move old kamikaze out of trunk - will put buildroot-ng in there as soon as all the...
[openwrt/staging/dedeckeh.git] / openwrt / target / linux / brcm-2.4 / patches / 009-wrt54g3g_pcmcia.patch
diff --git a/openwrt/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch b/openwrt/target/linux/brcm-2.4/patches/009-wrt54g3g_pcmcia.patch
deleted file mode 100644 (file)
index 0759eeb..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
-diff -urN linux.old/arch/mips/bcm947xx/pcibios.c linux.dev/arch/mips/bcm947xx/pcibios.c
---- linux.old/arch/mips/bcm947xx/pcibios.c     2006-04-07 21:20:59.000000000 +0200
-+++ linux.dev/arch/mips/bcm947xx/pcibios.c     2006-04-08 03:17:59.000000000 +0200
-@@ -157,6 +157,7 @@
- static u32 pci_iobase = 0x100;
- static u32 pci_membase = SB_PCI_DMA;
-+static u32 pcmcia_membase = 0x40004000;
- void __init
- pcibios_fixup_bus(struct pci_bus *b)
-@@ -188,7 +189,7 @@
-                       /* Fix up resource bases */
-                       for (pos = 0; pos < 6; pos++) {
-                               res = &d->resource[pos];
--                              base = (res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase;
-+                              base = (res->flags & IORESOURCE_IO) ? &pci_iobase : ((b->number == 2) ? &pcmcia_membase : &pci_membase);
-                               if (res->end) {
-                                       size = res->end - res->start + 1;
-                                       if (*base & (size - 1))
-@@ -308,7 +309,12 @@
-       where = PCI_BASE_ADDRESS_0 + (resource * 4);
-       size = res->end - res->start;
-       pci_read_config_dword(dev, where, &reg);
--      reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
-+      
-+      if (dev->bus->number == 1)
-+              reg = (reg & size) | (((u32)(res->start - root->start)) & ~size);
-+      else
-+              reg = res->start;
-+
-       pci_write_config_dword(dev, where, reg);
- }
-diff -urN linux.old/drivers/pcmcia/yenta.c linux.dev/drivers/pcmcia/yenta.c
---- linux.old/drivers/pcmcia/yenta.c   2004-11-17 12:54:21.000000000 +0100
-+++ linux.dev/drivers/pcmcia/yenta.c   2006-04-11 17:47:45.000000000 +0200
-@@ -543,6 +543,9 @@
-        * Probe for usable interrupts using the force
-        * register to generate bogus card status events.
-        */
-+
-+#ifndef CONFIG_BCM947XX
-+      /* WRT54G3G does not like this */
-       cb_writel(socket, CB_SOCKET_EVENT, -1);
-       cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
-       exca_writeb(socket, I365_CSCINT, 0);
-@@ -557,7 +560,8 @@
-       }
-       cb_writel(socket, CB_SOCKET_MASK, 0);
-       exca_writeb(socket, I365_CSCINT, 0);
--      
-+#endif
-+
-       mask = probe_irq_mask(val) & 0xffff;
-       bridge_ctrl &= ~CB_BRIDGE_INTR;
-@@ -578,6 +582,12 @@
-       socket->cap.cb_dev = socket->dev;
-       socket->cap.bus = NULL;
-+#ifdef CONFIG_BCM947XX
-+      /* irq mask probing is broken for the WRT54G3G */
-+      if (socket->cap.irq_mask == 0)
-+              socket->cap.irq_mask = 0x6f8;
-+#endif
-+
-       printk(KERN_INFO "Yenta ISA IRQ mask 0x%04x, PCI irq %d\n",
-              socket->cap.irq_mask, socket->cb_irq);
- }
-@@ -609,6 +619,15 @@
-       printk(KERN_INFO "Socket status: %08x\n",
-              cb_readl(socket, CB_SOCKET_STATE));
-+      /* Generate an interrupt on card insert/remove */
-+      config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+      /* Set up Multifunction Routing Status Register */
-+      config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+      
-+      /* Switch interrupts to parallelized */
-+      config_writeb(socket, 0x92, 0x64);
-+      
-       /* Register it with the pcmcia layer.. */
-       cardbus_register(socket);
-@@ -731,7 +750,7 @@
- {
-       struct pci_bus *bus;
-       struct resource *root, *res;
--      u32 start, end;
-+      u32 start = 0, end = 0;
-       u32 align, size, min, max;
-       unsigned offset;
-       unsigned mask;
-@@ -750,6 +769,15 @@
-       res->end = 0;
-       root = pci_find_parent_resource(socket->dev, res);
-+#ifdef CONFIG_BCM947XX
-+      /* default mem resources are completely fscked up on the wrt54g3g */
-+      /* bypass the entire resource allocation stuff below and just set it statically */
-+      if (type & IORESOURCE_MEM) {
-+              res->start = 0x40004000;
-+              res->end = res->start + 0x3fff;
-+      }
-+
-+#else
-       if (!root)
-               return;
-@@ -794,6 +822,7 @@
-               res->start = res->end = 0;
-               return;
-       }
-+#endif
-       config_writel(socket, offset, res->start);
-       config_writel(socket, offset+4, res->end);