musl: add powerpc soft-float support

[openwrt/openwrt.git] / toolchain / musl / patches / 010-Add-PowerPC-soft-float-support.patch

diff --git a/toolchain/musl/patches/010-Add-PowerPC-soft-float-support.patch b/toolchain/musl/patches/010-Add-PowerPC-soft-float-support.patch
new file mode 100644 (file)
index 0000000..7dfb7ed
--- /dev/null
+++ b/toolchain/musl/patches/010-Add-PowerPC-soft-float-support.patch
@@ -0,0 +1,141 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Wed, 8 Jul 2015 13:56:37 +0200
+Subject: [PATCH] Add PowerPC soft-float support
+
+Some PowerPC CPUs (e.g. Freescale MPC85xx) have a completely different
+instruction set for floating point operations (SPE).
+Executing regular PowerPC floating point instructions results in
+"Illegal instruction" errors.
+
+Until support for SPE FPU is added, make it possible to run these
+devices in soft-float mode.
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+ create mode 100644 src/fenv/powerpc-sf/fenv.sub
+ create mode 100644 src/setjmp/powerpc-sf/longjmp.s
+ create mode 100644 src/setjmp/powerpc-sf/longjmp.sub
+ create mode 100644 src/setjmp/powerpc-sf/setjmp.s
+ create mode 100644 src/setjmp/powerpc-sf/setjmp.sub
+
+--- a/configure
++++ b/configure
+@@ -498,6 +498,10 @@ trycppif "_MIPSEL || __MIPSEL || __MIPSE
+ trycppif __mips_soft_float "$t" && SUBARCH=${SUBARCH}-sf
+ fi
+ 
++if test "$ARCH" = "powerpc" ; then
++trycppif _SOFT_FLOAT "$t" && SUBARCH=${SUBARCH}-sf
++fi
++
+ test "$ARCH" = "microblaze" && trycppif __MICROBLAZEEL__ "$t" \
+ && SUBARCH=${SUBARCH}el
+ 
+--- /dev/null
++++ b/src/fenv/powerpc-sf/fenv.sub
+@@ -0,0 +1 @@
++../fenv.c
+--- /dev/null
++++ b/src/setjmp/powerpc-sf/longjmp.s
+@@ -0,0 +1,47 @@
++      .global _longjmp
++      .global longjmp
++      .type   _longjmp,@function
++      .type   longjmp,@function
++_longjmp:
++longjmp:
++# void longjmp(jmp_buf env, int val);
++# put val into return register and restore the env saved in setjmp
++# if val(r4) is 0, put 1 there.
++      # 0) move old return address into r0
++      lwz 0, 0(3)
++      # 1) put it into link reg
++      mtlr 0
++      #2 ) restore stack ptr
++      lwz 1, 4(3)
++      #3) restore control reg
++      lwz 0, 8(3)
++      mtcr 0
++      #4) restore r14-r31
++      lwz 14, 12(3)
++      lwz 15, 16(3)
++      lwz 16, 20(3)
++      lwz 17, 24(3)
++      lwz 18, 28(3)
++      lwz 19, 32(3)
++      lwz 20, 36(3)
++      lwz 21, 40(3)
++      lwz 22, 44(3)
++      lwz 23, 48(3)
++      lwz 24, 52(3)
++      lwz 25, 56(3)
++      lwz 26, 60(3)
++      lwz 27, 64(3)
++      lwz 28, 68(3)
++      lwz 29, 72(3)
++      lwz 30, 76(3)
++      lwz 31, 80(3)
++      #5) put val into return reg r3
++      mr 3, 4
++
++      #6) check if return value is 0, make it 1 in that case
++      cmpwi cr7, 4, 0
++      bne cr7, 1f
++      li 3, 1
++1:
++      blr
++
+--- /dev/null
++++ b/src/setjmp/powerpc-sf/longjmp.sub
+@@ -0,0 +1 @@
++longjmp.s
+--- /dev/null
++++ b/src/setjmp/powerpc-sf/setjmp.s
+@@ -0,0 +1,43 @@
++      .global ___setjmp
++      .hidden ___setjmp
++      .global __setjmp
++      .global _setjmp
++      .global setjmp
++      .type   __setjmp,@function
++      .type   _setjmp,@function
++      .type   setjmp,@function
++___setjmp:
++__setjmp:
++_setjmp:
++setjmp:
++      # 0) store IP int 0, then into the jmpbuf pointed to by r3 (first arg)
++      mflr 0
++      stw 0, 0(3)
++      # 1) store reg1 (SP)
++      stw 1, 4(3)
++      # 2) store cr
++      mfcr 0
++      stw 0, 8(3)
++      # 3) store r14-31
++      stw 14, 12(3)
++      stw 15, 16(3)
++      stw 16, 20(3)
++      stw 17, 24(3)
++      stw 18, 28(3)
++      stw 19, 32(3)
++      stw 20, 36(3)
++      stw 21, 40(3)
++      stw 22, 44(3)
++      stw 23, 48(3)
++      stw 24, 52(3)
++      stw 25, 56(3)
++      stw 26, 60(3)
++      stw 27, 64(3)
++      stw 28, 68(3)
++      stw 29, 72(3)
++      stw 30, 76(3)
++      stw 31, 80(3)
++      # 4) set return value to 0
++      li 3, 0
++      # 5) return
++      blr
+--- /dev/null
++++ b/src/setjmp/powerpc-sf/setjmp.sub
+@@ -0,0 +1 @@
++setjmp.s