X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fgeneric-2.6%2Fpatches-2.6.30%2F920-04-spi-gpio-implement-spi-delay.patch;fp=target%2Flinux%2Fgeneric-2.6%2Fpatches-2.6.30%2F920-04-spi-gpio-implement-spi-delay.patch;h=0000000000000000000000000000000000000000;hp=19032881b81e2215320ac36f7288c36c94af9c29;hb=da1bb88a2b900f0392b731ec47c5e1bff956fd8f;hpb=6117c04c9416b295347fb45c37e430f01df1d0d9

diff --git a/target/linux/generic-2.6/patches-2.6.30/920-04-spi-gpio-implement-spi-delay.patch b/target/linux/generic-2.6/patches-2.6.30/920-04-spi-gpio-implement-spi-delay.patch
deleted file mode 100644
index 19032881b8..0000000000
--- a/target/linux/generic-2.6/patches-2.6.30/920-04-spi-gpio-implement-spi-delay.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-Implement the SPI-GPIO delay function for busses that need speed limitation.
-
---mb
-
-
-
---- a/drivers/spi/spi_gpio.c
-+++ b/drivers/spi/spi_gpio.c
-@@ -21,6 +21,7 @@
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/gpio.h>
-+#include <linux/delay.h>
- 
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_bitbang.h>
-@@ -69,6 +70,7 @@ struct spi_gpio {
-  *		#define	SPI_MOSI_GPIO	120
-  *		#define	SPI_SCK_GPIO	121
-  *		#define	SPI_N_CHIPSEL	4
-+ *		#undef NEED_SPIDELAY
-  *		#include "spi_gpio.c"
-  */
- 
-@@ -76,6 +78,7 @@ struct spi_gpio {
- #define DRIVER_NAME	"spi_gpio"
- 
- #define GENERIC_BITBANG	/* vs tight inlines */
-+#define NEED_SPIDELAY	1
- 
- /* all functions referencing these symbols must define pdata */
- #define SPI_MISO_GPIO	((pdata)->miso)
-@@ -120,12 +123,20 @@ static inline int getmiso(const struct s
- #undef pdata
- 
- /*
-- * NOTE:  this clocks "as fast as we can".  It "should" be a function of the
-- * requested device clock.  Software overhead means we usually have trouble
-- * reaching even one Mbit/sec (except when we can inline bitops), so for now
-- * we'll just assume we never need additional per-bit slowdowns.
-+ * NOTE:  to clock "as fast as we can", set spi_device.max_speed_hz
-+ * and spi_transfer.speed_hz to 0.
-+ * Otherwise this is a function of the requested device clock.
-+ * Software overhead means we usually have trouble
-+ * reaching even one Mbit/sec (except when we can inline bitops). So on small
-+ * embedded devices with fast SPI slaves you usually don't need a delay.
-  */
--#define spidelay(nsecs)	do {} while (0)
-+static inline void spidelay(unsigned nsecs)
-+{
-+#ifdef NEED_SPIDELAY
-+	if (unlikely(nsecs))
-+		ndelay(nsecs);
-+#endif /* NEED_SPIDELAY */
-+}
- 
- #define	EXPAND_BITBANG_TXRX
- #include <linux/spi/spi_bitbang.h>