move old kamikaze out of trunk - will put buildroot-ng in there as soon as all the...

[openwrt/staging/dedeckeh.git] / openwrt / target / linux / package / base-files / files / brcm-2.4 / etc / init.d / S05netconfig

diff --git a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
deleted file mode 100755 (executable)
index 6a626f5..0000000
--- a/openwrt/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-[ -e /etc/config/network ] && exit 0
-
-mkdir -p /etc/config
-
-(
-       if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
-               # WGT634u
-               echo boardtype=wgt634u
-       else
-               strings /dev/mtdblock/3
-       fi
-) | awk '
-function p(name) {
-       if (c[name] != "") print name "=\"" c[name] "\""
-}
-
-BEGIN {
-       FS="="
-       c["lan_ifname"]="br0"
-       c["lan_ifnames"]="vlan0 eth1"
-       c["wan_proto"]="none"
-       c["wan_ifname"]="vlan1"
-       c["vlan0ports"]="1 2 3 4 5*"
-       c["vlan1ports"]="0 5"
-}
-
-($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
-       nvram[$1] = $2
-}
-
-END {
-       # v1 hardware
-       if (nvram["boardtype"] == "bcm94710dev") {
-               # Linksys WRT54G v1.x
-               if (nvram["boardnum"] == "42") {
-                       c["vlan0ports"]=""
-                       c["vlan1ports"]=""
-                       c["lan_ifnames"]="vlan2 eth2"
-               }
-
-               # Asus WL-500g
-               if (nvram["boardnum"] == "asusX") {
-                       c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
-                       # wan_ifname=eth1
-               }
-       }
-       if (nvram["boardtype"] == "wgt634u") {
-               c["vlan0ports"] = "0 1 2 3 5*"
-               c["vlan1ports"] = "4 5"
-               c["lan_ifnames"] = "vlan0 ath0"
-       }
-       if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
-               c["vlan0ports"] = "0 1 2 3 5*"
-               c["vlan1ports"] = "4 5"
-       }
-
-       # WAP54G
-       if ((nvram["boardnum"] == "2") || \
-               (nvram["boardnum"] == "1024")) {
-               c["lan_ifnames"]="eth0 eth1"
-               c["wan_ifname"]=""
-       }
-
-       print "#### VLAN configuration "
-       print "vlan0hwname=et0"
-       print "vlan1hwname=et0"
-       p("vlan0ports")
-       p("vlan1ports")
-       print ""
-       print ""
-       
-       print "#### LAN configuration"
-       print "lan_proto=\"static\""
-       p("lan_ifname")
-       p("lan_ifnames")
-       print "lan_ipaddr=\"192.168.1.1\""
-       print "lan_netmask=\"255.255.255.0\""
-       print "# lan_dns=\"192.168.1.1\""
-       print "# lan_gateway=\"192.168.1.1\""
-
-       print ""
-       print ""
-
-       print "#### WAN configuration"
-       print "# wan_proto: WAN protocol, available protocols:"
-       print "#   none: disable"
-       print "#   dhcp: DHCP"
-       print "#   static: Static IP"
-       print "#   pppoe: PPP over Ethernet"
-       print "#   pptp: Point-to-Point tunneling Protocol"
-       print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
-       print ""
-       print "wan_proto=dhcp"
-       p("wan_ifname")
-       print "wan_device=\"" c["wan_ifname"] "\""
-       print "# wan_ipaddr=\"192.168.0.2\""
-       print "# wan_netmask=\"255.255.255.0\""
-       print "# wan_gateway=\"192.168.0.1\""
-       print "# wan_dns=\"192.168.0.1\""
-       print ""
-       print "## PPP over Ethernet and PPTP"
-       print "# wan_ifname=\"ppp0\""
-       print "# ppp_username=\"my_username\""
-       print "# ppp_passwd=\"my_password\""
-       print "# pptp_server_ip=\"192.168.0.1\""
-}
-' > /etc/config/network