openwrt/openwrt.git
9 years agoall: replace genext2fs with make_ext4fs
Jo-Philipp Wich [Mon, 20 Apr 2015 13:57:43 +0000 (13:57 +0000)]
all: replace genext2fs with make_ext4fs

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45517

9 years agonetfilter.mk: remove obsolete ip_nat_ftp related line
Felix Fietkau [Mon, 20 Apr 2015 13:36:25 +0000 (13:36 +0000)]
netfilter.mk: remove obsolete ip_nat_ftp related line

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45516

9 years agonetfilter.mk: move IRC conntrack/nat helpers to kmod-nf-nathelper-extra
Felix Fietkau [Mon, 20 Apr 2015 13:36:02 +0000 (13:36 +0000)]
netfilter.mk: move IRC conntrack/nat helpers to kmod-nf-nathelper-extra

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45515

9 years agoodhcp6c: fix SOL_MAX_RT to match RFC 3315
Steven Barth [Mon, 20 Apr 2015 09:17:13 +0000 (09:17 +0000)]
odhcp6c: fix SOL_MAX_RT to match RFC 3315

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45514

9 years agonftables: bump version
Steven Barth [Mon, 20 Apr 2015 06:30:34 +0000 (06:30 +0000)]
nftables: bump version

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45513

9 years agoiproute2: update to v4.0.0
Steven Barth [Mon, 20 Apr 2015 06:26:09 +0000 (06:26 +0000)]
iproute2: update to v4.0.0

The most significant change from the previous version is the trimming of
the 300-ip_tiny.patch to lib/utils.c where a section previously patched
had vanished.  That section of the patch was removed.

Built and lightly tested on ar71xx against uClibc and musl.

Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 45512

9 years agoRevert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)
Felix Fietkau [Sun, 19 Apr 2015 19:19:12 +0000 (19:19 +0000)]
Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)

Profile definitions need to be checked and fixed before this patch can
be applied again.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45511

9 years agolibnl-tiny: link library with -Bsymbolic-functions
Felix Fietkau [Sun, 19 Apr 2015 18:33:19 +0000 (18:33 +0000)]
libnl-tiny: link library with -Bsymbolic-functions

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45510

9 years agolua: link library with -Bsymbolic-functions
Felix Fietkau [Sun, 19 Apr 2015 18:33:13 +0000 (18:33 +0000)]
lua: link library with -Bsymbolic-functions

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45509

9 years agocmake.mk: enable -Bsymbolic-functions by default for linking shared libs, slightly...
Felix Fietkau [Sun, 19 Apr 2015 18:33:07 +0000 (18:33 +0000)]
cmake.mk: enable -Bsymbolic-functions by default for linking shared libs, slightly improves performance and compression

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45508

9 years agoramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout
Felix Fietkau [Sun, 19 Apr 2015 16:31:54 +0000 (16:31 +0000)]
ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45507

9 years agokernel: refresh generic patches
Jonas Gorski [Sun, 19 Apr 2015 11:38:46 +0000 (11:38 +0000)]
kernel: refresh generic patches

Refresh patches to remove the trailing whitespaces caused by an old
diffutils version on osx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45506

9 years agobrcm63xx: fix bcm63268 rgmii port rgmii configuration
Jonas Gorski [Sun, 19 Apr 2015 11:38:42 +0000 (11:38 +0000)]
brcm63xx: fix bcm63268 rgmii port rgmii configuration

This should rather be done by passing appropriate platform_data/OF, but
should suffice for now.

