X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=blobdiff_plain;f=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F10-rt2x00-eeprom;fp=target%2Flinux%2Framips%2Fbase-files%2Fetc%2Fhotplug.d%2Ffirmware%2F10-rt2x00-eeprom;h=0000000000000000000000000000000000000000;hp=f33ed82f625cce9f8aae6471ccc8a0c7b549149d;hb=19724e28c81e3ff642f09c49f612cd147c54a697;hpb=0975c35b83a632f9662d1944307f87da9db06154

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
deleted file mode 100644
index f33ed82f62..0000000000
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-jboot_eeprom_extract() {
-	local part=$1
-	local offset=$2
-	local mtd
-
-	mtd=$(find_mtd_part $part)
-	[ -n "$mtd" ] || \
-		caldata_die "no mtd device found for partition $part"
-
-	jboot_config_read -i $mtd -o $offset -e /lib/firmware/$FIRMWARE  2>/dev/null || \
-		caldata_die "failed to extract from $mtd"
-}
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"soc_wmac.eeprom")
-	case $board in
-	dlink,dir-510l|\
-	dlink,dwr-116-a1|\
-	dlink,dwr-118-a1|\
-	dlink,dwr-118-a2|\
-	dlink,dwr-921-c1|\
-	dlink,dwr-922-e2|\
-	lava,lr-25g001)
-		wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000)
-		wifi_mac=$(macaddr_add "$wan_mac" 1)
-		jboot_eeprom_extract "config" 0xE000
-		caldata_patch_mac $wifi_mac 0x4
-		;;
-	dovado,tiny-ac)
-		wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
-		caldata_extract "factory" 0x0 0x200
-		caldata_patch_mac $wifi_mac 0x4
-		;;
-	*)
-		caldata_die "Please define mtd-eeprom in $board DTS file!"
-		;;
-	esac
-	;;
-esac