+++ /dev/null
-/*
- * MikroTik RouterBOARD 4xx series support
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mdio-gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/pci.h>
-#include <asm/mach-ar71xx/rb4xx_cpld.h>
-
-#include "machtype.h"
-#include "devices.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-
-#define RB4XX_GPIO_USER_LED 4
-#define RB4XX_GPIO_RESET_SWITCH 7
-
-#define RB4XX_GPIO_CPLD_BASE 32
-#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
-#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
-#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
-#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
-#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
-
-#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
-
-static struct gpio_led rb4xx_leds_gpio[] __initdata = {
- {
- .name = "rb4xx:yellow:user",
- .gpio = RB4XX_GPIO_USER_LED,
- .active_low = 0,
- }, {
- .name = "rb4xx:green:led1",
- .gpio = RB4XX_GPIO_CPLD_LED1,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led2",
- .gpio = RB4XX_GPIO_CPLD_LED2,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led3",
- .gpio = RB4XX_GPIO_CPLD_LED3,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led4",
- .gpio = RB4XX_GPIO_CPLD_LED4,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led5",
- .gpio = RB4XX_GPIO_CPLD_LED5,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
- {
- .desc = "reset_switch",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RB4XX_GPIO_RESET_SWITCH,
- .active_low = 1,
- }
-};
-
-static struct platform_device rb4xx_nand_device = {
- .name = "rb4xx-nand",
- .id = -1,
-};
-
-static struct ar71xx_pci_irq rb4xx_pci_irqs[] __initdata = {
- {
- .slot = 0,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV2,
- }, {
- .slot = 1,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV0,
- }, {
- .slot = 1,
- .pin = 2,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }, {
- .slot = 2,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV1,
- }, {
- .slot = 3,
- .pin = 1,
- .irq = AR71XX_PCI_IRQ_DEV2,
- }
-};
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition rb4xx_partitions[] = {
- {
- .name = "routerboot",
- .offset = 0,
- .size = 0x0b000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "hard_config",
- .offset = 0x0b000,
- .size = 0x01000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "bios",
- .offset = 0x0d000,
- .size = 0x02000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "soft_config",
- .offset = 0x0f000,
- .size = 0x01000,
- }
-};
-#define rb4xx_num_partitions ARRAY_SIZE(rb4xx_partitions)
-#else /* CONFIG_MTD_PARTITIONS */
-#define rb4xx_partitions NULL
-#define rb4xx_num_partitions 0
-#endif /* CONFIG_MTD_PARTITIONS */
-
-static struct flash_platform_data rb4xx_flash_data = {
- .type = "pm25lv512",
- .parts = rb4xx_partitions,
- .nr_parts = rb4xx_num_partitions,
-};
-
-static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
- .gpio_base = RB4XX_GPIO_CPLD_BASE,
-};
-
-static struct mmc_spi_platform_data rb4xx_mmc_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct spi_board_info rb4xx_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &rb4xx_flash_data,
- }, {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "spi-rb4xx-cpld",
- .platform_data = &rb4xx_cpld_data,
- }
-};
-
-static struct spi_board_info rb4xx_microsd_info[] = {
- {
- .bus_num = 0,
- .chip_select = 2,
- .max_speed_hz = 25000000,
- .modalias = "mmc_spi",
- .platform_data = &rb4xx_mmc_data,
- }
-};
-
-
-static struct resource rb4xx_spi_resources[] = {
- {
- .start = AR71XX_SPI_BASE,
- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rb4xx_spi_device = {
- .name = "rb4xx-spi",
- .id = -1,
- .resource = rb4xx_spi_resources,
- .num_resources = ARRAY_SIZE(rb4xx_spi_resources),
-};
-
-static void __init rb4xx_generic_setup(void)
-{
- ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
-
- ar71xx_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rb4xx_gpio_keys),
- rb4xx_gpio_keys);
-
- spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
- platform_device_register(&rb4xx_spi_device);
- platform_device_register(&rb4xx_nand_device);
-}
-
-static void __init rb411_setup(void)
-{
- rb4xx_generic_setup();
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-
- ar71xx_add_device_mdio(0, 0xfffffffc);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.phy_mask = 0x00000003;
-
- ar71xx_add_device_eth(0);
-
- ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
-}
-
-MIPS_MACHINE(AR71XX_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
- rb411_setup);
-
-static void __init rb411u_setup(void)
-{
- rb411_setup();
- ar71xx_add_device_usb();
-}
-
-MIPS_MACHINE(AR71XX_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
- rb411u_setup);
-
-#define RB433_LAN_PHYMASK BIT(0)
-#define RB433_WAN_PHYMASK BIT(4)
-#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
-
-static void __init rb433_setup(void)
-{
- rb4xx_generic_setup();
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-
- ar71xx_add_device_mdio(0, ~RB433_MDIO_PHYMASK);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1);
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.phy_mask = RB433_LAN_PHYMASK;
-
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0);
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.phy_mask = RB433_WAN_PHYMASK;
-
- ar71xx_add_device_eth(1);
- ar71xx_add_device_eth(0);
-
- ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
-}
-
-MIPS_MACHINE(AR71XX_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
- rb433_setup);
-
-static void __init rb433u_setup(void)
-{
- rb433_setup();
- ar71xx_add_device_usb();
-}
-
-MIPS_MACHINE(AR71XX_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
- rb433u_setup);
-
-#define RB450_LAN_PHYMASK BIT(0)
-#define RB450_WAN_PHYMASK BIT(4)
-#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
-
-static void __init rb450_generic_setup(int gige)
-{
- rb4xx_generic_setup();
- ar71xx_add_device_mdio(0, ~RB450_MDIO_PHYMASK);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 1);
- ar71xx_eth0_data.phy_if_mode = (gige) ?
- PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.phy_mask = RB450_LAN_PHYMASK;
-
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 0);
- ar71xx_eth1_data.phy_if_mode = (gige) ?
- PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.phy_mask = RB450_WAN_PHYMASK;
-
- ar71xx_add_device_eth(1);
- ar71xx_add_device_eth(0);
-}
-
-static void __init rb450_setup(void)
-{
- rb450_generic_setup(0);
-}
-
-MIPS_MACHINE(AR71XX_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
- rb450_setup);
-
-static void __init rb450g_setup(void)
-{
- rb450_generic_setup(1);
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-}
-
-MIPS_MACHINE(AR71XX_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
- rb450g_setup);
-
-static void __init rb493_setup(void)
-{
- rb4xx_generic_setup();
-
- ar71xx_add_device_mdio(0, 0x3fffff00);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ar71xx_eth0_data.speed = SPEED_100;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
-
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ar71xx_eth1_data.phy_mask = 0x00000001;
-
- ar71xx_add_device_eth(0);
- ar71xx_add_device_eth(1);
-
- ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
-}
-
-MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
- rb493_setup);
-
-#define RB493G_GPIO_MDIO_MDC 7
-#define RB493G_GPIO_MDIO_DATA 8
-
-#define RB493G_MDIO_PHYMASK BIT(0)
-
-static struct mdio_gpio_platform_data rb493g_mdio_data = {
- .mdc = RB493G_GPIO_MDIO_MDC,
- .mdio = RB493G_GPIO_MDIO_DATA,
-
- .phy_mask = ~RB493G_MDIO_PHYMASK,
-};
-
-static struct platform_device rb493g_mdio_device = {
- .name = "mdio-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rb493g_mdio_data,
- },
-};
-
-static void __init rb493g_setup(void)
-{
- ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
-
- spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
- platform_device_register(&rb4xx_spi_device);
- platform_device_register(&rb4xx_nand_device);
-
- ar71xx_add_device_mdio(0, ~RB493G_MDIO_PHYMASK);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
- ar71xx_eth0_data.speed = SPEED_1000;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
-
- ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
- ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
- ar71xx_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
- ar71xx_eth1_data.speed = SPEED_1000;
- ar71xx_eth1_data.duplex = DUPLEX_FULL;
-
-
- platform_device_register(&rb493g_mdio_device);
-
- ar71xx_add_device_eth(1);
- ar71xx_add_device_eth(0);
-
- ar71xx_add_device_usb();
-
- ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
-}
-
-MIPS_MACHINE(AR71XX_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
- rb493g_setup);
projects / openwrt / staging / chunkeey.git / blobdiff