+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8065-smb208.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Nokia AC400i";
- compatible = "nokia,ac400i", "qcom,ipq8065", "qcom,ipq8064";
-
- aliases {
- mdio-gpio0 = &mdio0;
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
-
- led-boot = &pwr_red;
- led-failsafe = &pwr_red;
- led-running = &pwr_green;
- led-upgrade = &pwr_green;
- };
-
- chosen {
- bootargs-override = " console=ttyMSM0,115200n8 ubi.mtd=ubi root=/dev/ubiblock0_2";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- 5g_red {
- label = "red:5g";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
- };
-
- 5g_green {
- label = "green:5g";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
-
- 2g_red {
- label = "red:2g";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
-
- 2g_green {
- label = "green:2g";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
- };
-
- eth1_red {
- label = "red:eth1";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_HIGH>;
- };
-
- eth1_green {
- label = "green:eth1";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
- };
-
- eth2_red {
- label = "red:eth2";
- gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>;
- };
-
- eth2_green {
- label = "green:eth2";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
- };
-
- ctrl_red {
- label = "red:ctrl";
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
- };
-
- ctrl_green {
- label = "green:ctrl";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
- };
-
- pwr_red: pwr_red {
- label = "red:pwr";
- gpios = <&qcom_pinmux 2 GPIO_ACTIVE_LOW>;
- };
-
- pwr_green: pwr_green {
- label = "green:pwr";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&qcom_pinmux {
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19";
- function = "gsbi5";
- drive-strength = <10>;
- bias-pull-down;
- };
-
- clk {
- pins = "gpio21";
- function = "gsbi5";
- drive-strength = <12>;
- bias-pull-down;
- };
-
- cs {
- pins = "gpio20";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio65", "gpio64",
- "gpio53", "gpio54",
- "gpio68", "gpio22",
- "gpio67", "gpio23",
- "gpio55", "gpio56",
- "gpio2", "gpio26";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio15";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi4: spi@1a280000 {
- status = "okay";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "qcom,smem-part";
- };
- };
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "Nokia-AC400i";
- };
- };
-};
-
-&pcie1 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- qcom,ath10k-calibration-variant = "Nokia-AC400i";
- };
- };
-};
-
-&mdio0 {
- status = "okay";
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-
-};
-
-//POE
-&gmac0 {
- status = "okay";
- qcom,id = <0>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mdiobus = <&mdio0>;
- phy-handle = <&phy0>;
- phy-mode = "rgmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-//LAN1
-&gmac1 {
- status = "okay";
- qcom,id = <1>;
-
- mdiobus = <&mdio0>;
- phy-handle = <&phy1>;
- phy-mode = "rgmii";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&nand {
- status = "okay";
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- rootfs@0 {
- label = "rootfs";
- reg = <0x0000000 0x4000000>;
- };
-
- rootfs_1@4000000 {
- label = "rootfs_1";
- reg = <0x4000000 0x4000000>;
- };
-
- cfg@8000000 {
- label = "cfg";
- reg = <0x8000000 0x8000000>;
- };
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
projects / openwrt / staging / blocktrron.git / blobdiff