X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fipq806x%2Ffiles-5.4%2Farch%2Farm%2Fboot%2Fdts%2Fqcom-ipq8064-ea8500.dts;fp=target%2Flinux%2Fipq806x%2Ffiles-5.4%2Farch%2Farm%2Fboot%2Fdts%2Fqcom-ipq8064-ea8500.dts;h=0000000000000000000000000000000000000000;hp=9b01ae03282a497384c6c71076b0ed20dbca286e;hb=29ca10e537ee807283cfd8a58817270d233a021d;hpb=a7afeb31421bd6810c903468b23734baa6999438

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
deleted file mode 100644
index 9b01ae0328..0000000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-#include "qcom-ipq8064-eax500.dtsi"
-
-/ {
-	model = "Linksys EA8500 WiFi Router";
-	compatible = "linksys,ea8500", "qcom,ipq8064";
-
-	memory@0 {
-		reg = <0x42000000 0x1e000000>;
-		device_type = "memory";
-	};
-
-	aliases {
-		mdio-gpio0 = &mdio0;
-
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		wifi {
-			label = "wifi";
-			gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps {
-			label = "wps";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		wps {
-			label = "green:wps";
-			gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_power: power {
-			label = "white:power";
-			gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-
-		wifi {
-			label = "green:wifi";
-			gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&qcom_pinmux {
-	button_pins: button_pins {
-		mux {
-			pins = "gpio65", "gpio67", "gpio68";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	led_pins: led_pins {
-		mux {
-			pins = "gpio6", "gpio53", "gpio54";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-};
-
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&partitions {
-	partition@5f80000 {
-		label = "syscfg";
-		reg = <0x5f80000 0x2080000>;
-	};
-};
-
-&mdio0 {
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-	};
-};
-
-&gmac1 {
-	qcom,phy_mdio_addr = <4>;
-	qcom,poll_required = <1>;
-	qcom,rgmii_delay = <0>;
-	qcom,emulation = <0>;
-};
-
-/* LAN */
-&gmac2 {
-	qcom,phy_mdio_addr = <0>;	/* none */
-	qcom,poll_required = <0>;	/* no polling */
-	qcom,rgmii_delay = <0>;
-	qcom,emulation = <0>;
-};