brcm2708: update to latest patches from RPi Foundation

[openwrt/staging/chunkeey.git] / target / linux / brcm2708 / patches-4.19 / 950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch b/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch
deleted file mode 100644 (file)
index 4dc4141..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0315-overlays-balenaFin-v1.1.0-carrier-board-update.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From 6cafe647492605d21c2418b6261bf3182b9229f2 Mon Sep 17 00:00:00 2001
-From: Zahari Petkov <zahari@balena.io>
-Date: Fri, 8 Feb 2019 13:03:38 +0200
-Subject: [PATCH] overlays: balenaFin v1.1.0 carrier board update
-
-A backward compatible update for the balenaFin carrier board for the
-Raspberry Pi Compute Module 3/3+ Lite.
-
-The updated overlay includes:
-  * support for the newly introduced RGB LEDs
-  * i2c-gpio and SDIO improvements
-  * DT based Marvell 88W8887 configuration
-
-Signed-off-by: Zahari Petkov <zahari@balena.io>
----
- arch/arm/boot/dts/overlays/README             |  2 +-
- .../boot/dts/overlays/balena-fin-overlay.dts  | 46 ++++++++++++++++++-
- 2 files changed, 45 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -472,7 +472,7 @@ Params: swap_lr                 Reverse
- 
- Name:   balena-fin
- Info:   Overlay that enables WiFi, Bluetooth and the GPIO expander on the
--        Balena Fin board.
-+        balenaFin carrier board for the Raspberry Pi Compute Module 3/3+ Lite.
- Load:   dtoverlay=balena-fin
- Params: <None>
- 
---- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
-@@ -11,6 +11,7 @@
-                       pinctrl-0 = <&sdio_pins>;
-                       bus-width = <4>;
-                       brcm,overclock-50 = <35>;
-+                      non-removable;
-                       status = "okay";
-               };
-       };
-@@ -34,7 +35,8 @@
-       fragment@2 {
-               target-path = "/";
-               __overlay__ {
--                      // We should investigate how to switch to mmc-pwrseq-sd8787
-+                      // We should switch to mmc-pwrseq-sd8787 after making it
-+                      // compatible with sd8887
-                       // Currently that module requires two GPIOs to function since it
-                       // targets a slightly different chip
-                       power_ctrl: power_ctrl {
-@@ -46,10 +48,21 @@
-                       i2c_soft: i2c@0 {
-                               compatible = "i2c-gpio";
-                               gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
--                              i2c-gpio,delay-us = <2>; /* ~100 kHz */
-+                              i2c-gpio,delay-us = <5>;
-+                              i2c-gpio,scl-open-drain;
-+                              i2c-gpio,sda-open-drain;
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                       };
-+
-+                      sd8xxx-wlan {
-+                              drvdbg = <0x6>;
-+                              drv_mode = <0x1>;
-+                              cfg80211_wext = <0xf>;
-+                              sta_name = "wlan";
-+                              wfd_name = "p2p";
-+                              cal_data_cfg = "none";
-+                      };
-               };
-       };
- 
-@@ -74,6 +87,35 @@
-                               reg = <0x68>;
-                               status = "okay";
-                       };
-+
-+                      // RGB LEDs (>= v1.1.0)
-+                      pca9633: pca9633@62 {
-+                              compatible = "nxp,pca9633";
-+                              reg = <0x62>;
-+                              #address-cells = <1>;
-+                              #size-cells = <0>;
-+
-+                              red@0 {
-+                                      label = "red";
-+                                      reg = <0>;
-+                                      linux,default-trigger = "none";
-+                              };
-+                              green@1 {
-+                                      label = "green";
-+                                      reg = <1>;
-+                                      linux,default-trigger = "none";
-+                              };
-+                              blue@2 {
-+                                      label = "blue";
-+                                      reg = <2>;
-+                                      linux,default-trigger = "none";
-+                              };
-+                              unused@3 {
-+                                      label = "unused";
-+                                      reg = <3>;
-+                                      linux,default-trigger = "none";
-+                              };
-+                      };
-               };
-       };
- };