brcm63xx: use more systematic names for image and DTS files

[openwrt/staging/chunkeey.git] / target / linux / brcm63xx / dts / bcm6328-sercomm-ad1018-nor.dts

diff --git a/target/linux/brcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts b/target/linux/brcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts
new file mode 100644 (file)
index 0000000..36899a4
--- /dev/null
+++ b/target/linux/brcm63xx/dts/bcm6328-sercomm-ad1018-nor.dts
@@ -0,0 +1,146 @@
+/dts-v1/;
+
+#include "bcm6328.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Sercomm AD1018 (SPI flash mod)";
+       compatible = "sercomm,ad1018-nor", "brcm,bcm6328";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 24 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&pinctrl 25 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 31 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl_leds: leds {
+               function = "led";
+               pins = "gpio0", "gpio1";
+       };
+};
+
+&leds {
+       status = "ok";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led
+                    &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led
+                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+
+       brcm,serial-leds;
+       brcm,serial-shift-inv;
+       brcm,serial-dat-low;
+
+       inet_red@0 {
+               reg = <0>;
+               active-low;
+               label = "AD1018:red:internet";
+       };
+
+       inet_green@1 {
+               reg = <1>;
+               active-low;
+               label = "AD1018:green:internet";
+       };
+
+       power_green@8 {
+               reg = <8>;
+               active-low;
+               label = "AD1018:green:power";
+               default-state = "on";
+       };
+
+       adsl_green@10 {
+               reg = <10>;
+               active-low;
+               label = "AD1018:green:adsl";
+       };
+
+       adsl_red@11 {
+               reg = <11>;
+               active-low;
+               label = "AD1018:red:adsl";
+       };
+
+       phone_green@12 {
+               reg = <12>;
+               active-low;
+               label = "AD1018:green:phone";
+       };
+
+       wps_green@13 {
+               reg = <13>;
+               active-low;
+               label = "AD1018:green:wps";
+       };
+
+       wifi_green@14 {
+               reg = <14>;
+               active-low;
+               label = "AD1018:green:wifi";
+       };
+
+       usb_green@15 {
+               reg = <15>;
+               active-low;
+               label = "AD1018:green:usb";
+       };
+
+       ephy0_spd@17 {
+               reg = <17>;
+               brcm,hardware-controlled;
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partitions {
+                       compatible = "brcm,bcm963xx-cfe-nor-partitions";
+               };
+       };
+};
+
+&uart0 {
+       status = "ok";
+};