+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/* Copyright (c) 2017-2020, Sven Eckelmann <sven@narfation.org>
- * Copyright (c) 2018, Marek Lindner <marek.lindner@kaiwoo.ai>
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Plasma Cloud PA2200";
- compatible = "plasmacloud,pa2200";
-
- soc {
- rng@22000 {
- status = "okay";
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
-
- crypto@8e3a000 {
- status = "okay";
- };
-
- watchdog@b017000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART >;
- };
- };
-
- aliases {
- led-boot = &led_power_orange;
- led-failsafe = &led_status_blue;
- led-running = &led_power_orange;
- led-upgrade = &led_status_blue;
- label-mac-device = &swport4;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power_orange: power_orange {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_ORANGE>;
- gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
- };
-
- 2g_blue {
- label = "blue:2g";
- gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- 2g_green {
- label = "green:5g1";
- gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- 5g2_green {
- label = "green:5g2";
- gpios = <&tlmm 48 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy2tpt";
- };
-
- led_status_blue: status_blue {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio16", "gpio17";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio13", "gpio14", "gpio15";
- drive-strength = <12>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio12";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- status = "okay";
- cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- /* partitions are passed via bootloader */
- partitions {
- partition-art {
- label = "0:ART";
-
- nvmem-layout {
- compatible = "fixed-layout";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_gmac0: macaddr@0 {
- reg = <0x0 0x6>;
- };
-
- macaddr_gmac1: macaddr@6 {
- reg = <0x6 0x6>;
- };
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
-
- precal_art_9000: precal@9000 {
- reg = <0x9000 0x2f20>;
- };
- };
- };
- };
- };
-};
-
-&blsp1_uart1 {
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
- perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
- wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi2: wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
- ieee80211-freq-limit = <5170000 5350000>;
-
- nvmem-cell-names = "pre-calibration";
- nvmem-cells = <&precal_art_9000>;
- };
- };
-};
-
-&mdio {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&swport4 {
- status = "okay";
- label = "ethernet1";
-
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_gmac0>;
-};
-
-&swport5 {
- status = "okay";
- label = "ethernet2";
-
- nvmem-cell-names = "mac-address";
- nvmem-cells = <&macaddr_gmac1>;
-};
-
-&wifi0 {
- status = "okay";
- qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
-
- nvmem-cell-names = "pre-calibration";
- nvmem-cells = <&precal_art_1000>;
-};
-
-&wifi1 {
- status = "okay";
- qcom,ath10k-calibration-variant = "PlasmaCloud-PA2200";
- ieee80211-freq-limit = <5470000 5875000>;
-
- nvmem-cell-names = "pre-calibration";
- nvmem-cells = <&precal_art_5000>;
-};
projects / openwrt / staging / blocktrron.git / blobdiff