+++ /dev/null
---- a/ath/if_ath.c
-+++ b/ath/if_ath.c
-@@ -606,6 +606,14 @@ ath_attach(u_int16_t devid, struct net_d
- }
- sc->sc_ah = ah;
-
-+ /* WAR for AR7100 PCI bug */
-+#if defined(CONFIG_ATHEROS_AR71XX) || defined(CONFIG_ATH79)
-+ if ((ar_device(sc->devid) >= 5210) && (ar_device(sc->devid) < 5416)) {
-+ ath_hal_setcapability(ah, HAL_CAP_DMABURST_RX, 0, HAL_DMABURST_4B, NULL);
-+ ath_hal_setcapability(ah, HAL_CAP_DMABURST_TX, 0, HAL_DMABURST_4B, NULL);
-+ }
-+#endif
-+
- /*
- * Check if the MAC has multi-rate retry support.
- * We do this by trying to setup a fake extended
-@@ -7568,7 +7576,7 @@ ath_txq_setup(struct ath_softc *sc, int
- if (qtype == HAL_TX_QUEUE_UAPSD)
- qi.tqi_qflags = HAL_TXQ_TXDESCINT_ENABLE;
- else
-- qi.tqi_qflags = HAL_TXQ_TXEOLINT_ENABLE |
-+ qi.tqi_qflags = HAL_TXQ_TXEOLINT_ENABLE | HAL_TXQ_TXOKINT_ENABLE |
- HAL_TXQ_TXDESCINT_ENABLE;
- qnum = ath_hal_setuptxqueue(ah, qtype, &qi);
- if (qnum == -1) {
---- a/ath_hal/ah_os.c
-+++ b/ath_hal/ah_os.c
-@@ -126,6 +126,13 @@ ath_hal_printf(struct ath_hal *ah, const
- }
- EXPORT_SYMBOL(ath_hal_printf);
-
-+void __ahdecl
-+ath_hal_printstr(struct ath_hal *ah, const char *str)
-+{
-+ printk("%s", str);
-+}
-+EXPORT_SYMBOL(ath_hal_printstr);
-+
- /*
- * Format an Ethernet MAC for printing.
- */
---- a/ath_hal/ah_os.h
-+++ b/ath_hal/ah_os.h
-@@ -156,69 +156,23 @@ extern u_int32_t __ahdecl ath_hal_getupt
- #endif
- #endif /* AH_BYTE_ORDER */
-
--/*
-- * Some big-endian architectures don't set CONFIG_GENERIC_IOMAP, but fail to
-- * implement iowrite32be and ioread32be. Provide compatibility macros when
-- * it's needed.
-- *
-- * As of Linux 2.6.24, only MIPS, PARISC and PowerPC implement iowrite32be and
-- * ioread32be as functions.
-- *
-- * The downside or the replacement macros it that we may be byte-swapping data
-- * for the second time, so the native implementations should be preferred.
-- */
--#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12)) && \
-- !defined(CONFIG_GENERIC_IOMAP) && (AH_BYTE_ORDER == AH_BIG_ENDIAN) && \
-- !defined(__mips__) && !defined(__hppa__) && !defined(__powerpc__)
--# ifndef iowrite32be
--# define iowrite32be(_val, _addr) iowrite32(swab32((_val)), (_addr))
--# endif
--# ifndef ioread32be
--# define ioread32be(_addr) swab32(ioread32((_addr)))
--# endif
--#endif
-+#define IS_SWAPPED(_ah, _reg) \
-+ ((_ah)->ah_swapped && \
-+ (((0x4000 <= (_reg)) && ((_reg) < 0x5000)) || \
-+ ((0x7000 <= (_reg)) && ((_reg) < 0x8000))))
-+
-+#define SWAPREG(_ah, _reg, _val) \
-+ (IS_SWAPPED(_ah, _reg) ? cpu_to_le32(_val) : (_val))
-
- /*
- * The register accesses are done using target-specific functions when
- * debugging is enabled (AH_DEBUG) or it's explicitly requested for the target.
