mediatek: 6.6: drop backport patches

[openwrt/staging/981213.git] / target / linux / mediatek / patches-6.6 / 019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch

diff --git a/target/linux/mediatek/patches-6.6/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch b/target/linux/mediatek/patches-6.6/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch
deleted file mode 100644 (file)
index 9cc6cad..0000000
--- a/target/linux/mediatek/patches-6.6/019-v6.5-arm64-dts-mt7986-increase-bl2-partition-on-NAND-of-B.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 6dd3b939370094eb79529683be84500f3c757404 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 6 Jun 2023 16:43:20 +0100
-Subject: [PATCH 19/19] arm64: dts: mt7986: increase bl2 partition on NAND of
- Bananapi R3
-
-The bootrom burned into the MT7986 SoC will try multiple locations on
-the SPI-NAND flash to load bl2 in case the bl2 image located at the the
-previously attempted offset is corrupt.
-
-Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND,
-allowing for up to four redundant copies of bl2 (typically sized a
-bit less than 0x40000).
-
-Fixes: 8e01fb15b8157 ("arm64: dts: mt7986: add Bananapi R3")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/ZH9UGF99RgzrHZ88@makrotopia.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso     | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-@@ -29,13 +29,13 @@
- 
-                                       partition@0 {
-                                               label = "bl2";
--                                              reg = <0x0 0x80000>;
-+                                              reg = <0x0 0x100000>;
-                                               read-only;
-                                       };
- 
--                                      partition@80000 {
-+                                      partition@100000 {
-                                               label = "reserved";
--                                              reg = <0x80000 0x300000>;
-+                                              reg = <0x100000 0x280000>;
-                                       };
- 
-                                       partition@380000 {