Fixes e.g. GbE ports on BCM963268BU_P300.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45505

9 years agobrcm63xx: allow using all four rgmii ports on bcm6316x
Jonas Gorski [Sun, 19 Apr 2015 11:38:24 +0000 (11:38 +0000)]
brcm63xx: allow using all four rgmii ports on bcm6316x

At least the third rgmii port is available on 63169, so assume all are
available. Simplifies cpu vs. variant handling.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45504

9 years agonetifd: update to the latest version, fixes more interface device config handling...
Felix Fietkau [Sun, 19 Apr 2015 09:50:49 +0000 (09:50 +0000)]
netifd: update to the latest version, fixes more interface device config handling issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45503

9 years agobrcm63xx: BCM963268BU_P300 reference board fixes
Jonas Gorski [Sat, 18 Apr 2015 22:33:50 +0000 (22:33 +0000)]
brcm63xx: BCM963268BU_P300 reference board fixes

- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45499

9 years agoimage.mk: do not emit multiple target definitions for kernel images
Felix Fietkau [Sat, 18 Apr 2015 21:35:22 +0000 (21:35 +0000)]
image.mk: do not emit multiple target definitions for kernel images

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45498

9 years agonetifd: update to the latest version, fixes more device config handling issues
Felix Fietkau [Sat, 18 Apr 2015 21:35:16 +0000 (21:35 +0000)]
netifd: update to the latest version, fixes more device config handling issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45497

9 years agobase-files: make the generic sysinfo script run earlier to allow the mount_root scrip...
Felix Fietkau [Sat, 18 Apr 2015 20:14:38 +0000 (20:14 +0000)]
base-files: make the generic sysinfo script run earlier to allow the mount_root script to pick up the board name

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45496

9 years agoimage.mk: force rebuild of kernel dependent parts - fixes auto-rebuild on DTS changes
Felix Fietkau [Sat, 18 Apr 2015 19:32:20 +0000 (19:32 +0000)]
image.mk: force rebuild of kernel dependent parts - fixes auto-rebuild on DTS changes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45495

9 years agoiptables: remove obsolete files
Felix Fietkau [Sat, 18 Apr 2015 17:59:31 +0000 (17:59 +0000)]
iptables: remove obsolete files

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45494

9 years agodropbear: update to 2015.67
Steven Barth [Sat, 18 Apr 2015 11:25:01 +0000 (11:25 +0000)]
dropbear: update to 2015.67

fixes dbclient login into OpenSSH 6.8p1
error: "Bad hostkey signature"

reported on irc, replicated with Arch Linux

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45493

9 years agohostapd: Fix wps button hotplug script to handle multiple radios
John Crispin [Sat, 18 Apr 2015 10:19:37 +0000 (10:19 +0000)]
hostapd: Fix wps button hotplug script to handle multiple radios

Hostapd's control file location was changed in 2013, and that has apparently
broken the wps button hotplug script in cases where there are multiple radios
and wps is possibly configured also for the second radio. The current wps
button hotplug script always handles only the first radio.

https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/wps-hotplug.sh

The reason is that the button hotplug script seeks directories like
/var/run/hostapd*, as the hostapd-phy0.conf files were earlier in
per-interface subdirectories.

Currently the *.conf files are directly in /var/run and the control sockets
are in /var/run/hostapd, but there is no subdirectory for each radio.

root@OpenWrt:/# ls /var/run/hostapd*
/var/run/hostapd-phy0.conf  /var/run/hostapd-phy1.conf

/var/run/hostapd:
wlan0  wlan1

The hotplug script was attempted to be fixed after the hostapd change by
r38986 in Dec2013, but that change only unbroke the script for the first
radio, but left it broken for multiple radios.
https://dev.openwrt.org/changeset/38986/

The script fails to find subdirectories with [ -d "$dir" ], and passes just
the only found directory /var/run/hostapd, leading into activating only the
first radio, as hostapd_cli defaults to first socket found inthe passed
directory:
root@OpenWrt:/# hostapd_cli -?
...
usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvB] [-a<path>] \
                    [-G<ping interval>] [command..]
...
    -p<path>     path to find control sockets (default: /var/run/hostapd)
...
    -i<ifname>   Interface to listen on (default: first interface found in the
                 socket path)

Below is a run with the default script and with my proposed solution.

