bcm27xx: remove linux 5.10 compatibility

[openwrt/staging/chunkeey.git] / target / linux / bcm27xx / patches-5.10 / 950-0462-ARM-dts-bcm2711-Add-the-CEC-interrupt-controller.patch

diff --git a/target/linux/bcm27xx/patches-5.10/950-0462-ARM-dts-bcm2711-Add-the-CEC-interrupt-controller.patch b/target/linux/bcm27xx/patches-5.10/950-0462-ARM-dts-bcm2711-Add-the-CEC-interrupt-controller.patch
deleted file mode 100644 (file)
index 24ca6c6..0000000
--- a/target/linux/bcm27xx/patches-5.10/950-0462-ARM-dts-bcm2711-Add-the-CEC-interrupt-controller.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 37e369738ad24d0e43a5db645dcf3a7c434d0db9 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime@cerno.tech>
-Date: Mon, 11 Jan 2021 15:23:09 +0100
-Subject: [PATCH] ARM: dts: bcm2711: Add the CEC interrupt controller
-
-The CEC and hotplug interrupts go through an interrupt controller shared
-between the two HDMI controllers.
-
-Let's add that interrupt controller and the interrupts for both HDMI
-controllers
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
----
- arch/arm/boot/dts/bcm2711.dtsi | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/bcm2711.dtsi
-+++ b/arch/arm/boot/dts/bcm2711.dtsi
-@@ -309,6 +309,14 @@
-                       #reset-cells = <1>;
-               };
- 
-+              aon_intr: interrupt-controller@7ef00100 {
-+                      compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
-+                      reg = <0x7ef00100 0x30>;
-+                      interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-+                      interrupt-controller;
-+                      #interrupt-cells = <1>;
-+              };
-+
-               hdmi0: hdmi@7ef00700 {
-                       compatible = "brcm,bcm2711-hdmi0";
-                       reg = <0x7ef00700 0x300>,
-@@ -337,6 +345,11 @@
-                                <&clk_27MHz>;
-                       clock-names = "hdmi", "bvb", "audio", "cec";
-                       resets = <&dvp 0>;
-+                      interrupt-parent = <&aon_intr>;
-+                      interrupts = <0>, <1>, <2>,
-+                                   <3>, <4>, <5>;
-+                      interrupt-names = "cec-tx", "cec-rx", "cec-low",
-+                                        "wakeup", "hpd-connected", "hpd-removed";
-                       ddc = <&ddc0>;
-                       dmas = <&dma 10>;
-                       dma-names = "audio-rx";
-@@ -381,6 +394,11 @@
-                                <&dvp 0>,
-                                <&clk_27MHz>;
-                       resets = <&dvp 1>;
-+                      interrupt-parent = <&aon_intr>;
-+                      interrupts = <8>, <7>, <6>,
-+                                   <9>, <10>, <11>;
-+                      interrupt-names = "cec-tx", "cec-rx", "cec-low",
-+                                        "wakeup", "hpd-connected", "hpd-removed";
-                       dmas = <&dma 17>;
-                       dma-names = "audio-rx";
-                       interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;