################################################################################
-## Raspberry Pi Configuration Settings
-##
-## Revision 14, 2012/10/22
-##
-## Details taken from the eLinux wiki
-## For up-to-date information please refer to wiki page.
-##
-## Wiki Location : http://elinux.org/RPi_config.txt
-##
-##
-## Description:
-## Details of each setting are described with each section that begins with
-## a double hashed comment ('##')
-## It is up to the user to remove the single hashed comment ('#') from each
-## option they want to enable, and to set the specific value of that option.
-##
-## WARNING: Setting the following combination of parameters will set a
-## permanent bit within the SOC and your warranty is void.
-## over_voltage>0, and at least one of the following:
-## force_turbo=1
-## current_limit_override=0x5A000020
-## temp_limit>85
-##
-## Overclock settings will be disabled at runtime if the SoC reaches temp_limit
-##
+# Bootloader configuration - config.txt
################################################################################
################################################################################
-## Standard Definition Video Settings
+# For overclocking and various other settings, see:
+# https://www.raspberrypi.org/documentation/configuration/config-txt/README.md
################################################################################
-
-## sdtv_mode
-## defines the TV standard for composite output
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Normal NTSC (Default)
-## 1 Japanese version of NTSC - no pedestal
-## 2 Normal PAL
-## 3 Brazilian version of PAL - 525/60 rather than 625/50, different
-## subcarrier
-##
-#sdtv_mode=0
-
-## sdtv_aspect
-## defines the aspect ratio for composite output
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 1 4:3 (Default)
-## 2 14:9
-## 3 16:9
-##
-#sdtv_aspect=1
-
-## sdtv_disable_colourburst
-## Disables colour burst on composite output. The picture will be
-## monochrome, but possibly sharper
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Colour burst is enabled (Default)
-## 1 Colour burst is disabled
-##
-#sdtv_disable_colourburst=1
-
-################################################################################
-## High Definition Video Settings
-################################################################################
-
-## hdmi_safe
-## Use "safe mode" settings to try to boot with maximum hdmi compatibility.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Disabled (Default)
-## 1 Enabled (this does: hdmi_force_hotplug=1, config_hdmi_boost=4,
-## hdmi_group=1, hdmi_mode=1,
-## disable_overscan=0)
-##
-#hdmi_safe=1
-
-## hdmi_force_hotplug
-## Pretends HDMI hotplug signal is asserted so it appears a HDMI display
-## is attached
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Disabled (Default)
-## 1 Use HDMI mode even if no HDMI monitor is detected
-##
-#hdmi_force_hotplug=1
-
-## hdmi_ignore_hotplug
-## Pretends HDMI hotplug signal is not asserted so it appears a HDMI
-## display is not attached
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Disabled (Default)
-## 1 Use composite mode even if HDMI monitor is detected
-##
-#hdmi_ignore_hotplug=1
-
-## hdmi_drive
-## chooses between HDMI and DVI modes
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 1 Normal DVI mode (No sound)
-## 2 Normal HDMI mode (Sound will be sent if supported and enabled)
-##
-#hdmi_drive=2
-
-## hdmi_ignore_edid
-## Enables the ignoring of EDID/display data
-##
-#hdmi_ignore_edid=0xa5000080
-
-## hdmi_edid_file
-## Read the EDID data from the edid.dat file instead of from the attached
-## device
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Read EDID data from attached device (Default)
-## 1 Read EDID data from edid.txt file
-##
-#hdmi_edid_file=1
-
-## hdmi_force_edid_audio
-## Pretends all audio formats are supported by display, allowing
-## passthrough of DTS/AC3 even when not reported as supported.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Use EDID provided values (Default)
-## 1 Pretend all audio formats are supported
-##
-#hdmi_force_edid_audio=1
-
-## avoid_edid_fuzzy_match
-## Avoid fuzzy matching of modes described in edid.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Use fuzzy matching (Default)
-## 1 Avoid fuzzy matching
-##
-#avoid_edid_fuzzy_match=1
-
-## hdmi_group
-## Defines the HDMI type
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Use the preferred group reported by the edid (Default)
-## 1 CEA
-## 2 DMT
-##
-#hdmi_group=1
-
-## hdmi_mode
-## defines screen resolution in CEA or DMT format
-##
-## H means 16:9 variant (of a normally 4:3 mode).