Default script (with logging added):
==================================
root@OpenWrt:/# cat /etc/rc.button/wps
#!/bin/sh

if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
         for dir in /var/run/hostapd*; do
                 [ -d "$dir" ] || continue
                 logger "WPS activated for: $dir"
                 hostapd_cli -p "$dir" wps_pbc
         done
fi

 >>>> WPS BUTTON PRESSED <<<<<

root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status
PBC Status: Timed-out
Last WPS result: None
root@OpenWrt:/# logread | grep WPS
Tue Apr 14 18:38:50 2015 user.notice root: WPS activated for: /var/run/hostapd

wlan0 got WPS activated, while wlan1 remained inactive.

I have modified the script to search for sockets instead of directories and
to use the "-i" option with hostapd_cli, and now the script properly
activates wps for both radios. As "-i" needs the interface name instead of
the full path, the script first changes dir to /var/run/hostapd to get simply
the interface names.

Modified script (with logging):
===============================
root@OpenWrt:/# cat /etc/rc.button/wps
#!/bin/sh

if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
         cd /var/run/hostapd
         for dir in *; do
                 [ -S "$socket" ] || continue
                 logger "WPS activated for: $socket"
                 hostapd_cli -i "$socket" wps_pbc
         done
fi

 >>>> WPS BUTTON PRESSED <<<<<

root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# logread | grep WPS
Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan0
Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan1

Both radios got their WPS activated properly.

I am not sure if my solution is optimal, but it seems to work. WPS button is
maybe not that often used functionality, but it might be fixed in any case.
Routers with multiple radios are common now, so the bug is maybe more
prominent than earlier.

The modified script has been in a slightly different format in my community
build since r42420 in September 2014.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45492

9 years agoar71xx/image: remove duplicated rootfs in new tplink initramfs images
John Crispin [Sat, 18 Apr 2015 10:19:28 +0000 (10:19 +0000)]
ar71xx/image: remove duplicated rootfs in new tplink initramfs images

The new building code included the rootfs twice when building tplink initramfs images.
To make it more readable move initramfs into an own build step
Build/mktplinkfw-initramfs.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45491

9 years agoar71xx/image: move TPLINK-LZMA image to new build code
John Crispin [Sat, 18 Apr 2015 10:19:23 +0000 (10:19 +0000)]
ar71xx/image: move TPLINK-LZMA image to new build code

There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45490

9 years agoar71xx/image: add template tplink-16mlzma
John Crispin [Sat, 18 Apr 2015 10:19:14 +0000 (10:19 +0000)]
ar71xx/image: add template tplink-16mlzma

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45489

9 years agoar71xx/image: fix imagesize of template tplink-8mlzma
John Crispin [Sat, 18 Apr 2015 10:19:09 +0000 (10:19 +0000)]
ar71xx/image: fix imagesize of template tplink-8mlzma

The new image size is verified by a running tplink device and checked
against mktplinkfw source code.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45488

9 years agoRemoved reference to imaginary procd_add_interface_reload in procd.sh
John Crispin [Sat, 18 Apr 2015 10:19:02 +0000 (10:19 +0000)]
Removed reference to imaginary procd_add_interface_reload in procd.sh

The last line of procd.sh has a reference to procd_add_interface_reload. procd_add_interface_reload
doesn't seem to exist. I've removed the reference of it to minimize confusion.

Signed-off-by: Eric Schultz <eschultz@prplfoundation.org>
SVN-Revision: 45487

9 years agobrcm63xx: fix bcm96318ref_p300 profile name
Jonas Gorski [Sat, 18 Apr 2015 09:34:17 +0000 (09:34 +0000)]
brcm63xx: fix bcm96318ref_p300 profile name

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45486

9 years agonetifd: update to the latest version, fixes issues in handling device config from...
Felix Fietkau [Fri, 17 Apr 2015 19:28:10 +0000 (19:28 +0000)]
netifd: update to the latest version, fixes issues in handling device config from interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45483

9 years agoqos-scripts: drop obsolete depdendency on iptabes-mod-filter (#19506)
Felix Fietkau [Fri, 17 Apr 2015 18:52:28 +0000 (18:52 +0000)]
qos-scripts: drop obsolete depdendency on iptabes-mod-filter (#19506)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45482

