brcm63xx: add linux 4.19 support

[openwrt/staging/chunkeey.git] / target / linux / brcm63xx / patches-4.19 / 580-board_AD1018.patch

diff --git a/target/linux/brcm63xx/patches-4.19/580-board_AD1018.patch b/target/linux/brcm63xx/patches-4.19/580-board_AD1018.patch
new file mode 100644 (file)
index 0000000..6d12c61
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.19/580-board_AD1018.patch
@@ -0,0 +1,92 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -357,6 +357,73 @@ static struct board_info __initdata boar
+       },
+ };
+ 
++static struct sprom_fixup __initdata ad1018_fixups[] = {
++      { .offset = 6, .value = 0x1c00 },
++      { .offset = 65, .value = 0x1256 },
++      { .offset = 96, .value = 0x2046 },
++      { .offset = 97, .value = 0xfe69 },
++      { .offset = 98, .value = 0x1726 },
++      { .offset = 99, .value = 0xfa5c },
++      { .offset = 112, .value = 0x2046 },
++      { .offset = 113, .value = 0xfea8 },
++      { .offset = 114, .value = 0x1978 },
++      { .offset = 115, .value = 0xfa26 },
++      { .offset = 161, .value = 0x2222 },
++      { .offset = 169, .value = 0x2222 },
++      { .offset = 171, .value = 0x2222 },
++      { .offset = 173, .value = 0x2222 },
++      { .offset = 174, .value = 0x4444 },
++      { .offset = 175, .value = 0x2222 },
++      { .offset = 176, .value = 0x4444 },
++};
++
++static struct board_info __initdata board_AD1018 = {
++      .name                                   = "96328avngr",
++      .expected_cpu_id                        = 0x6328,
++
++      .has_pci                                = 1,
++      .use_fallback_sprom                     = 1,
++
++      .has_ohci0                              = 1,
++      .has_ehci0                              = 1,
++      .num_usbh_ports                         = 1,
++
++      .has_enetsw                             = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used           = 1,
++                              .phy_id         = 1,
++                              .name           = "FIBRE",
++                      },
++                      [1] = {
++                              .used           = 1,
++                              .phy_id         = 2,
++                              .name           = "LAN3",
++                      },
++                      [2] = {
++                              .used           = 1,
++                              .phy_id         = 3,
++                              .name           = "LAN2",
++                      },
++                      [3] = {
++                              .used           = 1,
++                              .phy_id         = 4,
++                              .name           = "LAN1",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ad1018_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ad1018_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata ar5381u_fixups[] = {
+       { .offset = 97, .value = 0xfee5 },
+       { .offset = 98, .value = 0x157c },
+@@ -2605,6 +2672,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+       &board_96328avng,
++      &board_AD1018,
+       &board_AR5381u,
+       &board_AR5387un,
+       &board_963281TAN,
+@@ -2719,6 +2787,7 @@ static struct of_device_id const bcm963x
+       { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
+       { .compatible = "nucom,r5010unv2", .data = &board_R5010UNV2, },
+       { .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, },
++      { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+       { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, },