-## 2x means pixel doubled (i.e. higher clock rate, with each pixel repeated
-## twice)
-## 4x means pixel quadrupled (i.e. higher clock rate, with each pixel
-## repeated four times)
-## reduced blanking means fewer bytes are used for blanking within the data
-## stream (i.e. lower clock rate, with fewer wasted bytes)
-##
-## Value hdmi_group=CEA hdmi_group=DMT
-## -------------------------------------------------------------------------
-## 1 VGA 640x350 85Hz
-## 2 480p 60Hz 640x400 85Hz
-## 3 480p 60Hz H 720x400 85Hz
-## 4 720p 60Hz 640x480 60Hz
-## 5 1080i 60Hz 640x480 72Hz
-## 6 480i 60Hz 640x480 75Hz
-## 7 480i 60Hz H 640x480 85Hz
-## 8 240p 60Hz 800x600 56Hz
-## 9 240p 60Hz H 800x600 60Hz
-## 10 480i 60Hz 4x 800x600 72Hz
-## 11 480i 60Hz 4x H 800x600 75Hz
-## 12 240p 60Hz 4x 800x600 85Hz
-## 13 240p 60Hz 4x H 800x600 120Hz
-## 14 480p 60Hz 2x 848x480 60Hz
-## 15 480p 60Hz 2x H 1024x768 43Hz DO NOT USE
-## 16 1080p 60Hz 1024x768 60Hz
-## 17 576p 50Hz 1024x768 70Hz
-## 18 576p 50Hz H 1024x768 75Hz
-## 19 720p 50Hz 1024x768 85Hz
-## 20 1080i 50Hz 1024x768 120Hz
-## 21 576i 50Hz 1152x864 75Hz
-## 22 576i 50Hz H 1280x768 reduced blanking
-## 23 288p 50Hz 1280x768 60Hz
-## 24 288p 50Hz H 1280x768 75Hz
-## 25 576i 50Hz 4x 1280x768 85Hz
-## 26 576i 50Hz 4x H 1280x768 120Hz reduced blanking
-## 27 288p 50Hz 4x 1280x800 reduced blanking
-## 28 288p 50Hz 4x H 1280x800 60Hz
-## 29 576p 50Hz 2x 1280x800 75Hz
-## 30 576p 50Hz 2x H 1280x800 85Hz
-## 31 1080p 50Hz 1280x800 120Hz reduced blanking
-## 32 1080p 24Hz 1280x960 60Hz
-## 33 1080p 25Hz 1280x960 85Hz
-## 34 1080p 30Hz 1280x960 120Hz reduced blanking
-## 35 480p 60Hz 4x 1280x1024 60Hz
-## 36 480p 60Hz 4x H 1280x1024 75Hz
-## 37 576p 50Hz 4x 1280x1024 85Hz
-## 38 576p 50Hz 4x H 1280x1024 120Hz reduced blanking
-## 39 1080i 50Hz reduced blanking 1360x768 60Hz
-## 40 1080i 100Hz 1360x768 120Hz reduced blanking
-## 41 720p 100Hz 1400x1050 reduced blanking
-## 42 576p 100Hz 1400x1050 60Hz
-## 43 576p 100Hz H 1400x1050 75Hz
-## 44 576i 100Hz 1400x1050 85Hz
-## 45 576i 100Hz H 1400x1050 120Hz reduced blanking
-## 46 1080i 120Hz 1440x900 reduced blanking
-## 47 720p 120Hz 1440x900 60Hz
-## 48 480p 120Hz 1440x900 75Hz
-## 49 480p 120Hz H 1440x900 85Hz
-## 50 480i 120Hz 1440x900 120Hz reduced blanking
-## 51 480i 120Hz H 1600x1200 60Hz
-## 52 576p 200Hz 1600x1200 65Hz
-## 53 576p 200Hz H 1600x1200 70Hz
-## 54 576i 200Hz 1600x1200 75Hz
-## 55 576i 200Hz H 1600x1200 85Hz
-## 56 480p 240Hz 1600x1200 120Hz reduced blanking
-## 57 480p 240Hz H 1680x1050 reduced blanking
-## 58 480i 240Hz 1680x1050 60Hz
-## 59 480i 240Hz H 1680x1050 75Hz
-## 60 1680x1050 85Hz
-## 61 1680x1050 120Hz reduced blanking
