X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fstaging%2Fchunkeey.git;a=blobdiff_plain;f=target%2Flinux%2Fbcm27xx%2Fpatches-5.10%2F950-0536-overlays-ghost-amp-Add-DAC-mute-control.patch;fp=target%2Flinux%2Fbcm27xx%2Fpatches-5.10%2F950-0536-overlays-ghost-amp-Add-DAC-mute-control.patch;h=0000000000000000000000000000000000000000;hp=0a7187623b3e07e2bab695265556d91a3f37c849;hb=d5c4f24b2af991df2ec24df1a3f906049370f59f;hpb=99ad84b6d9727a63f99a16e0b8386747262e3433

diff --git a/target/linux/bcm27xx/patches-5.10/950-0536-overlays-ghost-amp-Add-DAC-mute-control.patch b/target/linux/bcm27xx/patches-5.10/950-0536-overlays-ghost-amp-Add-DAC-mute-control.patch
deleted file mode 100644
index 0a7187623b..0000000000
--- a/target/linux/bcm27xx/patches-5.10/950-0536-overlays-ghost-amp-Add-DAC-mute-control.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From e56470876bda3751a1926aa5876495e3678e363f Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.com>
-Date: Fri, 16 Apr 2021 09:31:17 +0100
-Subject: [PATCH] overlays: ghost-amp: Add DAC mute control
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.com>
----
- .../boot/dts/overlays/ghost-amp-overlay.dts   | 28 +++++++++++--------
- 1 file changed, 17 insertions(+), 11 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/ghost-amp-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/ghost-amp-overlay.dts
-@@ -4,10 +4,11 @@
- 
- #include <dt-bindings/gpio/gpio-fsm.h>
- 
--#define ENABLE GF_SW(0)
--#define FAULT  GF_IP(0) // GPIO5
--#define RELAY1 GF_OP(0) // GPIO22
--#define RELAY2 GF_OP(1) // GPIO23
-+#define ENABLE   GF_SW(0)
-+#define FAULT    GF_IP(0) // GPIO5
-+#define RELAY1   GF_OP(0) // GPIO22
-+#define RELAY2   GF_OP(1) // GPIO23
-+#define RELAYSSR GF_OP(2) // GPIO24
- 
- / {
- 	compatible = "brcm,bcm2835";
-@@ -64,14 +65,16 @@
- 				gpio-line-names = "enable";
- 				input-gpios  = <&gpio 5 1>;  // FAULT (active low)
- 				output-gpios = <&gpio 22 0>, // RELAY1
--					       <&gpio 23 0>; // RELAY2
-+					       <&gpio 23 0>, // RELAY2
-+					       <&gpio 24 0>; // RELAYSSR
- 				shutdown-timeout-ms = <1000>;
- 
- 				amp_off {
- 					start_state;
- 					shutdown_state;
- 
--					set = <RELAY2 0>,
-+					set = <RELAYSSR 0>,
-+					      <RELAY2 0>,
- 					      <RELAY1 0>;
- 					amp_on_1 = <ENABLE 1>;
- 					fault = <FAULT 1>;
-@@ -85,12 +88,14 @@
- 				};
- 
- 				amp_on {
--					set = <RELAY2 1>;
-+					set = <RELAY2 1>,
-+					      <RELAYSSR 1>;
- 					amp_on_wait = <ENABLE 0>;
- 					fault = <FAULT 1>;
- 				};
- 
- 				amp_on_wait {
-+					set = <RELAYSSR 0>;
- 					amp_off_1 = <GF_DELAY (30*60*1000)>,
- 						    <GF_SHUTDOWN 0>;
- 					amp_on = <ENABLE 1>;
-@@ -107,7 +112,8 @@
- 				// Keep this a distinct state to prevent
- 				// changes and for the diagnostic output
- 				fault {
--					set = <RELAY2 0>,
-+					set = <RELAYSSR 0>,
-+					      <RELAY2 0>,
- 					      <RELAY1 0>;
- 					amp_off = <FAULT 0>;
- 					shutdown_state;
-@@ -120,9 +126,9 @@
- 		target = <&gpio>;
- 		__overlay__ {
- 			ghost_amp_pins: ghost_amp_pins {
--				brcm,pins = <5 22 23>;
--				brcm,function = <0 1 1>; /* in out out */
--				brcm,pull = <2 0 0>; /* up none none */
-+				brcm,pins = <5 22 23 24>;
-+				brcm,function = <0 1 1 1>; /* in out out out */
-+				brcm,pull = <2 0 0 0>; /* up none none none */
- 			};
- 		};
- 	};