bcm27xx: remove linux 5.10 compatibility

[openwrt/staging/chunkeey.git] / target / linux / bcm27xx / patches-5.10 / 950-0625-overlays-Add-ssd1331-spi-support-for-OLED-screen.patch

diff --git a/target/linux/bcm27xx/patches-5.10/950-0625-overlays-Add-ssd1331-spi-support-for-OLED-screen.patch b/target/linux/bcm27xx/patches-5.10/950-0625-overlays-Add-ssd1331-spi-support-for-OLED-screen.patch
deleted file mode 100644 (file)
index e04a725..0000000
--- a/target/linux/bcm27xx/patches-5.10/950-0625-overlays-Add-ssd1331-spi-support-for-OLED-screen.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 32a85be60c722eff17ccade5d3e12971aad15f61 Mon Sep 17 00:00:00 2001
-From: Alex Kurichenko <oleksandr.kurichenko@deluxe.com>
-Date: Tue, 1 Jun 2021 01:53:47 +0300
-Subject: [PATCH] overlays: Add ssd1331-spi support for OLED screen
-
-Signed-off-by: Alex Kurichenko <oleksandr.kurichenko@deluxe.com>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             | 11 +++
- .../boot/dts/overlays/ssd1331-spi-overlay.dts | 83 +++++++++++++++++++
- 3 files changed, 95 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/ssd1331-spi-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -196,6 +196,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
-       spi6-2cs.dtbo \
-       ssd1306.dtbo \
-       ssd1306-spi.dtbo \
-+      ssd1331-spi.dtbo \
-       ssd1351-spi.dtbo \
-       superaudioboard.dtbo \
-       sx150x.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -3015,6 +3015,17 @@ Params: speed                   SPI bus
-         height                  Display height (32 or 64; default 64)
- 
- 
-+Name:   ssd1331-spi
-+Info:   Overlay for SSD1331 OLED via SPI using fbtft staging driver.
-+Load:   dtoverlay=ssd1331-spi,<param>=<val>
-+Params: speed                   SPI bus speed (default 4500000)
-+        rotate                  Display rotation (0, 90, 180 or 270; default 0)
-+        fps                     Delay between frame updates (default 25)
-+        debug                   Debug output level (0-7; default 0)
-+        dc_pin                  GPIO pin for D/C (default 24)
-+        reset_pin               GPIO pin for RESET (default 25)
-+
-+
- Name:   ssd1351-spi
- Info:   Overlay for SSD1351 OLED via SPI using fbtft staging driver.
- Load:   dtoverlay=ssd1351-spi,<param>=<val>
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/ssd1331-spi-overlay.dts
-@@ -0,0 +1,83 @@
-+/*
-+ * Device Tree overlay for SSD1331 based SPI OLED display
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+        compatible = "brcm,bcm2835";
-+
-+        fragment@0 {
-+                target = <&spi0>;
-+                __overlay__ {
-+                        status = "okay";
-+                };
-+        };
-+
-+        fragment@1 {
-+                target = <&spidev0>;
-+                __overlay__ {
-+                        status = "disabled";
-+                };
-+        };
-+
-+        fragment@2 {
-+                target = <&spidev1>;
-+                __overlay__ {
-+                        status = "disabled";
-+                };
-+        };
-+
-+        fragment@3 {
-+                target = <&gpio>;
-+                __overlay__ {
-+                        ssd1331_pins: ssd1331_pins {
-+                                brcm,pins = <25 24>;
-+                                brcm,function = <1 1>; /* out out */
-+                        };
-+                };
-+        };
-+
-+        fragment@4 {
-+                target = <&spi0>;
-+                __overlay__ {
-+                        /* needed to avoid dtc warning */
-+                        #address-cells = <1>;
-+                        #size-cells = <0>;
-+
-+                        ssd1331: ssd1331@0{
-+                                compatible = "solomon,ssd1331";
-+                                reg = <0>;
-+                                pinctrl-names = "default";
-+                                pinctrl-0 = <&ssd1331_pins>;
-+
-+                                spi-max-frequency = <4500000>;
-+                                bgr = <0>;
-+                                bpp = <16>;
-+                                rotate = <0>;
-+                                fps = <25>;
-+                                buswidth = <8>;
-+                                reset-gpios = <&gpio 25 1>;
-+                                dc-gpios = <&gpio 24 0>;
-+                                debug = <0>;
-+
-+                                solomon,height = <64>;
-+                                solomon,width = <96>;
-+                                solomon,page-offset = <0>;
-+                        };
-+                };
-+        };
-+
-+        __overrides__ {
-+                speed     = <&ssd1331>,"spi-max-frequency:0";
-+                rotate    = <&ssd1331>,"rotate:0";
-+                fps       = <&ssd1331>,"fps:0";
-+                debug     = <&ssd1331>,"debug:0";
-+                dc_pin    = <&ssd1331>,"dc-gpios:4",
-+                            <&ssd1331_pins>,"brcm,pins:4";
-+                reset_pin = <&ssd1331>,"reset-gpios:4",
-+                            <&ssd1331_pins>,"brcm,pins:0";
-+        };
-+};