bcm27xx: remove linux 5.10 compatibility

[openwrt/staging/chunkeey.git] / target / linux / bcm27xx / patches-5.10 / 950-0657-Documentation-devicetree-Add-documentation-for-imx37.patch

diff --git a/target/linux/bcm27xx/patches-5.10/950-0657-Documentation-devicetree-Add-documentation-for-imx37.patch b/target/linux/bcm27xx/patches-5.10/950-0657-Documentation-devicetree-Add-documentation-for-imx37.patch
deleted file mode 100644 (file)
index cd2c028..0000000
--- a/target/linux/bcm27xx/patches-5.10/950-0657-Documentation-devicetree-Add-documentation-for-imx37.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From 8b4767bd7bc7e8ae5d115b3a8dabc4fd7e855f4b Mon Sep 17 00:00:00 2001
-From: David Plowman <david.plowman@raspberrypi.com>
-Date: Tue, 29 Jun 2021 14:38:23 +0100
-Subject: [PATCH] Documentation: devicetree: Add documentation for
- imx378 sensor
-
-The imx378 sensor is compatible with the imx477 and shares common
-device tree settings.
-
-Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
----
- .../devicetree/bindings/media/i2c/imx378.yaml | 113 ++++++++++++++++++
- MAINTAINERS                                   |   1 +
- 2 files changed, 114 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/media/i2c/imx378.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/media/i2c/imx378.yaml
-@@ -0,0 +1,113 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/media/i2c/imx378.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor
-+
-+maintainers:
-+  - Naushir Patuck <naush@raspberypi.com>
-+
-+description: |-
-+  The Sony IMX378 is a 1/2.3-inch CMOS active pixel digital image sensor
-+  with an active array size of 4056H x 3040V. It is programmable through
-+  I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
-+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
-+  4 data lanes.
-+
-+properties:
-+  compatible:
-+    const: sony,imx378
-+
-+  reg:
-+    description: I2C device address
-+    maxItems: 1
-+
-+  clocks:
-+    maxItems: 1
-+
-+  VDIG-supply:
-+    description:
-+      Digital I/O voltage supply, 1.05 volts
-+
-+  VANA-supply:
-+    description:
-+      Analog voltage supply, 2.8 volts
-+
-+  VDDL-supply:
-+    description:
-+      Digital core voltage supply, 1.8 volts
-+
-+  reset-gpios:
-+    description: |-
-+      Reference to the GPIO connected to the xclr pin, if any.
-+      Must be released (set high) after all supplies and INCK are applied.
-+
-+  # See ../video-interfaces.txt for more details
-+  port:
-+    type: object
-+    properties:
-+      endpoint:
-+        type: object
-+        properties:
-+          data-lanes:
-+            description: |-
-+              The sensor supports either two-lane, or four-lane operation.
-+              For two-lane operation the property must be set to <1 2>.
-+            items:
-+              - const: 1
-+              - const: 2
-+
-+          clock-noncontinuous:
-+            type: boolean
-+            description: |-
-+              MIPI CSI-2 clock is non-continuous if this property is present,
-+              otherwise it's continuous.
-+
-+          link-frequencies:
-+            allOf:
-+              - $ref: /schemas/types.yaml#/definitions/uint64-array
-+            description:
-+              Allowed data bus frequencies.
-+
-+        required:
-+          - link-frequencies
-+
-+required:
-+  - compatible
-+  - reg
-+  - clocks
-+  - VANA-supply
-+  - VDIG-supply
-+  - VDDL-supply
-+  - port
-+
-+additionalProperties: false
-+
-+examples:
-+  - |
-+    i2c0 {
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+
-+        imx378: sensor@10 {
-+            compatible = "sony,imx378";
-+            reg = <0x1a>;
-+            clocks = <&imx378_clk>;
-+            VANA-supply = <&imx378_vana>;   /* 2.8v */
-+            VDIG-supply = <&imx378_vdig>;   /* 1.05v */
-+            VDDL-supply = <&imx378_vddl>;   /* 1.8v */
-+
-+            port {
-+                imx378_0: endpoint {
-+                    remote-endpoint = <&csi1_ep>;
-+                    data-lanes = <1 2>;
-+                    clock-noncontinuous;
-+                    link-frequencies = /bits/ 64 <450000000>;
-+                };
-+            };
-+        };
-+    };
-+
-+...
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -16360,6 +16360,7 @@ M:     Raspberry Pi Kernel Maintenance <kern
- L:    linux-media@vger.kernel.org
- S:    Maintained
- T:    git git://linuxtv.org/media_tree.git
-+F:    Documentation/devicetree/bindings/media/i2c/imx378.yaml
- F:    Documentation/devicetree/bindings/media/i2c/imx477.yaml
- F:    drivers/media/i2c/imx477.c
-