From: David Bauer Date: Fri, 18 May 2018 21:37:49 +0000 (+0200) Subject: ramips: change wifi led trigger for Archer C50v3 X-Git-Tag: v19.07.0-rc1~3667 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=ce91c85e01050cb19c89c9a19369a56a94619e7f ramips: change wifi led trigger for Archer C50v3 This commit alters the TP-Link Archer C50v3 LED settings to use the phy trigger instead of the netdev one. This way the WiFi status is displayed even if the wifi interface name is altered. Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index b5de388764..88e4c2b7fe 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -410,8 +410,8 @@ tplink,c20-v4) tplink,c50-v3) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" - ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan1" - set_wifi_led "$boardname:green:wlan5g" + ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" ;; tplink,tl-mr3420-v5) set_usb_led "$boardname:green:usb"