+++ /dev/null
-wpa_supplicant_setup_vif() {
- local vif="$1"
- local driver="$2"
- local key="$key"
- local options="$3"
- local freq=""
- local ht="$5"
- local ap_scan=""
- local scan_ssid="1"
- [ -n "$4" ] && freq="frequency=$4"
-
- # make sure we have the encryption type and the psk
- [ -n "$enc" ] || {
- config_get enc "$vif" encryption
- }
- [ -n "$key" ] || {
- config_get key "$vif" key
- }
-
- local net_cfg bridge
- config_get bridge "$vif" bridge
- [ -z "$bridge" ] && {
- net_cfg="$(find_net_config "$vif")"
- [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
- config_set "$vif" bridge "$bridge"
- }
-
- local mode ifname wds modestr=""
- config_get mode "$vif" mode
- config_get ifname "$vif" ifname
- config_get_bool wds "$vif" wds 0
- [ -z "$bridge" ] || [ "$mode" = ap ] || [ "$mode" = sta -a $wds -eq 1 ] || {
- echo "wpa_supplicant_setup_vif($ifname): Refusing to bridge $mode mode interface"
- return 1
- }
- [ "$mode" = "adhoc" ] && {
- modestr="mode=1"
- scan_ssid="0"
- ap_scan="ap_scan=2"
- }
-
- key_mgmt='NONE'
- case "$enc" in
- *none*) ;;
- *wep*)
- config_get key "$vif" key
- key="${key:-1}"
- case "$key" in
- [1234])
- for idx in 1 2 3 4; do
- local zidx
- zidx=$(($idx - 1))
- config_get ckey "$vif" "key${idx}"
- [ -n "$ckey" ] && \
- append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
- done
- wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
- ;;
- *)
- wep_key0="wep_key0=$(prepare_key_wep "$key")"
- wep_tx_keyidx="wep_tx_keyidx=0"
- ;;
- esac
- ;;
- *psk*)
- key_mgmt='WPA-PSK'
- # if you want to use PSK with a non-nl80211 driver you
- # have to use WPA-NONE and wext driver for wpa_s
- [ "$mode" = "adhoc" -a "$driver" != "nl80211" ] && {
- key_mgmt='WPA-NONE'
- driver='wext'
- }
- if [ ${#key} -eq 64 ]; then
- passphrase="psk=${key}"
- else
- passphrase="psk=\"${key}\""
- fi
- case "$enc" in
- *psk2*)
- proto='proto=RSN'
- config_get ieee80211w "$vif" ieee80211w
- ;;
- *psk*)
- proto='proto=WPA'
- ;;
- esac
- ;;
- *wpa*|*8021x*)
- proto='proto=WPA2'
- key_mgmt='WPA-EAP'
- config_get ieee80211w "$vif" ieee80211w
- config_get ca_cert "$vif" ca_cert
- config_get eap_type "$vif" eap_type
- ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
- case "$eap_type" in
- tls)
- pairwise='pairwise=CCMP'
- group='group=CCMP'
- config_get identity "$vif" identity
- config_get client_cert "$vif" client_cert
- config_get priv_key "$vif" priv_key
- config_get priv_key_pwd "$vif" priv_key_pwd
- identity="identity=\"$identity\""
- client_cert="client_cert=\"$client_cert\""
- priv_key="private_key=\"$priv_key\""
- priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
- ;;
- peap|ttls)
- config_get auth "$vif" auth
- config_get identity "$vif" identity
- config_get password "$vif" password
- phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
- identity="identity=\"$identity\""
- password="password=\"$password\""
- ;;
- esac
- eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
- ;;
- esac
-
- case "$ieee80211w" in
- [012])
- ieee80211w="ieee80211w=$ieee80211w"
- ;;
- esac
-
- local fixed_freq bssid1 beacon_interval brates mrate
- config_get ifname "$vif" ifname
- config_get bridge "$vif" bridge
- config_get ssid "$vif" ssid
- config_get bssid "$vif" bssid
- bssid1=${bssid:+"bssid=$bssid"}
- beacon_interval=${beacon_int:+"beacon_interval=$beacon_int"}
-
- local br brval brsub brstr
- [ -n "$basic_rate_list" ] && {
- for br in $basic_rate_list; do
- brval="$(($br / 1000))"
- brsub="$((($br / 100) % 10))"
- [ "$brsub" -gt 0 ] && brval="$brval.$brsub"
- [ -n "$brstr" ] && brstr="$brstr,"
- brstr="$brstr$brval"
- done
- brates=${basic_rate_list:+"rates=$brstr"}
- }
-
- local mcval=""
- [ -n "$mcast_rate" ] && {
- mcval="$(($mcast_rate / 1000))"
- mcsub="$(( ($mcast_rate / 100) % 10 ))"
- [ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
- mrate=${mcast_rate:+"mcast_rate=$mcval"}
- }
-
- local ht_str
- [ -n "$ht" ] && ht_str="htmode=$ht"
-
- rm -rf /var/run/wpa_supplicant-$ifname
- cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
-ctrl_interface=/var/run/wpa_supplicant-$ifname
-$ap_scan
-network={
- $modestr
- scan_ssid=$scan_ssid
- ssid="$ssid"
- $bssid1
- key_mgmt=$key_mgmt
- $proto
- $freq
- ${fixed:+"fixed_freq=1"}
- $beacon_interval
- $brates
- $mrate
- $ht_str
- $ieee80211w
- $passphrase
- $pairwise
- $group
- $eap_type
- $ca_cert
- $client_cert
- $priv_key
- $priv_key_pwd
- $phase2
- $identity
- $password
- $wep_key0
- $wep_key1
- $wep_key2
- $wep_key3
- $wep_tx_keyidx
-}
-EOF
- if [ -n "$proto" -o "$key_mgmt" == "NONE" ]; then
- wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf $options
- else
- return 0
- fi
-}
projects / openwrt / staging / chunkeey.git / blobdiff