bcm53xx: update DTS files with the latest changes
[openwrt/openwrt.git] / target / linux / bcm53xx / base-files /
2022-10-21 Linus Walleijbcm53xx: only fixup seama on D-Link DIR-885L
2022-07-15 Christian Lamparterbcm53xx: add support for Meraki MR26
2022-06-24 Rafał Miłeckibcm53xx: enable & setup packet steering
2022-06-19 Christian Lamparterbcm53xx: remove 07_set_preinit_iface_bcm53xx
2022-05-13 Christian Lamparterbcm53xx: remove MR32's specific get_leds_dt code
2022-05-04 Arınç ÜNALpackages: nvram: add NVRAM quirks for bcm53xx target
2022-03-29 Rafał Miłeckibcm53xx: drop dead upgrade code
2022-03-29 Arınç ÜNALbcm53xx: add support for Asus RT-AC88U
2021-12-13 Rafał Miłeckibcm53xx: sysupgrade: fix support for Luxul's legacy...
2021-12-02 Rafał Miłeckibcm53xx: sysupgrade: refactor handling different firmwa...
2021-12-02 Rafał Miłeckibcm53xx: sysupgrade: simplify extracting image from...
2021-10-22 Rafał Miłeckibcm53xx: bridge all LAN ports on Linksys EA9500
2021-10-21 Rafał Miłeckibcm53xx: switch to the upstream DSA-based b53 driver
2021-09-23 Christian Lamparterbcm53xx: MR32: read mac-address from eeprom
2021-04-21 Rafał Miłeckibcm53xx: fix Luxul XWR-3150 LAN ports numbering
2021-04-01 Vivek Ununebcm53xx: enhance support for Linksys EA9500
2021-03-06 Adrian Schmutzlertreewide: remove execute bit and shebang from board...
2020-09-25 Christian Lamparterbcm53xx: add Cisco Meraki MR32
2020-08-18 Adrian SchmutzlerRevert "bcm53xx: remove useless echo in 02_network"
2020-08-17 Adrian Schmutzlerbcm53xx: remove useless echo in 02_network
2020-06-16 Adrian Schmutzlertreewide: drop shebang from non-executable target files
2020-04-07 Dan Haabbcm53xx: add support for Luxul FullMAC WiFi devices
2020-04-03 Rafał Miłeckibcm53xx: refactor board.d code in 02_network
2020-03-21 Rafał Miłeckibcm53xx: sysupgrade: optimize building UBI image
2020-02-07 Dan Haabbcm53xx: build images for Luxul ABR-4500 and XBR-4500...
2019-10-15 Dan Haabbcm53xx: sysupgrade: support Luxul NAND devices
2019-10-04 Rafał Miłeckibcm53xx: fix sysupgrade for Luxul XWC-2000
2019-09-16 Dan Haabbcm53xx: sysupgrade: support Luxul firmware format
2019-09-06 Rafał Miłeckibcm53xx: extend firmware validation
2019-07-08 Rafał Miłeckibcm53xx: sysupgrade: call nand_do_upgrade() from platfo...
2019-01-20 Hao Dongbcm53xx: add support for Phicomm K3
2018-07-28 Rafał Miłeckibcm53xx: backport BCM5301X/BCM53573 dts commits from...
2018-06-18 Rafał Miłeckibcm53xx: exit if writing kernel during sysupgrade fails
2018-02-27 Rafał Miłeckibcm53xx: fix fallback code for picking status LED
2017-12-29 Rafał Miłeckibcm53xx: use iflag=skip_bytes for dd command during...
2017-07-15 Mathias Kresintreewide: use only board_name function to get name
2017-07-15 Mathias Kresintreewide: use the generic board_name function
2017-07-11 Matthias Schifferbase-files: automatically handle paths and symlinks...
2017-07-11 Matthias Schifferbcm53xx: upgrade: fix RAMFS_COPY_*
2017-02-07 Rafał Miłeckibcm53xx: add missing system.sh include
2017-02-06 Rafał Miłeckibcm53xx: set Netgear R8000 USB LEDs
2017-02-03 Rafał Miłeckibcm53xx: set WAN MAC address to don't share one with...
2017-02-01 Rafał Miłeckibcm53xx: fix LAN MAC address for devices that use eth2...
2017-01-30 Felix Fietkaubcm53xx: suppress osafeloader info error messages durin...
2016-11-19 Rafał Miłeckibcm53xx: build image for TP-LINK Archer C9 v1
2016-11-19 Rafał Miłeckibcm53xx: support SafeLoader format in sysupgrade
2016-11-14 Felix Fietkaubcm53xx: add switch config for Buffalo WXR-1900DHP...
