sunxi: drop 3.14 support

[openwrt/openwrt.git] / target / linux / sunxi / patches-3.14 / 232-1-dt-sun7i-add-wifi-to-cubietruck.patch

diff --git a/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch b/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch
deleted file mode 100644 (file)
index 4b19579..0000000
--- a/target/linux/sunxi/patches-3.14/232-1-dt-sun7i-add-wifi-to-cubietruck.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 3e7fc7d394db0783996519f2d5affde5152a628e Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Thu, 26 Dec 2013 17:14:33 +0800
-Subject: [PATCH] ARM: dts: sun7i: add WiFi module to Cubietruck DTS
-
-The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
-part is a BCM43362 IC connected to MMC2 in the A20 SoC via SDIO.
-The IC also takes a 32.768 KHz low power clock input, and a power
-enable signal via GPIO.
-
-The WiFi module supports out-of-band interrupt signaling via GPIO,
-but this is not supported in this patch.
----
- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 47 ++++++++++++++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
---- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -28,6 +28,23 @@
-                       status = "okay";
-               };
- 
-+              mmc3: mmc@01c12000 {
-+                      pinctrl-names = "default", "default";
-+                      pinctrl-0 = <&mmc3_pins_a>;
-+                      pinctrl-1 = <&wifi_host_wake_pin>;
-+                      vmmc-supply = <&reg_vmmc3>;
-+                      non-removable;
-+                      status = "okay";
-+
-+                      brcmf: bcrmf@0 {
-+                              /* out of band interrupt not working */
-+                              /* compatible = "broadcom,bcm43362"; */
-+                              interrupt-parent = <&pio>;
-+                              interrupts = <10 2>; /* EINT10 */
-+                              status = "okay";
-+                      };
-+              };
-+
-               usbphy: phy@01c13400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       usb2_vbus-supply = <&reg_usb2_vbus>;
-@@ -56,6 +73,18 @@
-               };
- 
-               pinctrl@01c20800 {
-+                      mmc3_pins_a: mmc3@0 {
-+                              /* AP6210 requires pull-up */
-+                              allwinner,pull = <1>;
-+                      };
-+
-+                      vmmc3_pin_cubietruck: vmmc3_pin@0 {
-+                              allwinner,pins = "PH9";
-+                              allwinner,function = "gpio_out";
-+                              allwinner,drive = <0>;
-+                              allwinner,pull = <0>;
-+                      };
-+
-                       ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-                               allwinner,pins = "PH12";
-                               allwinner,function = "gpio_out";
-@@ -99,6 +128,13 @@
- 
-                               /include/ "x-powers-axp209.dtsi"
-                       };
-+
-+                      wifi_host_wake_pin: wifi_host_wake_pin@0 {
-+                              allwinner,pins = "PH10";
-+                              allwinner,function = "gpio_in";
-+                              allwinner,drive = <0>;
-+                              allwinner,pull = <0>;
-+                      };
-               };
- 
-               i2c0: i2c@01c2ac00 {
-@@ -189,4 +225,15 @@
-       reg_usb2_vbus: usb2-vbus {
-               status = "okay";
-       };
-+
-+      reg_vmmc3: vmmc3 {
-+              compatible = "regulator-fixed";
-+              pinctrl-names = "default";
-+              pinctrl-0 = <&vmmc3_pin_cubietruck>;
-+              regulator-name = "vmmc3";
-+              regulator-min-microvolt = <3300000>;
-+              regulator-max-microvolt = <3300000>;
-+              enable-active-high;
-+              gpio = <&pio 7 9 0>;
-+      };
- };