kernel: delete Linux 5.4 config and patches

[openwrt/openwrt.git] / target / linux / sunxi / patches-5.4 / 441-arm64-dts-add-PWM-node.patch

diff --git a/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch b/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
deleted file mode 100644 (file)
index c14e729..0000000
--- a/target/linux/sunxi/patches-5.4/441-arm64-dts-add-PWM-node.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Jernej Skrabec <jernej.skrabec@siol.net>
-
-Allwinner H6 PWM is similar to that in A20 except that it has additional
-bus clock and reset line.
-
-Note that first PWM channel is connected to output pin and second
-channel is used internally, as a clock source to AC200 co-packaged chip.
-This means that any combination of these two channels can be used and
-thus it doesn't make sense to add pinctrl nodes at this point.
-
-Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
-Signed-off-by: Clément Péron <peron.clem@gmail.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-@@ -231,6 +231,16 @@
-                       status = "disabled";
-               };
- 
-+              pwm: pwm@300a000 {
-+                      compatible = "allwinner,sun50i-h6-pwm";
-+                      reg = <0x0300a000 0x400>;
-+                      clocks = <&osc24M>, <&ccu CLK_BUS_PWM>;
-+                      clock-names = "mod", "bus";
-+                      resets = <&ccu RST_BUS_PWM>;
-+                      #pwm-cells = <3>;
-+                      status = "disabled";
-+              };
-+
-               pio: pinctrl@300b000 {
-                       compatible = "allwinner,sun50i-h6-pinctrl";
-                       reg = <0x0300b000 0x400>;