9 years agoiptables: remove layer7 leftovers (#19506)
Felix Fietkau [Fri, 17 Apr 2015 18:52:24 +0000 (18:52 +0000)]
iptables: remove layer7 leftovers (#19506)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45481

9 years agobcm53xx: add profiling support
Felix Fietkau [Fri, 17 Apr 2015 18:52:15 +0000 (18:52 +0000)]
bcm53xx: add profiling support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45480

9 years agonetwork: also shorten virtual interface names of ppp and 3g/4g connections
Steven Barth [Fri, 17 Apr 2015 14:47:12 +0000 (14:47 +0000)]
network: also shorten virtual interface names of ppp and 3g/4g connections

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45479

9 years agoimx6: put uboot-envtools in DEFAULT_PACKAGES
Luka Perkov [Fri, 17 Apr 2015 13:47:13 +0000 (13:47 +0000)]
imx6: put uboot-envtools in DEFAULT_PACKAGES

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45478

9 years agokirkwood: put uboot-envtools in DEFAULT_PACKAGES
Luka Perkov [Fri, 17 Apr 2015 13:47:09 +0000 (13:47 +0000)]
kirkwood: put uboot-envtools in DEFAULT_PACKAGES

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45477

9 years agonetwork: shorten names of generated interfaces
Steven Barth [Fri, 17 Apr 2015 13:10:19 +0000 (13:10 +0000)]
network: shorten names of generated interfaces

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45476

9 years agokernel: mark kmod-usb-bcma/ssb as hidden, they are only selected from ohci/ehci
Felix Fietkau [Fri, 17 Apr 2015 11:56:28 +0000 (11:56 +0000)]
kernel: mark kmod-usb-bcma/ssb as hidden, they are only selected from ohci/ehci

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45475

9 years agobrcm47xx: add buttons support for WRT310N v2
Rafał Miłecki [Fri, 17 Apr 2015 08:12:00 +0000 (08:12 +0000)]
brcm47xx: add buttons support for WRT310N v2

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45474

9 years agobcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
Rafał Miłecki [Fri, 17 Apr 2015 06:03:00 +0000 (06:03 +0000)]
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45473

9 years agobrcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
Rafał Miłecki [Fri, 17 Apr 2015 05:45:46 +0000 (05:45 +0000)]
brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45472

9 years agobusybox: fix an ash regression in handling local variables
Felix Fietkau [Fri, 17 Apr 2015 00:01:29 +0000 (00:01 +0000)]
busybox: fix an ash regression in handling local variables

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45471

9 years agobrcm47xx: rework vendor fw handling to don't duplicate upgrade calls
Rafał Miłecki [Thu, 16 Apr 2015 21:43:27 +0000 (21:43 +0000)]
brcm47xx: rework vendor fw handling to don't duplicate upgrade calls

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45470

9 years agobrcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
Rafał Miłecki [Thu, 16 Apr 2015 21:20:37 +0000 (21:20 +0000)]
brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k

The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected.  The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2.  Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45469

9 years agokernel: accidentally committed a few patches in the wrong place, move them
Felix Fietkau [Thu, 16 Apr 2015 20:43:11 +0000 (20:43 +0000)]
kernel: accidentally committed a few patches in the wrong place, move them

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468

9 years agobcm53xx: add power button for WXR-1900DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:55 +0000 (20:09 +0000)]
bcm53xx: add power button for WXR-1900DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467

9 years agobcm53xx: add power button for Buffalo WZR-1750DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:48 +0000 (20:09 +0000)]
bcm53xx: add power button for Buffalo WZR-1750DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45466

9 years agobcm53xx: add USB LED for Buffalo WZR-1750DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:42 +0000 (20:09 +0000)]
bcm53xx: add USB LED for Buffalo WZR-1750DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45465

9 years agobcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
Felix Fietkau [Thu, 16 Apr 2015 20:09:36 +0000 (20:09 +0000)]
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45464