-## 62 1792x1344 60Hz
-## 63 1792x1344 75Hz
-## 64 1792x1344 120Hz reduced blanking
-## 65 1856x1392 60Hz
-## 66 1856x1392 75Hz
-## 67 1856x1392 120Hz reduced blanking
-## 68 1920x1200 reduced blanking
-## 69 1920x1200 60Hz
-## 70 1920x1200 75Hz
-## 71 1920x1200 85Hz
-## 72 1920x1200 120Hz reduced blanking
-## 73 1920x1440 60Hz
-## 74 1920x1440 75Hz
-## 75 1920x1440 120Hz reduced blanking
-## 76 2560x1600 reduced blanking
-## 77 2560x1600 60Hz
-## 78 2560x1600 75Hz
-## 79 2560x1600 85Hz
-## 80 2560x1600 120Hz reduced blanking
-## 81 1366x768 60Hz
-## 82 1080p 60Hz
-## 83 1600x900 reduced blanking
-## 84 2048x1152 reduced blanking
-## 85 720p 60Hz
-## 86 1366x768 reduced blanking
-##
-#hdmi_mode=1
-
-## config_hdmi_boost
-## configure the signal strength of the HDMI interface.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 (Default)
-## 1
-## 2
-## 3
-## 4 Try if you have interference issues with HDMI
-## 5
-## 6
-## 7 Maximum
-##
-#config_hdmi_boost=0
-
-## hdmi_ignore_cec_init
-## Doesn't sent initial active source message. Avoids bringing
-## (CEC enabled) TV out of standby and channel switch when rebooting.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Normal behaviour (Default)
-## 1 Doesn't sent initial active source message
-##
-#hdmi_ignore_cec_init=1
-
-## hdmi_ignore_cec
-## Pretends CEC is not supported at all by TV.
-## No CEC functions will be supported.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Normal behaviour (Default)
-## 1 Pretend CEC is not supported by TV
-##
-#hdmi_ignore_cec=1
-
-################################################################################
-## Overscan Video Settings
-################################################################################
-
-## overscan_left
-## Number of pixels to skip on left
-##
-#overscan_left=0
-
-## overscan_right
-## Number of pixels to skip on right
-##
-#overscan_right=0
-
-## overscan_top
-## Number of pixels to skip on top
-##
-#overscan_top=0
-
-## overscan_bottom
-## Number of pixels to skip on bottom
-##
-#overscan_bottom=0
-
-## disable_overscan
-## Set to 1 to disable overscan
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Overscan Enabled (Default)
-## 1 Overscan Disabled
-##
-#disable_overscan=1
-
-################################################################################
-## Framebuffer Video Settings
-################################################################################
-
-## framebuffer_width
-## Console framebuffer width in pixels. Default is display width minus
-## overscan.
-##
-#framebuffer_width=0
-
-## framebuffer_height
-## Console framebuffer height in pixels. Default is display height minus
-## overscan.
