sunxi: drop 3.14 support

[openwrt/openwrt.git] / target / linux / sunxi / patches-3.14 / 141-dt-sunxi-add-common-regulator-include.patch

diff --git a/target/linux/sunxi/patches-3.14/141-dt-sunxi-add-common-regulator-include.patch b/target/linux/sunxi/patches-3.14/141-dt-sunxi-add-common-regulator-include.patch
deleted file mode 100644 (file)
index 32f4f72..0000000
--- a/target/linux/sunxi/patches-3.14/141-dt-sunxi-add-common-regulator-include.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 6e763a8ebe7a16ae5635ade146fd2930749ed775 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 1 Mar 2014 14:57:56 +0100
-Subject: [PATCH] ARM: sunxi: dt: Add sunxi-common-regulators include file
-
-Most sunxi boards with a sata connector also have a gpio controlled connector
-for sata target power and almost all sunxi boards have a gpio controlled vbus
-for usb1 and usb2.
-
-This commit adds an include file for the regulators representing these
-supplies, avoiding the need to copy and paste the regulator code to allmost
-all sunxi board dts files.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sunxi-common-regulators.dtsi | 75 ++++++++++++++++++++++++++
- 1 file changed, 75 insertions(+)
- create mode 100644 arch/arm/boot/dts/sunxi-common-regulators.dtsi
-
---- /dev/null
-+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
-@@ -0,0 +1,75 @@
-+/*
-+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
-+ *
-+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+      soc@01c00000 {
-+              pio: pinctrl@01c20800 {
-+                      ahci_pwr_pin_a: ahci_pwr_pin@0 {
-+                              allwinner,pins = "PB8";
-+                              allwinner,function = "gpio_out";
-+                              allwinner,drive = <0>;
-+                              allwinner,pull = <0>;
-+                      };
-+
-+                      usb1_vbus_pin_a: usb1_vbus_pin@0 {
-+                              allwinner,pins = "PH6";
-+                              allwinner,function = "gpio_out";
-+                              allwinner,drive = <0>;
-+                              allwinner,pull = <0>;
-+                      };
-+
-+                      usb2_vbus_pin_a: usb2_vbus_pin@0 {
-+                              allwinner,pins = "PH3";
-+                              allwinner,function = "gpio_out";
-+                              allwinner,drive = <0>;
-+                              allwinner,pull = <0>;
-+                      };
-+              };
-+      };
-+
-+      reg_ahci_5v: ahci-5v {
-+              compatible = "regulator-fixed";
-+              pinctrl-names = "default";
-+              pinctrl-0 = <&ahci_pwr_pin_a>;
-+              regulator-name = "ahci-5v";
-+              regulator-min-microvolt = <5000000>;
-+              regulator-max-microvolt = <5000000>;
-+              enable-active-high;
-+              gpio = <&pio 1 8 0>;
-+              status = "disabled";
-+      };
-+
-+      reg_usb1_vbus: usb1-vbus {
-+              compatible = "regulator-fixed";
-+              pinctrl-names = "default";
-+              pinctrl-0 = <&usb1_vbus_pin_a>;
-+              regulator-name = "usb1-vbus";
-+              regulator-min-microvolt = <5000000>;
-+              regulator-max-microvolt = <5000000>;
-+              enable-active-high;
-+              gpio = <&pio 7 6 0>;
-+              status = "disabled";
-+      };
-+
-+      reg_usb2_vbus: usb2-vbus {
-+              compatible = "regulator-fixed";
-+              pinctrl-names = "default";
-+              pinctrl-0 = <&usb2_vbus_pin_a>;
-+              regulator-name = "usb2-vbus";
-+              regulator-min-microvolt = <5000000>;
-+              regulator-max-microvolt = <5000000>;
-+              enable-active-high;
-+              gpio = <&pio 7 3 0>;
-+              status = "disabled";
-+      };
-+};