X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0193-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch;fp=target%2Flinux%2Fbrcm2708%2Fpatches-4.19%2F950-0193-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch;h=0000000000000000000000000000000000000000;hp=c67acaa50da26f2d80742a07550473d2be2a9c23;hb=7d7aa2fd924c27829ec25f825481554dd81bce97;hpb=e7bfda2c243e66a75ff966ba04c28b1590b5d24c

diff --git a/target/linux/brcm2708/patches-4.19/950-0193-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch b/target/linux/brcm2708/patches-4.19/950-0193-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch
deleted file mode 100644
index c67acaa50d..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0193-net-lan78xx-Support-auto-downshift-to-100Mb-s.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From a3c59bad71de2b3c09a25fd6ce5e3632c33c4bba Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 26 Nov 2018 19:46:58 +0000
-Subject: [PATCH] net: lan78xx: Support auto-downshift to 100Mb/s
-
-Ethernet cables with faulty or missing pairs (specifically pairs C and
-D) allow auto-negotiation to 1000Mbs, but do not support the successful
-establishment of a link. Add a DT property, "microchip,downshift-after",
-to configure the number of auto-negotiation failures after which it
-falls back to 100Mbs. Valid values are 2, 3, 4, 5 and 0, where 0 means
-never downshift.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/net/phy/microchip.c  | 32 ++++++++++++++++++++++++++++++++
- include/linux/microchipphy.h |  8 ++++++++
- 2 files changed, 40 insertions(+)
-
---- a/drivers/net/phy/microchip.c
-+++ b/drivers/net/phy/microchip.c
-@@ -228,6 +228,7 @@ static int lan88xx_probe(struct phy_devi
- 	struct device *dev = &phydev->mdio.dev;
- 	struct lan88xx_priv *priv;
- 	u32 led_modes[4];
-+	u32 downshift_after = 0;
- 	int len;
- 
- 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-@@ -257,6 +258,37 @@ static int lan88xx_probe(struct phy_devi
- 		return -EINVAL;
- 	}
- 
-+	if (!of_property_read_u32(dev->of_node,
-+				  "microchip,downshift-after",
-+				  &downshift_after)) {
-+		u32 mask = LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK;
-+		u32 val = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT;
-+
-+		switch (downshift_after) {
-+		case 2:
-+			val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2;
-+			break;
-+		case 3:
-+			val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3;
-+			break;
-+		case 4:
-+			val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4;
-+			break;
-+		case 5:
-+			val |= LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5;
-+			break;
-+		case 0:
-+			/* Disable completely */
-+			mask = LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT;
-+			val = 0;
-+			break;
-+		default:
-+			return -EINVAL;
-+		}
-+		(void)phy_modify_paged(phydev, 1, LAN78XX_PHY_CTRL3,
-+				       mask, val);
-+	}
-+
- 	/* these values can be used to identify internal PHY */
- 	priv->chip_id = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_ID);
- 	priv->chip_rev = phy_read_mmd(phydev, 3, LAN88XX_MMD3_CHIP_REV);
---- a/include/linux/microchipphy.h
-+++ b/include/linux/microchipphy.h
-@@ -73,6 +73,14 @@
- /* Registers specific to the LAN7800/LAN7850 embedded phy */
- #define LAN78XX_PHY_LED_MODE_SELECT		(0x1D)
- 
-+#define LAN78XX_PHY_CTRL3			(0x14)
-+#define LAN78XX_PHY_CTRL3_AUTO_DOWNSHIFT	(0x0010)
-+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_MASK	(0x000c)
-+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_2	(0x0000)
-+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_3	(0x0004)
-+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_4	(0x0008)
-+#define LAN78XX_PHY_CTRL3_DOWNSHIFT_CTRL_5	(0x000c)
-+
- /* DSP registers */
- #define PHY_ARDENNES_MMD_DEV_3_PHY_CFG		(0x806A)
- #define PHY_ARDENNES_MMD_DEV_3_PHY_CFG_ZD_DLY_EN_	(0x2000)