mediatek: drop v4.14 support

[openwrt/staging/chunkeey.git] / target / linux / mediatek / patches-4.14 / 0114-dt-bindings-usb-mtu3-remove-dummy-clocks-and-add-opt.patch

diff --git a/target/linux/mediatek/patches-4.14/0114-dt-bindings-usb-mtu3-remove-dummy-clocks-and-add-opt.patch b/target/linux/mediatek/patches-4.14/0114-dt-bindings-usb-mtu3-remove-dummy-clocks-and-add-opt.patch
deleted file mode 100644 (file)
index c52de97..0000000
--- a/target/linux/mediatek/patches-4.14/0114-dt-bindings-usb-mtu3-remove-dummy-clocks-and-add-opt.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 2c90367440a0dbf9962e7a7f701b0e7a320d325a Mon Sep 17 00:00:00 2001
-From: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Date: Fri, 13 Oct 2017 17:10:48 +0800
-Subject: [PATCH 114/224] dt-bindings: usb: mtu3: remove dummy clocks and add
- optional ones
-
-Remove dummy clocks for usb wakeup and add optional ones for
-mcu_bus and dma_bus bus.
-
-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 10 ++++------
- 1 file changed, 4 insertions(+), 6 deletions(-)
-
---- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
-@@ -14,9 +14,9 @@ Required properties:
-  - vusb33-supply : regulator of USB avdd3.3v
-  - clocks : a list of phandle + clock-specifier pairs, one for each
-       entry in clock-names
-- - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller;
--      "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are
--      depends on "mediatek,enable-wakeup"
-+ - clock-names : must contain "sys_ck" for clock of controller,
-+      the following clocks are optional:
-+      "ref_ck", "mcu_ck" and "dam_ck";
-  - phys : a list of phandle + phy specifier pairs
-  - dr_mode : should be one of "host", "peripheral" or "otg",
-       refer to usb/generic.txt
-@@ -65,9 +65,7 @@ ssusb: usb@11271000 {
-       clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
-                <&pericfg CLK_PERI_USB0>,
-                <&pericfg CLK_PERI_USB1>;
--      clock-names = "sys_ck", "ref_ck",
--                    "wakeup_deb_p0",
--                    "wakeup_deb_p1";
-+      clock-names = "sys_ck", "ref_ck";
-       vusb33-supply = <&mt6397_vusb_reg>;
-       vbus-supply = <&usb_p0_vbus>;
-       extcon = <&extcon_usb>;