-##
-#framebuffer_height=0
-
-## framebuffer_depth
-## Console framebuffer depth in bits per pixel.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 8 Valid, but default RGB palette makes an unreadable screen
-## 16 (Default)
-## 24 Looks better but has corruption issues as of 2012/06/15
-## 32 Has no corruption issues but needs framebuffer_ignore_alpha=1
-## and shows the wrong colors as of 2012/06/15
-##
-#framebuffer_depth=16
-
-## framebuffer_ignore_alpha
-## Set to 1 to disable alpha channel. Helps with 32bit.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Enable Alpha Channel (Default)
-## 1 Disable Alpha Channel
-##
-#framebuffer_ignore_alpha=0
-
-################################################################################
-## General Video Settings
-################################################################################
-
-## display_rotate
-## Rotate the display clockwise or flip the display.
-## The 90 and 270 degrees rotation options require additional memory on GPU,
-## so won't work with the 16M GPU split.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 0 degrees (Default)
-## 1 90 degrees
-## 2 180 degrees
-## 3 270 degrees
-## 0x10000 Horizontal flip
-## 0x20000 Vertical flip
-##
-#display_rotate=0
-
-################################################################################
-## Licensed Codecs
-##
-## Hardware decoding of additional codecs can be enabled by purchasing a
-## license that is locked to the CPU serial number of your Raspberry Pi.
-##
-## Up to 8 licenses per CODEC can be specified as a comma seperated list.
-##
-################################################################################
-
-## decode_MPG2
-## License key to allow hardware MPEG-2 decoding.
-##
-#decode_MPG2=0x12345678
-
-## decode_WVC1
-## License key to allow hardware VC-1 decoding.
-##
-#decode_WVC1=0x12345678
-
-################################################################################
-## Test Settings
-################################################################################
-
-## test_mode
-## Enable test sound/image during boot for manufacturing test.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Disable Test Mod (Default)
-## 1 Enable Test Mode
-##
-#test_mode=0
-
-################################################################################
-## Memory Settings
-################################################################################
-
-## disable_l2cache
-## Disable arm access to GPU's L2 cache. Needs corresponding L2 disabled
-## kernel.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Enable L2 Cache (Default)
-## 1 Disable L2 cache
-##
-#disable_l2cache=0
-
-## gpu_mem
-## GPU memory allocation in MB for all board revisions.
-##
-## Default 64
-##
-#gpu_mem=128
-
-## gpu_mem_256
-## GPU memory allocation in MB for 256MB board revision.
-## This option overrides gpu_mem.
-##
-#gpu_mem_256=128
-
-## gpu_mem_512
-## GPU memory allocation in MB for 512MB board revision.
-## This option overrides gpu_mem.
-##
-#gpu_mem_512=128
-
-## gpu_mem_1024
-## GPU memory allocation in MB for 1024MB board revision.
-## This option overrides gpu_mem.
-##
-#gpu_mem_1024=128
-
-################################################################################
-## Boot Option Settings
-################################################################################
-
-## disable_commandline_tags
-## Stop start.elf from filling in ATAGS (memory from 0x100) before
-## launching kernel
-##
-#disable_commandline_tags=2
-
-## enable_uart
-## Enables or disables uart pin multiplexing
-## Raspberry Pi 1/2: if unset, uart is enabled by default
-## Raspberry Pi 3: if unset uart is disabled by default
-##
-enable_uart=1
-
-## cmdline (string)
-## Command line parameters. Can be used instead of cmdline.txt file
-##
-#cmdline=""
-
-## kernel (string)
-## Alternative name to use when loading kernel.
-##
-#kernel=""
-
-## kernel_address
-## Address to load kernel.img file at
-##
-#kernel_address=0x8000
-
-## ramfsfile (string)
-## ramfs file to load
-##
-#ramfsfile=""
-
-## ramfsaddr
-## Address to load ramfs file at
-##
-#ramfsaddr=0x00000000
-
-## initramfs (string address)
-## ramfs file and address to load it at (it's like ramfsfile+ramfsaddr in
-## one option).
-##
-## NOTE: this option uses different syntax than all other options - you
-## should not use "=" character here.
-##
-#initramfs initramf.gz 0x00800000
-
-## device_tree_address
-## Address to load device_tree at
-##
-#device_tree_address=0x100
-
-## init_uart_baud
-## Initial uart baud rate.
