brcm63xx: be more specific about SOC names

[openwrt/staging/chunkeey.git] / target / linux / brcm63xx / dts / bcm6369-comtrend-wap-5813n.dts

diff --git a/target/linux/brcm63xx/dts/bcm6369-comtrend-wap-5813n.dts b/target/linux/brcm63xx/dts/bcm6369-comtrend-wap-5813n.dts
new file mode 100644 (file)
index 0000000..c6db272
--- /dev/null
+++ b/target/linux/brcm63xx/dts/bcm6369-comtrend-wap-5813n.dts
@@ -0,0 +1,157 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend WAP-5813n";
+       compatible = "comtrend,wap-5813n", "brcm,bcm6369", "brcm,bcm6368";
+
+       chosen {
+               bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               wlan {
+                       label = "wlan";
+                       gpios = <&pinctrl 32 1>;
+                       linux,code = <KEY_WLAN>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 34 1>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 35 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               inet_green {
+                       label = "WAP-5813n:green:inet";
+                       gpios = <&pinctrl 5 0>;
+               };
+               power_green {
+                       label = "WAP-5813n:green:power";
+                       gpios = <&pinctrl 22 0>;
+                       default-state = "on";
+               };
+               wps_green {
+                       label = "WAP-5813n:green:wps";
+                       gpios = <&pinctrl 23 1>;
+               };
+               power_red {
+                       label = "WAP-5813n:red:power";
+                       gpios = <&pinctrl 24 0>;
+               };
+               inet_red {
+                       label = "WAP-5813n:red:inet";
+                       gpios = <&pinctrl 31 0>;
+               };
+       };
+};
+
+&pflash {
+       status = "ok";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               cfe@0 {
+                       label = "CFE";
+                       reg = <0x000000 0x010000>;
+                       read-only;
+               };
+
+               linux@10000 {
+                       label = "linux";
+                       reg = <0x010000 0x7e0000>;
+                       compatible = "brcm,bcm963xx-imagetag";
+               };
+
+               nvram@7f0000 {
+                       label = "nvram";
+                       reg = <0x7f0000 0x010000>;
+               };
+       };
+};
+
+&lsspi {
+       switch@0 {
+               compatible = "brcm,bcm53115";
+               reg = <0>;
+               spi-max-frequency = <781000>;
+
+               lede,alias = "eth0";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       lan@0 {
+                               reg = <0>;
+                               label = "lan4";
+                       };
+
+                       lan@1 {
+                               reg = <1>;
+                               label = "lan3";
+                       };
+
+                       lan@2 {
+                               reg = <2>;
+                               label = "lan2";
+                       };
+
+                       lan@3 {
+                               reg = <3>;
+                               label = "lan1";
+                       };
+
+                       wan@4 {
+                               reg = <4>;
+                               label = "wan";
+                       };
+
+                       cpu@5 {
+                               reg = <5>;
+                               label = "cpu";
+
+                               fixed-link {
+                                       speed = <1000>;
+                                       full-duplex;
+                                       asym-pause;
+                                       pause;
+                               };
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pci>;
+};
+
+&uart0 {
+       status = "ok";
+};