9 years agobase-files: reorder led trigger/brightness writes
Felix Fietkau [Thu, 16 Apr 2015 20:09:30 +0000 (20:09 +0000)]
base-files: reorder led trigger/brightness writes

Depending on configuration, disable the LED before writing the trigger
and enable it after writing it. Fixes LEDs where the value defaults to 1

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45463

9 years agobase-files: add generic preinit script to extract board/model info from device-tree
Felix Fietkau [Thu, 16 Apr 2015 20:09:21 +0000 (20:09 +0000)]
base-files: add generic preinit script to extract board/model info from device-tree

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45462

9 years agobcm53xx: increate trx maxlen to prevent build failures with bigger images
Felix Fietkau [Thu, 16 Apr 2015 20:09:15 +0000 (20:09 +0000)]
bcm53xx: increate trx maxlen to prevent build failures with bigger images

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45461

9 years agobcm53xx: fix WXR-1900DHP power led name and add usb led
Felix Fietkau [Thu, 16 Apr 2015 20:09:08 +0000 (20:09 +0000)]
bcm53xx: fix WXR-1900DHP power led name and add usb led

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45460

9 years agomvebu: better integrate xp-gp
Luka Perkov [Thu, 16 Apr 2015 13:53:57 +0000 (13:53 +0000)]
mvebu: better integrate xp-gp

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45459

9 years agobcm53xx: make use of the new board detection layer
Felix Fietkau [Thu, 16 Apr 2015 12:18:34 +0000 (12:18 +0000)]
bcm53xx: make use of the new board detection layer

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45458

9 years agobuild: tell users to do non-paralle builds on errors
Felix Fietkau [Thu, 16 Apr 2015 12:18:26 +0000 (12:18 +0000)]
build: tell users to do non-paralle builds on errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45457

9 years agomvebu: add support for the Linksys Caiman and Cobra
Imre Kaloz [Thu, 16 Apr 2015 09:54:39 +0000 (09:54 +0000)]
mvebu: add support for the Linksys Caiman and Cobra

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45456

9 years agomvebu: bring back CONFIG_CPU_THERMAL
Luka Perkov [Thu, 16 Apr 2015 00:23:34 +0000 (00:23 +0000)]
mvebu: bring back CONFIG_CPU_THERMAL

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45455

9 years agomvebu: refresh kernel config
Luka Perkov [Thu, 16 Apr 2015 00:10:42 +0000 (00:10 +0000)]
mvebu: refresh kernel config

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45454

9 years agomvebu: fix typo in marvell profile
Luka Perkov [Wed, 15 Apr 2015 16:23:20 +0000 (16:23 +0000)]
mvebu: fix typo in marvell profile

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45453

9 years agomvebu: better integrate 385-ap-db
Luka Perkov [Wed, 15 Apr 2015 16:23:10 +0000 (16:23 +0000)]
mvebu: better integrate 385-ap-db

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45452

9 years agobcm53xx: add USB 2.0 power control for WXR-1900DHP
Felix Fietkau [Wed, 15 Apr 2015 16:06:20 +0000 (16:06 +0000)]
bcm53xx: add USB 2.0 power control for WXR-1900DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45451

9 years agobcm53xx: add USB 2.0 support
Felix Fietkau [Wed, 15 Apr 2015 16:06:14 +0000 (16:06 +0000)]
bcm53xx: add USB 2.0 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45450

9 years agoodhcp6c: silence "bad number" warnings
Steven Barth [Wed, 15 Apr 2015 14:04:17 +0000 (14:04 +0000)]
odhcp6c: silence "bad number" warnings

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45449

9 years agoodhcp6c: avoid saving empty RA search domains
Steven Barth [Wed, 15 Apr 2015 12:57:41 +0000 (12:57 +0000)]
odhcp6c: avoid saving empty RA search domains

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45448

9 years agoopkg: fix md5 related #ifdef (thx, swalker)
Felix Fietkau [Tue, 14 Apr 2015 22:10:40 +0000 (22:10 +0000)]
opkg: fix md5 related #ifdef (thx, swalker)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45447

