bcm27xx: remove linux 5.10 compatibility

[openwrt/staging/chunkeey.git] / target / linux / bcm27xx / patches-5.10 / 950-0173-net-phy-2711-Allow-ethernet-LED-mode-to-be-set-via-d.patch

diff --git a/target/linux/bcm27xx/patches-5.10/950-0173-net-phy-2711-Allow-ethernet-LED-mode-to-be-set-via-d.patch b/target/linux/bcm27xx/patches-5.10/950-0173-net-phy-2711-Allow-ethernet-LED-mode-to-be-set-via-d.patch
deleted file mode 100644 (file)
index d755615..0000000
--- a/target/linux/bcm27xx/patches-5.10/950-0173-net-phy-2711-Allow-ethernet-LED-mode-to-be-set-via-d.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 3ab0c4b6aa76a4dedb51c4e800b5b4ba29187c46 Mon Sep 17 00:00:00 2001
-From: James Hughes <james.hughes@raspberrypi.org>
-Date: Thu, 31 Oct 2019 14:39:44 +0000
-Subject: [PATCH] net:phy:2711 Allow ethernet LED mode to be set via
- device tree
-
-Add device tree entries and code to allow the specification of
-the lighting modes for the LED's on the ethernet connector.
-
-Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
----
- drivers/net/phy/broadcom.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -314,6 +314,9 @@ static void bcm54xx_adjust_rxrefclk(stru
- static int bcm54xx_config_init(struct phy_device *phydev)
- {
-       int reg, err, val;
-+      u32 led_modes[] = {BCM_LED_MULTICOLOR_LINK_ACT,
-+                         BCM_LED_MULTICOLOR_LINK_ACT};
-+      struct device_node *np = phydev->mdio.dev.of_node;
- 
-       reg = phy_read(phydev, MII_BCM54XX_ECR);
-       if (reg < 0)
-@@ -369,6 +372,8 @@ static int bcm54xx_config_init(struct ph
- 
-       bcm54xx_phydsp_config(phydev);
- 
-+      of_property_read_u32_array(np, "led-modes", led_modes, 2);
-+
-       /* Encode link speed into LED1 and LED3 pair (green/amber).
-        * Also flash these two LEDs on activity. This means configuring
-        * them for MULTICOLOR and encoding link/activity into them.
-@@ -378,8 +383,8 @@ static int bcm54xx_config_init(struct ph
-       bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
- 
-       val = BCM_LED_MULTICOLOR_IN_PHASE |
--              BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
--              BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
-+              BCM5482_SHD_LEDS1_LED1(led_modes[0]) |
-+              BCM5482_SHD_LEDS1_LED3(led_modes[1]);
-       bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
- 
-       return 0;