X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Fmediatek%2Fpatches-4.4%2F0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch;fp=target%2Flinux%2Fmediatek%2Fpatches-4.4%2F0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch;h=b2ceb87087d8c79f9aa745993fd875ce65e5b563;hp=0000000000000000000000000000000000000000;hb=f5f173e2b794bd996fa6171bb6b18f13c4ed1e90;hpb=a39ac242cc3ec0c2d39342754d86ec97e9e4fb32

diff --git a/target/linux/mediatek/patches-4.4/0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch b/target/linux/mediatek/patches-4.4/0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch
new file mode 100644
index 0000000000..b2ceb87087
--- /dev/null
+++ b/target/linux/mediatek/patches-4.4/0070-net-mediatek-update-the-IRQ-part-of-the-binding-docu.patch
@@ -0,0 +1,46 @@
+From 297ef52cd21e28da671996d7b4f39f268d2d0ec1 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Tue, 29 Mar 2016 14:32:07 +0200
+Subject: [PATCH 070/102] net: mediatek: update the IRQ part of the binding
+ document
+
+The current binding document only describes a single interrupt. Update the
+document by adding the 2 other interrupts.
+
+The driver currently only uses a single interrupt. The HW is however able
+to using IRQ grouping to split TX and RX onto separate GIC irqs.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+ Acked-by: Rob Herring <robh@kernel.org>
+---
+ Documentation/devicetree/bindings/net/mediatek-net.txt |    7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
+index 5ca7929..32eaaca 100644
+--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
++++ b/Documentation/devicetree/bindings/net/mediatek-net.txt
+@@ -9,7 +9,8 @@ have dual GMAC each represented by a child node..
+ Required properties:
+ - compatible: Should be "mediatek,mt7623-eth"
+ - reg: Address and length of the register set for the device
+-- interrupts: Should contain the frame engines interrupt
++- interrupts: Should contain the three frame engines interrupts in numeric
++	order. These are fe_int0, fe_int1 and fe_int2.
+ - clocks: the clock used by the core
+ - clock-names: the names of the clock listed in the clocks property. These are
+ 	"ethif", "esw", "gp2", "gp1"
+@@ -42,7 +43,9 @@ eth: ethernet@1b100000 {
+ 		 <&ethsys CLK_ETHSYS_GP2>,
+ 		 <&ethsys CLK_ETHSYS_GP1>;
+ 	clock-names = "ethif", "esw", "gp2", "gp1";
+-	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
++	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
++		      GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
++		      GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+ 	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+ 	resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
+ 	reset-names = "eth";
+-- 
+1.7.10.4
+