9 years agouclient: update to the latest version, fixes a crash in processing redirect/disconnec...
Felix Fietkau [Tue, 14 Apr 2015 21:05:45 +0000 (21:05 +0000)]
uclient: update to the latest version, fixes a crash in processing redirect/disconnect after headers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45446

9 years agobcm53xx: add (disabled) support for upgrading kernel during sysupgrade
Rafał Miłecki [Tue, 14 Apr 2015 20:50:59 +0000 (20:50 +0000)]
bcm53xx: add (disabled) support for upgrading kernel during sysupgrade

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45445

9 years agootrx: support for creating simple TRX files
Rafał Miłecki [Tue, 14 Apr 2015 20:50:53 +0000 (20:50 +0000)]
otrx: support for creating simple TRX files

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45444

9 years agootrx: change command line API to start with a mode
Rafał Miłecki [Tue, 14 Apr 2015 20:50:46 +0000 (20:50 +0000)]
otrx: change command line API to start with a mode

This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45443

9 years agorpcd: update to latest git HEAD
John Crispin [Tue, 14 Apr 2015 19:01:29 +0000 (19:01 +0000)]
rpcd: update to latest git HEAD

adds support for reading md5 sums of files

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45442

9 years agoustream-ssl: update to latest git HEAD
John Crispin [Tue, 14 Apr 2015 19:01:24 +0000 (19:01 +0000)]
ustream-ssl: update to latest git HEAD

fixes long writes when using polarssl

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45441

9 years agofstools: update to latest git HEAD
John Crispin [Tue, 14 Apr 2015 19:01:09 +0000 (19:01 +0000)]
fstools: update to latest git HEAD

fixes issues with semi-initialized overlay partitions during firstboot

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45440

9 years agoar71xx: Enable AT803X_PHY to set special flags
John Crispin [Tue, 14 Apr 2015 19:00:57 +0000 (19:00 +0000)]
ar71xx: Enable AT803X_PHY to set special flags

Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45439

9 years agoar71xx: fix ethernet packet loss issues on OM5P-AN
John Crispin [Tue, 14 Apr 2015 19:00:51 +0000 (19:00 +0000)]
ar71xx: fix ethernet packet loss issues on OM5P-AN

The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.

The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45438

9 years agoopkg: drop md5 in favour of sha256
John Crispin [Tue, 14 Apr 2015 19:00:14 +0000 (19:00 +0000)]
opkg: drop md5 in favour of sha256

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45437

9 years agootrx: use %zd to fix printf format warnings
Rafał Miłecki [Tue, 14 Apr 2015 16:16:11 +0000 (16:16 +0000)]
otrx: use %zd to fix printf format warnings

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45436

9 years agoodhcpd: fix accidental logic inversion
Steven Barth [Tue, 14 Apr 2015 14:21:52 +0000 (14:21 +0000)]
odhcpd: fix accidental logic inversion

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45435

9 years agobuild: replace the deprecated find argument -perm +0100 with /0100 (#19480)
Felix Fietkau [Tue, 14 Apr 2015 12:49:30 +0000 (12:49 +0000)]
build: replace the deprecated find argument -perm +0100 with /0100 (#19480)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45434

9 years agootrx: check TRX length read from header to avoid Segmentation fault
Rafał Miłecki [Tue, 14 Apr 2015 12:18:57 +0000 (12:18 +0000)]
otrx: check TRX length read from header to avoid Segmentation fault

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45433

9 years agomac80211: merge a number of upstream driver fixes/improvements
Felix Fietkau [Tue, 14 Apr 2015 12:17:34 +0000 (12:17 +0000)]
mac80211: merge a number of upstream driver fixes/improvements

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45432

9 years agokernel: update bgmac patches to the latest version submitted
Felix Fietkau [Tue, 14 Apr 2015 12:17:20 +0000 (12:17 +0000)]
kernel: update bgmac patches to the latest version submitted

