
-
-               ohci0: usb@01c14400 {
-                       status = "okay";
-               };
-
-               ahci: sata@01c18000 {
-                       target-supply = <&reg_ahci_5v>;
-                       status = "okay";
-               };
-
-               ehci1: usb@01c1c000 {
-                       status = "okay";
-               };
-
-               ohci1: usb@01c1c400 {
-                       status = "okay";
-               };
-
-               pinctrl@01c20800 {
-                       led_pins_bananapi: led_pins@0 {
-                               allwinner,pins = "PH2";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <1>;
-                               allwinner,pull = <0>;
-                       };
-
-                       mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-                               allwinner,pins = "PH10";
-                               allwinner,function = "gpio_in";
-                               allwinner,drive = <0>;
-                               allwinner,pull = <1>;
-                       };
-               };
-
-               lradc: lradc@01c22800 {
-                       allwinner,chan0-step = <200>;
-                       linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
-                                               KEY_MENU KEY_SEARCH KEY_HOME
-                                               KEY_ESC KEY_ENTER>;
-                       status = "okay";
-               };
-
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
-
-               uart6: serial@01c29800 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart6_pins_a>;
-                       status = "okay";
-               };
-
-               uart7: serial@01c29c00 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart7_pins_a>;
-                       status = "okay";
-               };
-
-               i2c0: i2c@01c2ac00 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins_a>;
-                       status = "okay";
-               };
-
-               i2c1: i2c@01c2b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c1_pins_a>;
-                       status = "okay";
-               };
-
-               i2c2: i2c@01c2b400 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c2_pins_a>;
-                       status = "okay";
-               };
-
-               gmac: ethernet@01c50000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&gmac_pins_mii_a>;
-                       phy = <&phy1>;
-                       phy-mode = "mii";
-                       status = "okay";
-
-                       phy1: ethernet-phy@1 {
-                               reg = <1>;
-                       };
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_bananapi>;
-
-               green {
-                       label = "bananapi:green:usr";
-                       gpios = <&pio 7 2 0>;
-                       default-state = "on";
-               };
-       };
-};