sunxi: drop 3.14 support

[openwrt/openwrt.git] / target / linux / sunxi / patches-3.14 / 163-dt-sun4i-add-usb-host-to-boards.patch

diff --git a/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch b/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch
deleted file mode 100644 (file)
index ce78cb7..0000000
--- a/target/linux/sunxi/patches-3.14/163-dt-sun4i-add-usb-host-to-boards.patch
+++ /dev/null
@@ -1,240 +0,0 @@
-From f2509ec45a09013e300460a967f694561d169b98 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 11 Jan 2014 04:47:38 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to hackberry dts
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Based on fex file settings, the fex file also contains a mysterious line:
-usb_hub_vcc_en_gpio = port:PB09<1><0><default><0>
-
-Which also clashes with usbc0, which has:
-usb_drv_vbus_gpio = port:PB09<1><0><default><0>
-
-So if usb does not work properly we need someone with a hackberry to look
-closer into this.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 40 +++++++++++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
-
---- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-@@ -13,6 +13,7 @@
- 
- /dts-v1/;
- /include/ "sun4i-a10.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
- 
- / {
-       model = "Miniand Hackberry";
-@@ -35,6 +36,28 @@
-                       };
-               };
- 
-+              usbphy: phy@01c13400 {
-+                      usb1_vbus-supply = <&reg_usb1_vbus>;
-+                      usb2_vbus-supply = <&reg_usb2_vbus>;
-+                      status = "okay";
-+              };
-+
-+              ehci0: usb@01c14000 {
-+                      status = "okay";
-+              };
-+
-+              ohci0: usb@01c14400 {
-+                      status = "okay";
-+              };
-+
-+              ehci1: usb@01c1c000 {
-+                      status = "okay";
-+              };
-+
-+              ohci1: usb@01c1c400 {
-+                      status = "okay";
-+              };
-+
-               pio: pinctrl@01c20800 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&hackberry_hogs>;
-@@ -45,6 +68,13 @@
-                               allwinner,drive = <0>;
-                               allwinner,pull = <0>;
-                       };
-+
-+                      usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
-+                                      allwinner,pins = "PH12";
-+                                      allwinner,function = "gpio_out";
-+                                      allwinner,drive = <0>;
-+                                      allwinner,pull = <0>;
-+                      };
-               };
- 
-               uart0: serial@01c28000 {
-@@ -66,4 +96,14 @@
-                       gpio = <&pio 7 19 0>;
-               };
-       };
-+
-+      reg_usb1_vbus: usb1-vbus {
-+              status = "okay";
-+      };
-+
-+      reg_usb2_vbus: usb2-vbus {
-+              pinctrl-0 = <&usb2_vbus_pin_hackberry>;
-+              gpio = <&pio 7 12 0>;
-+              status = "okay";
-+      };
- };
---- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-@@ -13,16 +13,47 @@
- 
- /dts-v1/;
- /include/ "sun4i-a10.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
- 
- / {
-       model = "PineRiver Mini X-Plus";
-       compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
- 
-       soc@01c00000 {
-+              usbphy: phy@01c13400 {
-+                      usb1_vbus-supply = <&reg_usb1_vbus>;
-+                      usb2_vbus-supply = <&reg_usb2_vbus>;
-+                      status = "okay";
-+              };
-+
-+              ehci0: usb@01c14000 {
-+                      status = "okay";
-+              };
-+
-+              ohci0: usb@01c14400 {
-+                      status = "okay";
-+              };
-+
-+              ehci1: usb@01c1c000 {
-+                      status = "okay";
-+              };
-+
-+              ohci1: usb@01c1c400 {
-+                      status = "okay";
-+              };
-+
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
-       };
-+
-+      reg_usb1_vbus: usb1-vbus {
-+              status = "okay";
-+      };
-+
-+      reg_usb2_vbus: usb2-vbus {
-+              status = "okay";
-+      };
- };
---- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-@@ -12,6 +12,7 @@
- 
- /dts-v1/;
- /include/ "sun4i-a10.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
- 
- / {
-       model = "LinkSprite pcDuino";
-@@ -33,6 +34,28 @@
-                       };
-               };
- 
-+              usbphy: phy@01c13400 {
-+                      usb1_vbus-supply = <&reg_usb1_vbus>;
-+                      usb2_vbus-supply = <&reg_usb2_vbus>;
-+                      status = "okay";
-+              };
-+
-+              ehci0: usb@01c14000 {
-+                      status = "okay";
-+              };
-+
-+              ohci0: usb@01c14400 {
-+                      status = "okay";
-+              };
-+
-+              ehci1: usb@01c1c000 {
-+                      status = "okay";
-+              };
-+
-+              ohci1: usb@01c1c400 {
-+                      status = "okay";
-+              };
-+
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-@@ -45,4 +68,12 @@
-                       status = "okay";
-               };
-       };
-+
-+      reg_usb1_vbus: usb1-vbus {
-+              status = "okay";
-+      };
-+
-+      reg_usb2_vbus: usb2-vbus {
-+              status = "okay";
-+      };
- };
---- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-@@ -34,11 +34,33 @@
-                       };
-               };
- 
-+              usbphy: phy@01c13400 {
-+                      usb1_vbus-supply = <&reg_usb1_vbus>;
-+                      usb2_vbus-supply = <&reg_usb2_vbus>;
-+                      status = "okay";
-+              };
-+
-+              ehci0: usb@01c14000 {
-+                      status = "okay";
-+              };
-+
-+              ohci0: usb@01c14400 {
-+                      status = "okay";
-+              };
-+
-               ahci: sata@01c18000 {
-                       target-supply = <&reg_ahci_5v>;
-                       status = "okay";
-               };
- 
-+              ehci1: usb@01c1c000 {
-+                      status = "okay";
-+              };
-+
-+              ohci1: usb@01c1c400 {
-+                      status = "okay";
-+              };
-+
-               pinctrl@01c20800 {
-                       led_pins_cubieboard: led_pins@0 {
-                               allwinner,pins = "PH20", "PH21";
-@@ -87,4 +109,12 @@
-       reg_ahci_5v: ahci-5v {
-               status = "okay";
-       };
-+
-+      reg_usb1_vbus: usb1-vbus {
-+              status = "okay";
-+      };
-+
-+      reg_usb2_vbus: usb2-vbus {
-+              status = "okay";
-+      };
- };