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45431

9 years agootrx: include byteswap.h to fix compilation with musl
Rafał Miłecki [Tue, 14 Apr 2015 11:10:14 +0000 (11:10 +0000)]
otrx: include byteswap.h to fix compilation with musl

Fixes #19470

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45430

9 years agoodhcp6c: fix some issue discovered by scan-build
Steven Barth [Tue, 14 Apr 2015 08:33:37 +0000 (08:33 +0000)]
odhcp6c: fix some issue discovered by scan-build

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45429

9 years agoodhcpd: avoid illegal memory access in some corner cases
Steven Barth [Tue, 14 Apr 2015 08:31:53 +0000 (08:31 +0000)]
odhcpd: avoid illegal memory access in some corner cases

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45428

9 years agobuild: set CCACHE_DIR for host builds
Felix Fietkau [Tue, 14 Apr 2015 00:00:55 +0000 (00:00 +0000)]
build: set CCACHE_DIR for host builds

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45427

9 years agobcm53xx: refresh kernel patches
Felix Fietkau [Mon, 13 Apr 2015 22:23:37 +0000 (22:23 +0000)]
bcm53xx: refresh kernel patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426

9 years agoqos-scripts: remove layer7 support
Felix Fietkau [Mon, 13 Apr 2015 22:23:26 +0000 (22:23 +0000)]
qos-scripts: remove layer7 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45425

9 years agoiptables: remove layer7 support
Felix Fietkau [Mon, 13 Apr 2015 22:23:19 +0000 (22:23 +0000)]
iptables: remove layer7 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45424

9 years agokernel: finally remove layer7 filter support
Felix Fietkau [Mon, 13 Apr 2015 22:23:14 +0000 (22:23 +0000)]
kernel: finally remove layer7 filter support

it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423

9 years agokernel: fix more bgmac dma init/cleanup issues
Felix Fietkau [Mon, 13 Apr 2015 20:08:30 +0000 (20:08 +0000)]
kernel: fix more bgmac dma init/cleanup issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45422

9 years agomvebu: copy the initramfs files to the bin dir
Imre Kaloz [Mon, 13 Apr 2015 20:06:47 +0000 (20:06 +0000)]
mvebu: copy the initramfs files to the bin dir

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45421

9 years agokernel: sync bgmac changes with latest upstream submission
Felix Fietkau [Mon, 13 Apr 2015 17:32:33 +0000 (17:32 +0000)]
kernel: sync bgmac changes with latest upstream submission

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45420

9 years agobcm53xx: add support for the Buffalo WXR-1900DHP
Felix Fietkau [Mon, 13 Apr 2015 17:32:25 +0000 (17:32 +0000)]
bcm53xx: add support for the Buffalo WXR-1900DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419

9 years agobcm53xx: fix GPIO pins > 16
Felix Fietkau [Mon, 13 Apr 2015 17:32:18 +0000 (17:32 +0000)]
bcm53xx: fix GPIO pins > 16

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418

9 years agokernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)
Felix Fietkau [Mon, 13 Apr 2015 17:32:12 +0000 (17:32 +0000)]
kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45417

9 years agobcm53xx: add missing l2 cache controller AUXCTL bit
Felix Fietkau [Mon, 13 Apr 2015 17:32:05 +0000 (17:32 +0000)]
bcm53xx: add missing l2 cache controller AUXCTL bit

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416

9 years agomvebu: add support for the in-CPU RTC on the Armada 38x
Imre Kaloz [Mon, 13 Apr 2015 13:06:34 +0000 (13:06 +0000)]
mvebu: add support for the in-CPU RTC on the Armada 38x

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45415

9 years agomvebu: add comments to image generation
Imre Kaloz [Mon, 13 Apr 2015 12:15:40 +0000 (12:15 +0000)]
mvebu: add comments to image generation

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45414

9 years agomvebu: stop legacy image generation
Imre Kaloz [Mon, 13 Apr 2015 12:08:42 +0000 (12:08 +0000)]
mvebu: stop legacy image generation

If you can't find the firmware for you board, send proper patches.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45413