+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Extreme Networks AP3935";
- compatible = "extreme,ap3935", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x41400000 0x3ec00000>;
- device_type = "memory";
- };
-
- aliases {
- serial0 = &gsbi7_serial;
- serial1 = &gsbi2_serial;
- mdio-gpio0 = &mdio0;
- ethernet0 = &gmac0;
- ethernet1 = &gmac2;
-
- led-boot = &led_power_green;
- led-failsafe = &led_power_orange;
- led-running = &led_power_green;
- led-upgrade = &led_power_green;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs-override = "ubi.block=0,0 root=/dev/ubiblock0_0";
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- led_power_green: power_green {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>;
- };
-
- led_power_orange: power_orange {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_ORANGE>;
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>;
- };
-
- led_wlan2g_green {
- label = "green:wlan2g";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- led_wlan5g_green {
- label = "green:wlan5g";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- led_lan1_green {
- label = "green:lan1";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- led_lan1_orange {
- label = "orange:lan1";
- gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>;
- };
-
- led_lan2_green {
- label = "green:lan2";
- gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>;
- };
-
- led_lan2_orange {
- label = "orange:lan2";
- gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-
-&qcom_pinmux {
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19";
- function = "gsbi5";
- drive-strength = <10>;
- bias-pull-down;
- };
-
- clk {
- pins = "gpio21";
- function = "gsbi5";
- drive-strength = <12>;
- bias-pull-down;
- };
-
- cs {
- pins = "gpio20";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio22", "gpio23", "gpio24", "gpio25",
- "gpio26", "gpio27", "gpio28", "gpio29";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio56";
- function = "gpio";
- bias-pull-up;
- };
- };
-};
-
-&gsbi2 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- gsbi2_serial: serial@12490000 {
- status = "okay";
- };
-};
-
-&gsbi4 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- serial@16340000 {
- status = "disabled";
- };
-};
-
-&gsbi7 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "okay";
-
- gsbi7_serial: serial@16640000 {
- status = "okay";
- };
-};
-
-&gsbi5 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "okay";
-
- spi4: spi@1a280000 {
- status = "okay";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cfg1@2a0000 {
- compatible = "u-boot,env-redundant-bool";
- label = "CFG1";
- reg = <0x2a0000 0x0010000>;
-
- ethaddr: ethaddr {
- #nvmem-cell-cells = <1>;
- };
- };
-
- bootpri@2b0000 {
- label = "BootPRI";
- reg = <0x2b0000 0x0080000>;
- };
-
- cfg2@330000 {
- label = "CFG2";
- reg = <0x330000 0x0010000>;
- };
-
- fs@340000 {
- label = "FS";
- reg = <0x340000 0x0080000>;
- };
-
- priimg@3c0000 {
- label = "PriImg";
- reg = <0x3c0000 0x0e10000>;
- };
-
- secimg@11d0000 {
- label = "SecImg";
- reg = <0x11d0000 0x0e10000>;
- };
- };
- };
- };
-};
-
-&pcie0 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-&pcie1 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
-
- bridge@0,0 {
- reg = <0x00000000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
-
- wifi@1,0 {
- compatible = "qcom,ath10k";
- status = "okay";
- reg = <0x00010000 0 0 0 0>;
- };
- };
-};
-
-&nand {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- nand@0 {
- compatible = "qcom,nandcs";
-
- reg = <0>;
-
- nand-ecc-strength = <8>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- ubi@0 {
- label = "ubi";
- reg = <0x0000000 0x20000000>;
- };
- };
- };
-};
-
-&soc {
- mdio1: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- status = "okay";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
-
- phy2: ethernet-phy@2 {
- reg = <2>;
- };
- };
-};
-
-&gmac0 {
- status = "okay";
-
- qcom,id = <0>;
- mdiobus = <&mdio1>;
-
- phy-mode = "rgmii";
- phy-handle = <&phy1>;
-
- nvmem-cells = <ðaddr 0>;
- nvmem-cell-names = "mac-address";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- qcom,id = <2>;
- mdiobus = <&mdio1>;
-
- phy-mode = "sgmii";
- phy-handle = <&phy2>;
-
- nvmem-cells = <ðaddr 1>;
- nvmem-cell-names = "mac-address";
-};
-
-&adm_dma {
- status = "okay";
-};
projects / openwrt / staging / blocktrron.git / blobdiff