2016-08-18 Rafał Miłeckibcm53xx: generate proper network config for Tenda AC9
2016-08-14 Rafał Miłeckibcm53xx: drop target's preinit network support script
2016-07-04 Rafał Miłeckibcm53xx: calculate Seama MD5 using content of kernel...
2016-06-20 Rafał Miłeckibcm53xx: properly support sysupgrade using Seama on...
2016-06-13 Rafał Miłeckibcm53xx: sysupgrade: move TRX specific code to separate...
2016-06-10 Rafał Miłeckibcm53xx: pass datasize to mtd in hexadecimal format
2016-06-10 Rafał Miłeckibcm53xx: fix partition typos in 09_fix_crc
2016-06-10 Rafał Miłeckibcm53xx: calculate TRX CRC32 using whole kernel partition
2016-05-18 Rafał Miłeckibcm53xx: drop Copyright header from two of my bash...
2016-04-09 Rafał Miłeckibcm53xx: add switch config workaround for R8500 and...
2016-04-09 Rafał Miłeckibcm53xx: fix regression in generating network config
2016-04-09 Rafał Miłeckibcm53xx: add basic support for Netgear R7900
2016-02-03 Rafał Miłeckibcm53xx: start working on Netgear R8500
2016-01-30 Rafał Miłeckibcm53xx: support Netgear R8500 in sysupgrade
2016-01-29 Rafał Miłeckibcm53xx: specify magic expected in sysupgrade for D...
2016-01-28 Rafał Miłeckibcm53xx: basic support for Seama format in sysupgrade
2016-01-28 Rafał Miłeckibcm53xx: fix MD5 in Seama format on flash after install...
2016-01-27 Rafał Miłeckibcm53xx: detect Seama sysupgrade format
2015-12-11 Jo-Philipp Wichall: drop old uci-defaults.sh
2015-12-03 Jo-Philipp Wichall: remove dummy ucidef_set_interface_loopback() from...
2015-12-03 Jo-Philipp Wichboard.d: remove redundant ucidef_set_interfaces_lan_wan...
2015-12-03 Jo-Philipp Wichboard.d: merge ucidef_add_switch() and ucidef_add_switc...
2015-12-02 Jo-Philipp Wichbcm53xx: switch to ucidef_add_switch_ports()
2015-10-30 Rafał Miłeckibcm53xx: add workaround for Netgear R8000 network
2015-08-26 Rafał Miłeckibcm53xx: support sysupgrade with Netgear R7000 original...
2015-06-06 Rafał Miłeckibcm53xx: fallback to default_do_upgrade if NAND upgrade...
2015-06-06 Rafał Miłeckibcm53xx: sysupgrade: drop useless shift in platform.sh
2015-06-06 Rafał Miłeckibcm53xx: extract TRX from image on the fly
2015-06-06 Rafał Miłeckibcm53xx: sysupgrade: extract TRX partitions directly...
2015-05-16 Rafał Miłeckibcm53xx: try to fix network on Asus RT-AC87U
2015-05-13 Rafał Miłeckibcm53xx: fix default network interface on Netgear R8000
2015-04-24 Rafał Miłeckibcm53xx: sort ports from NVRAM entries before matching...
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: check if new kernel fits partition...
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: improve NAND warnings
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: drop some debugging message
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: allow flashing NAND devices withou...
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: support flashing TRX with UBI...
2015-04-17 Rafał Miłeckibcm53xx: fix handling absolute paths in sysupgrade...
2015-04-16 Felix Fietkaubcm53xx: make use of the new board detection layer
2015-04-14 Rafał Miłeckibcm53xx: add (disabled) support for upgrading kernel...
2015-04-14 Rafał Miłeckiotrx: change command line API to start with a mode
2015-04-12 Rafał Miłeckibcm53xx: try to handle Netgear R8000 VLANs config
2015-04-12 Rafał Miłeckibcm53xx: allow sysupgrade firmwares without UBI contain...
2015-04-12 Rafał Miłeckibcm53xx: add platform_pre_upgrade to prepare for kernel...
2015-04-12 Rafał Miłeckibcm53xx: rework vendor fw handling to don't duplicate...
2015-04-09 Rafał Miłeckibcm53xx: switch to the otrx for verifying TRX images
2015-04-07 Rafał Miłeckibcm53xx: image: share function checking TRX in provided...
2015-04-07 Rafał Miłeckibcm53xx: display all errors (not just the 1st one)...
2015-04-07 Rafał Miłeckibcm53xx: compare provided firmware magic with device...
2014-12-30 Rafał Miłeckibcm53xx: support flashing CHK and CyberTAN images
2014-12-20 Rafał Miłeckibcm53xx: support WAN connected to switch port 0
2014-12-15 Rafał Miłeckibcm53xx: sysupgrade support for devices with serial...
2014-12-15 John Crispinadd "preinit_regular" diag.sh set_state argument
next