bcm27xx: remove linux 5.10 compatibility

[openwrt/staging/chunkeey.git] / target / linux / bcm27xx / patches-5.10 / 950-0499-overlays-Improve-the-i2c-rtc-i2c_csi_dsi-option.patch

diff --git a/target/linux/bcm27xx/patches-5.10/950-0499-overlays-Improve-the-i2c-rtc-i2c_csi_dsi-option.patch b/target/linux/bcm27xx/patches-5.10/950-0499-overlays-Improve-the-i2c-rtc-i2c_csi_dsi-option.patch
deleted file mode 100644 (file)
index a9ec817..0000000
--- a/target/linux/bcm27xx/patches-5.10/950-0499-overlays-Improve-the-i2c-rtc-i2c_csi_dsi-option.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 7792f64f6d4fbd67ed99e63ad7e828430adb6bac Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.com>
-Date: Thu, 11 Mar 2021 16:11:46 +0000
-Subject: [PATCH] overlays: Improve the i2c-rtc,i2c_csi_dsi option
-
-The i2c_csi_dsi parameter of the i2c-rtc overlay (added for the CM4IO
-board) causes the RTC devices to be probed on the I2C0 bus appearing
-on GPIOs 44 and 45. However, it didn't enable the other nodes necessary
-for it to work - "dtparam=i2c_vc=on" was also required.
-
-Fix that.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.com>
----
- arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/i2c-rtc-overlay.dts
-@@ -252,6 +252,20 @@
-               };
-       };
- 
-+      fragment@101 {
-+              target = <&i2c0if>;
-+              __dormant__ {
-+                      status = "okay";
-+              };
-+      };
-+
-+      fragment@102 {
-+              target = <&i2c0mux>;
-+              __dormant__ {
-+                      status = "okay";
-+              };
-+      };
-+
-       __overrides__ {
-               abx80x = <0>,"+0";
-               ds1307 = <0>,"+1";
-@@ -273,7 +287,8 @@
-               pcf85063a = <0>,"+16";
- 
-               i2c0 = <&frag100>, "target:0=",<&i2c0>;
--              i2c_csi_dsi = <&frag100>, "target:0=",<&i2c_csi_dsi>;
-+              i2c_csi_dsi = <&frag100>, "target:0=",<&i2c_csi_dsi>,
-+                            <0>,"+101+102";
- 
-               addr = <&abx80x>, "reg:0",
-                      <&ds1307>, "reg:0",