brcm2708: remove linux 4.14 support

[openwrt/staging/chunkeey.git] / target / linux / brcm2708 / patches-4.14 / 950-0316-overlays-Add-gpio-no-irq-overlay.patch

diff --git a/target/linux/brcm2708/patches-4.14/950-0316-overlays-Add-gpio-no-irq-overlay.patch b/target/linux/brcm2708/patches-4.14/950-0316-overlays-Add-gpio-no-irq-overlay.patch
deleted file mode 100644 (file)
index ba0e409..0000000
--- a/target/linux/brcm2708/patches-4.14/950-0316-overlays-Add-gpio-no-irq-overlay.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 174a2e7f83a033252da488edd3072f446f82325d Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 19 Jun 2018 15:04:45 +0100
-Subject: [PATCH 316/454] overlays: Add gpio-no-irq overlay
-
-An overlay to disable all GPIO interrupts.
-
-See: https://github.com/raspberrypi/linux/issues/2550
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/overlays/Makefile                |  1 +
- arch/arm/boot/dts/overlays/README                  |  7 +++++++
- arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts | 14 ++++++++++++++
- 3 files changed, 22 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -35,6 +35,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
-       gpio-ir.dtbo \
-       gpio-ir-tx.dtbo \
-       gpio-key.dtbo \
-+      gpio-no-irq.dtbo \
-       gpio-poweroff.dtbo \
-       gpio-shutdown.dtbo \
-       hifiberry-amp.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -583,6 +583,13 @@ Params: gpio                    GPIO pin
-         keycode                 Set the key code for the button
- 
- 
-+Name:   gpio-no-irq
-+Info:   Use this overlay to disable all GPIO interrupts, which can be useful
-+        for user-space GPIO edge detection systems.
-+Load:   dtoverlay=gpio-no-irq
-+Params: <None>
-+
-+
- Name:   gpio-poweroff
- Info:   Drives a GPIO high or low on poweroff (including halt). Enabling this
-         overlay will prevent the ability to boot by driving GPIO3 low.
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/gpio-no-irq-overlay.dts
-@@ -0,0 +1,14 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+      compatible = "brcm,bcm2835";
-+
-+      fragment@0 {
-+              // Configure the gpio pin controller
-+              target = <&gpio>;
-+              __overlay__ {
-+                          interrupts;
-+              };
-+      };
-+};