From: Thomas Vincent-Cross Date: Mon, 22 Oct 2018 15:21:16 +0000 (+1100) Subject: ramips: add support for Wavlink WL-WN570HA1 X-Git-Tag: v19.07.0-rc1~2064 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=a160f50d4f240019fafe95e80701ebb871c788fe ramips: add support for Wavlink WL-WN570HA1 This commit adds support for the Wavlink WL-WN570HA1, a dual-band PoE wireless router with the following specifications: - CPU: MediaTek MT7688AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 1x 10/100Mbps - 2.4 GHz: 802.11b/g/n SoC, 1T1R, 27 dBm - 5 GHz: 802.11a/n/ac MT7610E, 1T1R, 25 dBm - Antennas: 2x external (1 per radio), detachable - LEDs: 3 programmable + Wi-Fi, WAN/LAN, Power - Buttons: Reset Flashing instructions: Factory U-boot launches a TFTP client if reset button is pressed during power-on. Rename the sysupgrade file and configure TFTP as follows: - Client (WL-WN570HA1) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Thomas Vincent-Cross [use generic board detection, add firmware partition compatible] Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index fb288de09b..4330254c8f 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -370,6 +370,14 @@ vocore-16M) w502u) set_wifi_led "rt2800pci-phy0::radio" ;; +wavlink,wl-wn570ha1) + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49" + ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84" + ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100" + set_wifi_led "$boardname:green:wifi" + ;; we1026-5g-16m) ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0" set_wifi_led "we1026-5g:green:wifi" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 6f60683fc2..cdba37d38f 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -117,6 +117,7 @@ ramips_setup_interfaces() sk-wb8|\ u7621-06-256M-16M|\ vr500|\ + wavlink,wl-wn570ha1|\ wf-2881|\ whr-g300n|\ mqmaker,witi-256m|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index e4ddc0eec4..fc73f37e29 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -178,6 +178,7 @@ platform_check_image() { w306r-v20|\ w502u|\ ravpower,wd03|\ + wavlink,wl-wn570ha1|\ wf-2881|\ whr-1166d|\ whr-300hp2|\ diff --git a/target/linux/ramips/dts/WL-WN570HA1.dts b/target/linux/ramips/dts/WL-WN570HA1.dts new file mode 100644 index 0000000000..14ca115607 --- /dev/null +++ b/target/linux/ramips/dts/WL-WN570HA1.dts @@ -0,0 +1,136 @@ +/dts-v1/; +#include +#include + +#include "mt7628an.dtsi" + +/ { + compatible = "wavlink,wl-wn570ha1", "mediatek,mt7628an-soc"; + model = "Wavlink WL-WN570HA1"; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "wl-wn570ha1:green:power"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wan { + label = "wl-wn570ha1:green:wan"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + wifi-high { + label = "wl-wn570ha1:green:wifi-high"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + wifi-med { + label = "wl-wn570ha1:green:wifi-med"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + }; + + wifi-low { + label = "wl-wn570ha1:green:wifi-low"; + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "wl-wn570ha1:green:wifi"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "wled_an", "p0led_an", "wdt", "refclk"; + ralink,function = "gpio"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&wmac { + status = "okay"; +}; + +ðernet { + mtd-mac-address = <&factory 0x2e>; + mediatek,portmap = "llllw"; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 3174988f49..af5b0f6d60 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -321,6 +321,14 @@ define Device/vocore2lite endef TARGET_DEVICES += vocore2lite +define Device/wavlink_wl-wn570ha1 + DTS := WL-WN570HA1 + IMAGE_SIZE := $(ralink_default_fw_size_8M) + DEVICE_TITLE := Wavlink WL-WN570HA1 + DEVICE_PACKAGES := kmod-mt76x0e +endef +TARGET_DEVICES += wavlink_wl-wn570ha1 + define Device/wcr-1166ds DTS := WCR-1166DS BUFFALO_TAG_PLATFORM := MTK