-- *
-- * The hardware registers use little-endian byte order natively. Big-endian
-- * systems are configured by HAL to enable hardware byte-swap of register reads
-- * and writes at reset. This avoid the need to byte-swap the data in software.
-- * However, the registers in a certain area from 0x4000 to 0x4fff (PCI clock
-- * domain registers) are not byte swapped!
-- *
-- * Since Linux I/O primitives default to little-endian operations, we only
-- * need to suppress byte-swapping on big-endian systems outside the area used
-- * by the PCI clock domain registers.
- */
--#if (AH_BYTE_ORDER == AH_BIG_ENDIAN)
--#define is_reg_le(__reg) ((0x4000 <= (__reg) && (__reg) < 0x5000))
--#else
--#define is_reg_le(__reg) 1
--#endif
--
--#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12)
--#define _OS_REG_WRITE(_ah, _reg, _val) do { \
-- is_reg_le(_reg) ? \
-- iowrite32((_val), (_ah)->ah_sh + (_reg)) : \
-- iowrite32be((_val), (_ah)->ah_sh + (_reg)); \
-- } while (0)
--#define _OS_REG_READ(_ah, _reg) \
-- (is_reg_le(_reg) ? \
-- ioread32((_ah)->ah_sh + (_reg)) : \
-- ioread32be((_ah)->ah_sh + (_reg)))
--#else
- #define _OS_REG_WRITE(_ah, _reg, _val) do { \
-- writel(is_reg_le(_reg) ? \
-- (_val) : cpu_to_le32(_val), \
-- (_ah)->ah_sh + (_reg)); \
-- } while (0)
-+ __raw_writel(SWAPREG(_ah, _reg, _val), (_ah)->ah_sh + (_reg)); \
-+} while (0)
- #define _OS_REG_READ(_ah, _reg) \
-- (is_reg_le(_reg) ? \
-- readl((_ah)->ah_sh + (_reg)) : \
-- cpu_to_le32(readl((_ah)->ah_sh + (_reg))))
--#endif /* KERNEL_VERSION(2,6,12) */
-+ SWAPREG(_ah, _reg, __raw_readl((_ah)->ah_sh + (_reg)))
-
- /*
- * The functions in this section are not intended to be invoked by MadWifi
---- a/ath/if_ath_hal.h
-+++ b/ath/if_ath_hal.h
-@@ -778,17 +778,6 @@ static inline HAL_STATUS ath_hal_getcapa
- return ret;
- }
-
--static inline HAL_BOOL ath_hal_radar_wait(struct ath_hal *ah, HAL_CHANNEL *a1)
--{
-- HAL_BOOL ret;
-- ATH_HAL_LOCK_IRQ(ah->ah_sc);
-- ath_hal_set_function(__func__);
-- ret = ah->ah_radarWait(ah, a1);
-- ath_hal_set_function(NULL);
-- ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
-- return ret;
--}
--
- static inline HAL_BOOL ath_hal_setmcastfilterindex(struct ath_hal *ah,
- u_int32_t index)
- {
-@@ -1268,8 +1257,6 @@ static inline void ath_hal_dump_map(stru
- /* HAL_STATUS ah_getCapability(struct ath_hal *ah, HAL_CAPABILITY_TYPE a1, u_int32_t capability, u_int32_t *result) */
- __print_symbol("%s=ah_getCapability\n",
- (unsigned long)ah->ah_getCapability);
-- /* HAL_BOOL ah_radarWait(struct ath_hal *ah, HAL_CHANNEL *a1) */
-- __print_symbol("%s=ah_radarWait\n", (unsigned long)ah->ah_radarWait);
- /* HAL_BOOL ah_setMulticastFilterIndex(struct ath_hal *ah, u_int32_t index) */
- __print_symbol("%s=ah_setMulticastFilterIndex\n",
- (unsigned long)ah->ah_setMulticastFilterIndex);
projects / openwrt / staging / chunkeey.git / blobdiff