-##
-## Default 115200
-##
-#init_uart_baud=115200
-
-## init_uart_clock
-## Initial uart clock.
-##
-## Default 3000000 (3MHz)
-##
-#init_uart_clock=3000000
-
-## init_emmc_clock
-## Initial emmc clock, increasing this can speedup your SD-card.
-##
-## Default 100000000 (100mhz)
-##
-#init_emmc_clock=100000000
-
-## boot_delay
-## Wait for a given number of seconds in start.elf before loading
-## kernel.img.
-##
-## delay = (1000 * boot_delay) + boot_delay_ms
-##
-## Default 1
-##
-#boot_delay=0
-
-## boot_delay_ms
-## Wait for a given number of milliseconds in start.elf before loading
-## kernel.img.
-##
-## delay = (1000 * boot_delay) + boot_delay_ms
-##
-## Default 0
-##
-#boot_delay_ms=0
-
-## avoid_safe_mode
-## Adding a jumper between pins 5 & 6 of P1 enables a recovery Safe Mode.
-## If pins 5 & 6 are used for connecting to external devices (e.g. GPIO),
-## then this setting can be used to ensure Safe Mode is not triggered.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Respect Safe Mode input (Default)
-## 1 Ignore Safe Mode input
-##
-#avoid_safe_mode=1
-
-################################################################################
-## Overclocking Settings
-##
-## ARM, SDRAM and GPU each have their own PLLs and can have unrelated
-## frequencies.
-##
-## The GPU core, h264, v3d and isp share a PLL, so need to have related
-## frequencies.
-## pll_freq = floor(2400 / (2 * core_freq)) * (2 * core_freq)
-## gpu_freq = pll_freq / [even number]
-##
-## The effective gpu_freq is automatically rounded to nearest even integer, so
-## asking for core_freq = 500 and gpu_freq = 300 will result in divisor of
-## 2000/300 = 6.666 => 6 and so 333.33MHz.
-##
-##
-## Standard Profiles:
-## arm_freq core_freq sdram_freq over_voltage
-## -------------------------------------------------------------------------
-## None 700 250 400 0
-## Modest 800 300 400 0
-## Medium 900 333 450 2
-## High 950 450 450 6
-## Turbo 1000 500 500 6
-##
-################################################################################
-
-## force_turbo
-## Control the kernel "ondemand" governor. It has no effect if no overclock
-## settings are specified.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Enable dynamic clocks and voltage for the ARM core, GPU core and
-## SDRAM (Default).
-## Overclocking of h264_freq, v3d_freq and isp_freq is ignored.
-## 1 Disable dynamic clocks and voltage for the ARM core, GPU core
-## and SDRAM.
-## Overclocking of h264_freq, v3d_freq and isp_freq is allowed.
-##
-#force_turbo=0
-
-## initial_turbo
-## Enables turbo mode from boot for the given value in seconds (up to 60)
-## or until cpufreq sets a frequency. Can help with sdcard corruption if
-## overclocked.
-##
-## Default 0
-##
-#initial_turbo=0
-
-## temp_limit
-## Overheat protection. Sets clocks and voltages to default when the SoC
-## reaches this Celsius value.
-## Setting this higher than default voids warranty.
-##
-## Default 85
-##
-#temp_limit=85
-
-## arm_freq
-## Frequency of ARM in MHz.
-##
-## Default 700.
-##
-#arm_freq=700
-
-## arm_freq_min
-## Minimum frequency of ARM in MHz (used for dynamic clocking).
-##
-## Default 700.
-##
-#arm_freq_min=700
-
-## gpu_freq
-## Sets core_freq, h264_freq, isp_freq, v3d_freq together.
-##
-## Default 250.
-##
-#gpu_freq=250
-
-## core_freq
-## Frequency of GPU processor core in MHz. It has an impact on ARM
-## performance since it drives L2 cache.
-##
-## Default 250.
-##
-#core_freq=250
-
-## core_freq_min
-## Minimum frequency of GPU processor core in MHz (used for dynamic
-## clocking). It has an impact on ARM performance since it drives L2 cache.
