uboot-mvebu: update to version v2022.04

[openwrt/staging/chunkeey.git] / package / boot / uboot-mvebu / patches / 011-ddr-marvell-a38x-fix-synchronous-asynchronous-mode.patch

diff --git a/package/boot/uboot-mvebu/patches/011-ddr-marvell-a38x-fix-synchronous-asynchronous-mode.patch b/package/boot/uboot-mvebu/patches/011-ddr-marvell-a38x-fix-synchronous-asynchronous-mode.patch
deleted file mode 100644 (file)
index 9da1459..0000000
--- a/package/boot/uboot-mvebu/patches/011-ddr-marvell-a38x-fix-synchronous-asynchronous-mode.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From eadc4f512fb43bba2fa4e842c982da919da664be Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
-Date: Tue, 4 Jan 2022 15:57:49 +0100
-Subject: [PATCH] ddr: marvell: a38x: Fix Synchronous vs Asynchronous mode
- determination
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Before commit 4c289425752f ("mv_ddr: a38x: add support for ddr async
-mode"), Asynchornous Mode was only used when the CPU Subsystem Clock
-Options[4:0] field in the SAR1 register was set to value 0x13: CPU at
-2 GHz and DDR at 933 MHz.
-
-Then commit 4c289425752f ("mv_ddr: a38x: add support for ddr async
-mode") added support for Asynchornous Modes with frequencies other than
-933 MHz (but at least 467 MHz), but the code it added to check for
-whether Asynchornous Mode should be used is wrong: it checks whether the
-frequency setting in board DDR topology map is set to value other than
-MV_DDR_FREQ_SAR.
-
-Thus boards which define a specific value, greater than 400 MHz, for DDR
-frequency in their board topology (e.g. Turris Omnia defines
-MV_DDR_FREQ_800), are incorrectly put into Asynchornous Mode after that
-commit.
-
-The A38x Functional Specification, section 10.12 DRAM Clocking, says:
-  In Synchornous mode, the DRAM and CPU clocks are edge aligned and run
-  in 1:2 or 1:3 CPU to DRAM frequency ratios.
-
-Change the check for whether Asynchornous Mode should be used according
-to this explanation in Functional Specification.
-
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
-Tested-by: Chris Packham <judge.packham@gmail.com>
-Reviewed-by: Stefan Roese <sr@denx.de>
----
- drivers/ddr/marvell/a38x/mv_ddr_plat.c | 19 ++++++++-----------
- 1 file changed, 8 insertions(+), 11 deletions(-)
-
---- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c
-+++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
-@@ -167,8 +167,6 @@ static u16 a38x_vco_freq_per_sar_ref_clk
- };
- 
- 
--static u32 async_mode_at_tf;
--
- static u32 dq_bit_map_2_phy_pin[] = {
-       1, 0, 2, 6, 9, 8, 3, 7, /* 0 */
-       8, 9, 1, 7, 2, 6, 3, 0, /* 1 */
-@@ -734,7 +732,8 @@ static int ddr3_tip_a38x_set_divider(u8
-       u32 divider = 0;
-       u32 sar_val, ref_clk_satr;
-       u32 async_val;
--      u32 freq = mv_ddr_freq_get(frequency);
-+      u32 cpu_freq;
-+      u32 ddr_freq = mv_ddr_freq_get(frequency);
- 
-       if (if_id != 0) {
-               DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR,
-@@ -751,11 +750,14 @@ static int ddr3_tip_a38x_set_divider(u8
-       ref_clk_satr = reg_read(DEVICE_SAMPLE_AT_RESET2_REG);
-       if (((ref_clk_satr >> DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_OFFSET) & 0x1) ==
-           DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_25MHZ)
--              divider = a38x_vco_freq_per_sar_ref_clk_25_mhz[sar_val] / freq;
-+              cpu_freq = a38x_vco_freq_per_sar_ref_clk_25_mhz[sar_val];
-       else
--              divider = a38x_vco_freq_per_sar_ref_clk_40_mhz[sar_val] / freq;
-+              cpu_freq = a38x_vco_freq_per_sar_ref_clk_40_mhz[sar_val];
-+
-+      divider = cpu_freq / ddr_freq;
- 
--      if ((async_mode_at_tf == 1) && (freq > 400)) {
-+      if (((cpu_freq % ddr_freq != 0) || (divider != 2 && divider != 3)) &&
-+          (ddr_freq > 400)) {
-               /* Set async mode */
-               dunit_write(0x20220, 0x1000, 0x1000);
-               dunit_write(0xe42f4, 0x200, 0x200);
-@@ -869,8 +871,6 @@ int ddr3_tip_ext_write(u32 dev_num, u32
- 
- int mv_ddr_early_init(void)
- {
--      struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
--
-       /* FIXME: change this configuration per ddr type
-        * configure a380 and a390 to work with receiver odt timing
-        * the odt_config is defined:
-@@ -882,9 +882,6 @@ int mv_ddr_early_init(void)
- 
-       mv_ddr_sw_db_init(0, 0);
- 
--      if (tm->interface_params[0].memory_freq != MV_DDR_FREQ_SAR)
--              async_mode_at_tf = 1;
--
-       return MV_OK;
- }
-