ipq40xx: add support for Linksys WHW01 v1

[openwrt/staging/chunkeey.git] / target / linux / ipq40xx / base-files / etc / board.d / 02_network

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
old mode 100755 (executable)
new mode 100644 (file)
index 44cb9f9..39450a5
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (c) 2015 The Linux Foundation. All rights reserved.
 # Copyright (c) 2011-2015 OpenWrt.org
@@ -15,21 +14,53 @@ ipq40xx_setup_interfaces()
        8dev,habanero-dvk|\
        8dev,jalapeno|\
        alfa-network,ap120c-ac|\
-       engenius,ens620ext)
+       engenius,emr3500|\
+       engenius,ens620ext|\
+       luma,wrtq-329acn|\
+       netgear,wac510|\
+       plasmacloud,pa1200|\
+       plasmacloud,pa2200)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ;;
-       aruba,ap-303h)
+       aruba,ap-303|\
+       aruba,ap-365|\
+       avm,fritzrepeater-1200|\
+       dlink,dap-2610 |\
+       engenius,eap1300|\
+       engenius,emd1|\
+       meraki,mr33|\
+       mikrotik,lhgg-60ad|\
+       mikrotik,sxtsq-5-ac|\
+       netgear,ex6100v2|\
+       netgear,ex6150v2|\
+       zyxel,wre6606)
+               ucidef_set_interface_lan "eth0"
+               ;;
+       aruba,ap-303h|\
+       teltonika,rutx10)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
                        "0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
                ;;
        asus,map-ac2200|\
        cilab,meshpoint-one|\
+       edgecore,ecw5211|\
+       edgecore,oap100|\
+       google,wifi|\
        openmesh,a42|\
        openmesh,a62)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
+       mikrotik,cap-ac)
+               ucidef_add_switch "switch0" \
+                       "0t@eth0" "4:lan" "5:wan"
+               ;;
+       asus,rt-ac42u|\
        asus,rt-ac58u|\
+       mikrotik,hap-ac2|\
+       mikrotik,hap-ac3|\
+       p2w,r619ac-64m|\
+       p2w,r619ac-128m|\
        zyxel,nbg6617)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
@@ -42,48 +73,85 @@ ipq40xx_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
                ;;
-       avm,fritzbox-7530)
+       linksys,mr8300)
+               ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
-                       "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+                       "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
                ;;
-       aruba,ap-303|\
-       avm,fritzrepeater-1200|\
-       dlink,dap-2610 |\
-       engenius,eap1300|\
-       engenius,emd1|\
-       meraki,mr33|\
-       netgear,ex6100v2|\
-       netgear,ex6150v2|\
-       zyxel,wre6606)
-               ucidef_set_interface_lan "eth0"
+       avm,fritzbox-7530)
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
                ;;
        avm,fritzrepeater-3000|\
+       linksys,whw01-v1)
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "4:lan:1" "5:lan:2"
+               ;;
        compex,wpj419|\
        compex,wpj428|\
        engenius,eap2200)
                ucidef_set_interface_lan "eth0 eth1"
                ;;
+       buffalo,wtr-m2133hp)
+               ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+               ;;
+       cellc,rtl30vw)
+               ucidef_set_interface_lan "eth0"
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "3:lan" "4:lan"
+               ;;
+       devolo,magic-2-wifi-next)
+               ucidef_set_interface_lan "eth0 eth1 eth2"
+               ;;
        ezviz,cs-w3-wd1200g-eup)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
                        "0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
                ;;
-       glinet,gl-b1300)
+       glinet,gl-ap1300 |\
+       glinet,gl-b1300 |\
+       glinet,gl-s1300)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
                        "0u@eth0" "3:lan" "4:lan"
                ;;
+       glinet,gl-b2200)
+               ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "1:lan" "2:lan" "3:lan" "5:lan" "0u@eth1" "4:wan"
+               ;;
+       mobipromo,cm520-79f)
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "3:lan:2" "4:lan:1"
+               ucidef_set_interface_wan "eth1"
+               ;;
+       netgear,rbr50|\
+       netgear,rbs50|\
+       netgear,srr60|\
+       netgear,srs60)
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "2:lan" "3:lan" "4:lan"
+               ucidef_set_interface_wan "eth1"
+               ;;
        qxwlan,e2600ac-c1 |\
        qxwlan,e2600ac-c2)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
                        "0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
                ;;
-       unielec,u4019-32m)
+       unielec,u4019-32m |\
+       tel,x1pro)
                ucidef_set_interfaces_lan_wan "eth0" "eth1"
                ucidef_add_switch "switch0" \
                        "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
                ;;
+       zte,mf286d)
+               ucidef_set_interfaces_lan_wan "eth0" "eth1"
+               ucidef_add_switch "switch0" \
+                       "0u@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "0u@eth1" "5:wan"
+               ;;
        *)
                echo "Unsupported hardware. Network interfaces not initialized"
                ;;
@@ -102,7 +170,6 @@ ipq40xx_setup_macs()
                label_mac=$(mtd_get_mac_binary "ART" 0x1006)
                ;;
        asus,rt-ac58u)
-               CI_UBIPART=UBI_DEV
                wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
                lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
                label_mac=$wan_mac
@@ -110,6 +177,10 @@ ipq40xx_setup_macs()
        cilab,meshpoint-one)
                label_mac=$(mtd_get_mac_binary "ART" 0x1006)
                ;;
+       devolo,magic-2-wifi-next)
+               lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
+               label_mac=$lan_mac
+               ;;
        dlink,dap-2610)
                lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
                label_mac=$lan_mac
@@ -119,6 +190,11 @@ ipq40xx_setup_macs()
                lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
                label_mac=$lan_mac
                ;;
+       engenius,emr3500)
+               wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
+               lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+               label_mac=$wan_mac
+               ;;
        engenius,ens620ext)
                wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                lan_mac=$(macaddr_add "$wan_mac" 1)
@@ -130,6 +206,18 @@ ipq40xx_setup_macs()
                wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
                lan_mac=$(macaddr_add "$wan_mac" 1)
                ;;
+       mikrotik,cap-ac |\
+       mikrotik,hap-ac2|\
+       mikrotik,hap-ac3)
+               wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+               lan_mac=$(macaddr_add $wan_mac 1)
+               label_mac="$wan_mac"
+               ;;
+       mikrotik,lhgg-60ad|\
+       mikrotik,sxtsq-5-ac)
+               lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+               label_mac="$lan_mac"
+               ;;
        esac
 
        [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac