X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fchunkeey.git;a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Far9344_meraki_z1.dts;fp=target%2Flinux%2Fath79%2Fdts%2Far9344_meraki_z1.dts;h=3a7fabdac0e1bbe436a536bbb9b049ce435fe862;hp=0000000000000000000000000000000000000000;hb=92fc0e6063e30ef7202c20e276a123bf8684214a;hpb=84e114c79e1f84f2d0528203efe4d878760c82bb

diff --git a/target/linux/ath79/dts/ar9344_meraki_z1.dts b/target/linux/ath79/dts/ar9344_meraki_z1.dts
new file mode 100644
index 0000000000..3a7fabdac0
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_meraki_z1.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "meraki,z1", "qca,ar9344";
+	model = "Cisco Meraki Z1";
+
+	aliases {
+		led-boot = &led_power_orange;
+		led-failsafe = &led_power_orange;
+		led-upgrade = &led_power_orange;
+		label-mac-device = &eth0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "Reset button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_power_orange: power_orange {
+			label = "orange:power";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <40000000>;
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&jtag_disable_pins>;
+
+	gpio_ext_lna0 {
+		gpio-hog;
+		gpios = <18 0>;
+		output-low;
+		line-name = "z1:ext:lna0";
+	};
+
+	gpio_ext_lna1 {
+		gpio-hog;
+		gpios = <19 0>;
+		output-low;
+		line-name = "z1:ext:lna1";
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+
+	ath9k: wifi@0,0 {
+		compatible = "pci168c,002a"; /* check the pciid - AR9283 */
+		reg = <0x0000 0 0 0 0>;
+		qca,no-eeprom;
+	};
+};
+
+&wmac {
+	status = "okay";
+};
+
+&nand {
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "loader1";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+
+		partition@20000 {
+			label = "kernel";
+			reg = <0x20000 0x7e0000>;
+		};
+
+		partition@800000 {
+			label = "loader2";
+			reg = <0x800000 0x20000>;
+			read-only;
+		};
+
+		partition@820000 {
+			label = "recovery";
+			reg = <0x820000 0x7e0000>;
+		};
+
+		partition@1000000 {
+			label = "ubi";
+			reg = <0x1000000 0x6fe0000>;
+		};
+
+		partition@7fe0000 {
+			label = "origcaldata";
+			reg = <0x7fe0000 0x20000>;
+			read-only;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+
+#if 0
+		/* dummy values */
+		qca,ar8327-initvals = <
+			0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+			0x7c 0x0000007e /* PORT0_STATUS */
+			>;
+#endif
+	};
+};
+
+&eth0 {
+	status = "okay";
+
+	pll-data = <0x06000000 0x00000101 0x00001313>;
+	phy-mode = "rgmii-id";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	gmac-config {
+		device = <&gmac>;
+		rgmii-gmac0 = <1>;
+		switch-only-mode = <1>;
+	};
+};