X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fat91%2Fpatches-5.15%2F196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch;fp=target%2Flinux%2Fat91%2Fpatches-5.15%2F196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch;h=c99a2d5219bb48dc740e4e5e106396a3ae39cc39;hp=0000000000000000000000000000000000000000;hb=eb758a8fec2cee24e528008052fa2bd58482ca3a;hpb=c5c37886cff1705ba9be9b33df3ab121bd27fe6b diff --git a/target/linux/at91/patches-5.15/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch b/target/linux/at91/patches-5.15/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch new file mode 100644 index 0000000000..c99a2d5219 --- /dev/null +++ b/target/linux/at91/patches-5.15/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch @@ -0,0 +1,50 @@ +From 3de4879bf59b46a966ea226a67df70b88f43a23e Mon Sep 17 00:00:00 2001 +From: Eugen Hristev +Date: Fri, 9 Apr 2021 14:31:16 +0300 +Subject: [PATCH 196/247] ARM: at91: debug: add sama7g5 low level debug uart + +Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the +ROM bootloader uses. + +Signed-off-by: Eugen Hristev +Signed-off-by: Nicolas Ferre +Link: https://lore.kernel.org/r/20210409113116.482199-2-eugen.hristev@microchip.com +[claudiu.beznea: adapt to v5.10.27] +Signed-off-by: Claudiu Beznea +--- + arch/arm/Kconfig.debug | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/Kconfig.debug ++++ b/arch/arm/Kconfig.debug +@@ -191,6 +191,14 @@ choice + their output to the USART1 port on SAMV7 based + machines. + ++ config DEBUG_AT91_SAMA7G5_FLEXCOM3 ++ bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3" ++ select DEBUG_AT91_UART ++ depends on SOC_SAMA7G5 ++ help ++ Say Y here if you want kernel low-level debugging support ++ on the FLEXCOM3 port of SAMA7G5. ++ + config DEBUG_BCM2835 + bool "Kernel low-level debugging on BCM2835 PL011 UART" + depends on ARCH_BCM2835 && ARCH_MULTI_V6 +@@ -1731,6 +1739,7 @@ config DEBUG_UART_PHYS + default 0xd4017000 if DEBUG_MMP_UART2 + default 0xd4018000 if DEBUG_MMP_UART3 + default 0xe0000000 if DEBUG_SPEAR13XX ++ default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 + default 0xe4007000 if DEBUG_HIP04_UART + default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 + default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 +@@ -1791,6 +1800,7 @@ config DEBUG_UART_VIRT + default 0xc8912000 if DEBUG_RV1108_UART0 + default 0xe0010fe0 if ARCH_RPC + default 0xf0000be0 if ARCH_EBSA110 ++ default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3 + default 0xf0010000 if DEBUG_ASM9260_UART + default 0xf0100000 if DEBUG_DIGICOLOR_UA0 + default 0xf01fb000 if DEBUG_NOMADIK_UART