brcm63xx: be more specific about SOC names
[openwrt/staging/chunkeey.git] / target / linux / brcm63xx / dts / bcm63168-sky-sr102.dts
diff --git a/target/linux/brcm63xx/dts/bcm63168-sky-sr102.dts b/target/linux/brcm63xx/dts/bcm63168-sky-sr102.dts
new file mode 100644 (file)
index 0000000..e47822a
--- /dev/null
@@ -0,0 +1,118 @@
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "SKY SR102";
+       compatible = "sky,sr102", "brcm,bcm63168", "brcm,bcm63268";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 33 0>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               lan1_green {
+                       label = "SR102:green:lan1";
+                       gpios = <&pinctrl 1 1>;
+               };
+               power_red {
+                       label = "SR102:red:power";
+                       gpios = <&pinctrl 2 1>;
+               };
+               wifi_red {
+                       label = "SR102:red:wifi";
+                       gpios = <&pinctrl 3 1>;
+               };
+               inet_red {
+                       label = "SR102:red:inet";
+                       gpios = <&pinctrl 4 1>;
+               };
+               inet_white {
+                       label = "SR102:white:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_white {
+                       label = "SR102:white:power";
+                       gpios = <&pinctrl 6 0>;
+                       default-state = "on";
+               };
+               wifi_white {
+                       label = "SR102:white:wifi";
+                       gpios = <&pinctrl 8 0>;
+               };
+               lan2_red {
+                       label = "SR102:red:lan2";
+                       gpios = <&pinctrl 9 1>;
+               };
+               lan3_red {
+                       label = "SR102:red:lan3";
+                       gpios = <&pinctrl 10 1>;
+               };
+               lan4_red {
+                       label = "SR102:red:lan4";
+                       gpios = <&pinctrl 11 1>;
+               };
+               lan1_red {
+                       label = "SR102:red:lan1";
+                       gpios = <&pinctrl 12 1>;
+               };
+               lan2_green {
+                       label = "SR102:green:lan2";
+                       gpios = <&pinctrl 13 0>;
+               };
+               lan3_green {
+                       label = "SR102:green:lan3";
+                       gpios = <&pinctrl 14 1>;
+               };
+               lan4_green {
+                       label = "SR102:green:lan4";
+                       gpios = <&pinctrl 15 1>;
+               };
+               hd_white {
+                       label = "SR102:white:hd";
+                       gpios = <&pinctrl 18 0>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};