X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fmediatek%2Fpatches-4.4%2F0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch;fp=target%2Flinux%2Fmediatek%2Fpatches-4.4%2F0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch;h=0000000000000000000000000000000000000000;hp=afb01748f1665595004fa719626c7e50e9409d7e;hb=53f5d59fa17049d94a3992d1067ded1fa90f61f8;hpb=f885edef5a3bfcddcfe85732ee65c1d475c4a8f6;ds=sidebyside

diff --git a/target/linux/mediatek/patches-4.4/0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch b/target/linux/mediatek/patches-4.4/0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch
deleted file mode 100644
index afb01748f1..0000000000
--- a/target/linux/mediatek/patches-4.4/0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 297ef52cd21e28da671996d7b4f39f268d2d0ec1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 29 Mar 2016 14:32:07 +0200
-Subject: [PATCH 070/102] net: mediatek: update the IRQ part of the binding
- document
-
-The current binding document only describes a single interrupt. Update the
-document by adding the 2 other interrupts.
-
-The driver currently only uses a single interrupt. The HW is however able
-to using IRQ grouping to split TX and RX onto separate GIC irqs.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
- Acked-by: Rob Herring <robh@kernel.org>
----
- Documentation/devicetree/bindings/net/mediatek-net.txt |    7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/Documentation/devicetree/bindings/net/mediatek-net.txt
-+++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
-@@ -9,7 +9,8 @@ have dual GMAC each represented by a chi
- Required properties:
- - compatible: Should be "mediatek,mt2701-eth"
- - reg: Address and length of the register set for the device
--- interrupts: Should contain the frame engines interrupt
-+- interrupts: Should contain the three frame engines interrupts in numeric
-+	order. These are fe_int0, fe_int1 and fe_int2.
- - clocks: the clock used by the core
- - clock-names: the names of the clock listed in the clocks property. These are
- 	"ethif", "esw", "gp2", "gp1"
-@@ -42,7 +43,9 @@ eth: ethernet@1b100000 {
- 		 <&ethsys CLK_ETHSYS_GP2>,
- 		 <&ethsys CLK_ETHSYS_GP1>;
- 	clock-names = "ethif", "esw", "gp2", "gp1";
--	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
-+	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
-+		      GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
-+		      GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
- 	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
- 	resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
- 	reset-names = "eth";