-##
-## Default 250.
-##
-#core_freq_min=250
-
-## h264_freq
-## Frequency of hardware video block in MHz.
-##
-## Default 250.
-##
-#h264_freq=250
-
-## isp_freq
-## Frequency of image sensor pipeline block in MHz.
-##
-## Default 250.
-##
-#isp_freq=250
-
-## v3d_freq
-## Frequency of 3D block in MHz.
-##
-## Default 250.
-##
-#v3d_freq=250
-
-## sdram_freq
-## Frequency of SDRAM in MHz.
-##
-## Default 400.
-##
-#sdram_freq=400
-
-## sdram_freq_min
-## Minimum frequency of SDRAM in MHz (used for dynamic clocking).
-##
-## Default 400.
-##
-#sdram_freq_min=400
-
-## avoid_pwm_pll
-## Unlink core_freq from the rest of the gpu. Analog audio should still
-## work, but from a fractional divider, so lower quality.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## 0 Linked core_freq (Default)
-## 1 Unlinked core_freq
-##
-#avoid_pwm_pll=1
-
-################################################################################
-## Voltage Settings
-################################################################################
-
-## current_limit_override
-## Disables SMPS current limit protection. Can help if you are currently
-## hitting a reboot failure when overclocking too high.
-##
-#current_limit_override=0x5A000020
-
-## over_voltage
-## ARM/GPU core voltage adjust.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## -16 0.8 V
-## -15 0.825 V
-## -14 0.85 V
-## -13 0.875 V
-## -12 0.9 V
-## -11 0.925 V
-## -10 0.95 V
-## -9 0.975 V
-## -8 1.0 V
-## -7 1.025 V
-## -6 1.05 V
-## -5 1.075 V
-## -4 1.1 V
-## -3 1.125 V
-## -2 1.15 V
-## -1 1.175 V
-## 0 1.2 V (Default)
-## 1 1.225 V
-## 2 1.25 V
-## 3 1.275 V
-## 4 1.3 V
-## 5 1.325 V
-## 6 1.35 V
-## 7 1.375 V (requires force_turbo=1)
-## 8 1.4 V (requires force_turbo=1)
-##
-#over_voltage=0
-
-## over_voltage_min
-## Minimum ARM/GPU core voltage adjust (used for dynamic clocking).
-##
-## Value Description
-## -------------------------------------------------------------------------
-## -16 0.8 V
-## -15 0.825 V
-## -14 0.85 V
-## -13 0.875 V
-## -12 0.9 V
-## -11 0.925 V
-## -10 0.95 V
-## -9 0.975 V
-## -8 1.0 V
-## -7 1.025 V
-## -6 1.05 V
-## -5 1.075 V
-## -4 1.1 V
-## -3 1.125 V
-## -2 1.15 V
-## -1 1.175 V
-## 0 1.2 V (Default)
-## 1 1.225 V
-## 2 1.25 V
-## 3 1.275 V
-## 4 1.3 V
-## 5 1.325 V
-## 6 1.35 V
-## 7 1.375 V (requires force_turbo=1)
-## 8 1.4 V (requires force_turbo=1)
-##
-#over_voltage_min=0
-
-## over_voltage_sdram
-## Sets over_voltage_sdram_c, over_voltage_sdram_i, over_voltage_sdram_p
-## together
-##
-## Value Description
-## -------------------------------------------------------------------------
-## -16 0.8 V
-## -15 0.825 V
-## -14 0.85 V
-## -13 0.875 V
-## -12 0.9 V
-## -11 0.925 V
-## -10 0.95 V
