ramips: switch to 6.1 kernel

[openwrt/staging/981213.git] / target / linux / ramips / patches-5.15 / 010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch

diff --git a/target/linux/ramips/patches-5.15/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch b/target/linux/ramips/patches-5.15/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch
deleted file mode 100644 (file)
index 5898a11..0000000
--- a/target/linux/ramips/patches-5.15/010-v6.5-02-mips-pci-mt7620-use-dev_info-to-log-PCIe-device-dete.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 89ec9bbe60b61cc6ae3eddd6d4f43e128f8a88de Mon Sep 17 00:00:00 2001
-From: Shiji Yang <yangshiji66@outlook.com>
-Date: Tue, 20 Jun 2023 18:43:23 +0800
-Subject: [PATCH 2/2] mips: pci-mt7620: use dev_info() to log PCIe device
- detection result
-
-Usually, We only need to print the error log when there is a PCIe card but
-initialization fails. Whether the driver finds the PCIe card or not is the
-expected behavior. So it's better to log these information with dev_info().
-
-Tested on MT7628AN router Motorola MWR03.
-
-Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
-Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
-Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
----
- arch/mips/pci/pci-mt7620.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/pci/pci-mt7620.c
-+++ b/arch/mips/pci/pci-mt7620.c
-@@ -331,7 +331,7 @@ static int mt7620_pci_probe(struct platf
-               rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
-               if (ralink_soc == MT762X_SOC_MT7620A)
-                       rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV);
--              dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
-+              dev_info(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n");
-               return -1;
-       }
- 
-@@ -374,7 +374,7 @@ int pcibios_map_irq(const struct pci_dev
-                       dev->bus->number, slot);
-               return 0;
-       }
--      dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
-+      dev_info(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n",
-               dev->bus->number, slot, irq);
- 
-       /* configure the cache line size to 0x14 */