-## -9 0.975 V
-## -8 1.0 V
-## -7 1.025 V
-## -6 1.05 V
-## -5 1.075 V
-## -4 1.1 V
-## -3 1.125 V
-## -2 1.15 V
-## -1 1.175 V
-## 0 1.2 V (Default)
-## 1 1.225 V
-## 2 1.25 V
-## 3 1.275 V
-## 4 1.3 V
-## 5 1.325 V
-## 6 1.35 V
-## 7 1.375 V
-## 8 1.4 V
-##
-#over_voltage_sdram=0
-
-## over_voltage_sdram_c
-## SDRAM controller voltage adjust.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## -16 0.8 V
-## -15 0.825 V
-## -14 0.85 V
-## -13 0.875 V
-## -12 0.9 V
-## -11 0.925 V
-## -10 0.95 V
-## -9 0.975 V
-## -8 1.0 V
-## -7 1.025 V
-## -6 1.05 V
-## -5 1.075 V
-## -4 1.1 V
-## -3 1.125 V
-## -2 1.15 V
-## -1 1.175 V
-## 0 1.2 V (Default)
-## 1 1.225 V
-## 2 1.25 V
-## 3 1.275 V
-## 4 1.3 V
-## 5 1.325 V
-## 6 1.35 V
-## 7 1.375 V
-## 8 1.4 V
-##
-#over_voltage_sdram_c=0
-
-## over_voltage_sdram_i
-## SDRAM I/O voltage adjust.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## -16 0.8 V
-## -15 0.825 V
-## -14 0.85 V
-## -13 0.875 V
-## -12 0.9 V
-## -11 0.925 V
-## -10 0.95 V
-## -9 0.975 V
-## -8 1.0 V
-## -7 1.025 V
-## -6 1.05 V
-## -5 1.075 V
-## -4 1.1 V
-## -3 1.125 V
-## -2 1.15 V
-## -1 1.175 V
-## 0 1.2 V (Default)
-## 1 1.225 V
-## 2 1.25 V
-## 3 1.275 V
-## 4 1.3 V
-## 5 1.325 V
-## 6 1.35 V
-## 7 1.375 V
-## 8 1.4 V
-##
-#over_voltage_sdram_i=0
-
-## over_voltage_sdram_p
-## SDRAM phy voltage adjust.
-##
-## Value Description
-## -------------------------------------------------------------------------
-## -16 0.8 V
-## -15 0.825 V
-## -14 0.85 V
-## -13 0.875 V
-## -12 0.9 V
-## -11 0.925 V
-## -10 0.95 V
-## -9 0.975 V
-## -8 1.0 V
-## -7 1.025 V
-## -6 1.05 V
-## -5 1.075 V
-## -4 1.1 V
-## -3 1.125 V
-## -2 1.15 V
-## -1 1.175 V
-## 0 1.2 V (Default)
-## 1 1.225 V
-## 2 1.25 V
-## 3 1.275 V
-## 4 1.3 V
-## 5 1.325 V
-## 6 1.35 V
-## 7 1.375 V
-## 8 1.4 V
-##
-#over_voltage_sdram_p=0
-
-################################################################################
-## Device Tree Settings
-################################################################################
-
-dtparam=random=on
-dtparam=watchdog=on
-dtparam=audio=on
-dtparam=i2c0=on
-dtparam=i2c1=on
-dtparam=spi=on
-
-#dtoverlay=adau1977-adc
-#dtoverlay=allo-piano-dac-pcm512x-audio
-#dtoverlay=audioinjector-wm8731-audio
-#dtoverlay=dionaudio-loco
-#dtoverlay=hifiberry-amp
-#dtoverlay=hifiberry-dac
-#dtoverlay=hifiberry-dacplus
-#dtoverlay=hifiberry-digi
-#dtoverlay=hifiberry-digi-pro
-#dtoverlay=iqaudio-dac
-#dtoverlay=iqaudio-dacplus
-#dtoverlay=iqaudio-digi-wm8804-audio
-#dtoverlay=justboom-dac
-#dtoverlay=justboom-digi
-#dtoverlay=pisound
-#dtoverlay=raspidac3
-#dtoverlay=rpi-dac
-#dtoverlay=rpi-proto
-#dtoverlay=rra-digidac1-wm8741-audio
projects / openwrt / staging / chunkeey.git / blobdiff