brcm2708: update to latest patches from RPi Foundation
[openwrt/staging/dedeckeh.git] / target / linux / brcm2708 / patches-4.19 / 950-0078-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch
diff --git a/target/linux/brcm2708/patches-4.19/950-0078-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch b/target/linux/brcm2708/patches-4.19/950-0078-ASoC-Add-driver-for-Cirrus-Logic-Audio-Card.patch
new file mode 100644 (file)
index 0000000..363fd90
--- /dev/null
@@ -0,0 +1,1048 @@
+From 2c3e4f06b7e7d34a03e747367c26805fbf89a4ac Mon Sep 17 00:00:00 2001
+From: Matthias Reichl <hias@horus.com>
+Date: Sun, 22 Jan 2017 12:49:37 +0100
+Subject: [PATCH] ASoC: Add driver for Cirrus Logic Audio Card
+
+Note: due to problems with deferred probing of regulators
+the following softdep should be added to a modprobe.d file
+
+softdep arizona-spi pre: arizona-ldo1
+
+Signed-off-by: Matthias Reichl <hias@horus.com>
+---
+ sound/soc/bcm/rpi-cirrus.c | 1029 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 1029 insertions(+)
+ create mode 100644 sound/soc/bcm/rpi-cirrus.c
+
+--- /dev/null
++++ b/sound/soc/bcm/rpi-cirrus.c
+@@ -0,0 +1,1029 @@
++/*
++ * ASoC machine driver for Cirrus Logic Audio Card
++ * (with WM5102 and WM8804 codecs)
++ *
++ * Copyright 2015-2017 Matthias Reichl <hias@horus.com>
++ *
++ * Based on rpi-cirrus-sound-pi driver (c) Wolfson / Cirrus Logic Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/delay.h>
++#include <sound/pcm_params.h>
++
++#include <linux/mfd/arizona/registers.h>
++
++#include "../codecs/wm5102.h"
++#include "../codecs/wm8804.h"
++
++#define WM8804_CLKOUT_HZ 12000000
++
++#define RPI_CIRRUS_DEFAULT_RATE 44100
++#define WM5102_MAX_SYSCLK_1 49152000 /* max sysclk for 4K family */
++#define WM5102_MAX_SYSCLK_2 45158400 /* max sysclk for 11.025K family */
++
++static inline unsigned int calc_sysclk(unsigned int rate)
++{
++      return (rate % 4000) ? WM5102_MAX_SYSCLK_2 : WM5102_MAX_SYSCLK_1;
++}
++
++enum {
++      DAI_WM5102 = 0,
++      DAI_WM8804,
++};
++
++struct rpi_cirrus_priv {
++      /* mutex for synchronzing FLL1 access with DAPM */
++      struct mutex lock;
++      unsigned int card_rate;
++      int sync_path_enable;
++      int fll1_freq; /* negative means RefClock in spdif rx case */
++
++      /* track hw params/free for substreams */
++      unsigned int params_set;
++      unsigned int min_rate_idx, max_rate_idx;
++      unsigned char iec958_status[4];
++};
++
++/* helper functions */
++static inline struct snd_soc_pcm_runtime *get_wm5102_runtime(
++      struct snd_soc_card *card) {
++      return snd_soc_get_pcm_runtime(card, card->dai_link[DAI_WM5102].name);
++}
++
++static inline struct snd_soc_pcm_runtime *get_wm8804_runtime(
++      struct snd_soc_card *card) {
++      return snd_soc_get_pcm_runtime(card, card->dai_link[DAI_WM8804].name);
++}
++
++
++struct rate_info {
++      unsigned int value;
++      char *text;
++};
++
++static struct rate_info min_rates[] = {
++      {     0, "off"},
++      { 32000, "32kHz"},
++      { 44100, "44.1kHz"}
++};
++
++#define NUM_MIN_RATES ARRAY_SIZE(min_rates)
++
++static int rpi_cirrus_min_rate_info(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_info *uinfo)
++{
++      uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
++      uinfo->count = 1;
++      uinfo->value.enumerated.items = NUM_MIN_RATES;
++
++      if (uinfo->value.enumerated.item >= NUM_MIN_RATES)
++              uinfo->value.enumerated.item = NUM_MIN_RATES - 1;
++      strcpy(uinfo->value.enumerated.name,
++              min_rates[uinfo->value.enumerated.item].text);
++      return 0;
++}
++
++static int rpi_cirrus_min_rate_get(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++
++      ucontrol->value.enumerated.item[0] = priv->min_rate_idx;
++      return 0;
++}
++
++static int rpi_cirrus_min_rate_put(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      int changed = 0;
++
++      if (priv->min_rate_idx != ucontrol->value.enumerated.item[0]) {
++              changed = 1;
++              priv->min_rate_idx = ucontrol->value.enumerated.item[0];
++      }
++
++      return changed;
++}
++
++static struct rate_info max_rates[] = {
++      {     0, "off"},
++      { 48000, "48kHz"},
++      { 96000, "96kHz"}
++};
++
++#define NUM_MAX_RATES ARRAY_SIZE(max_rates)
++
++static int rpi_cirrus_max_rate_info(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_info *uinfo)
++{
++      uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
++      uinfo->count = 1;
++      uinfo->value.enumerated.items = NUM_MAX_RATES;
++      if (uinfo->value.enumerated.item >= NUM_MAX_RATES)
++              uinfo->value.enumerated.item = NUM_MAX_RATES - 1;
++      strcpy(uinfo->value.enumerated.name,
++              max_rates[uinfo->value.enumerated.item].text);
++      return 0;
++}
++
++static int rpi_cirrus_max_rate_get(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++
++      ucontrol->value.enumerated.item[0] = priv->max_rate_idx;
++      return 0;
++}
++
++static int rpi_cirrus_max_rate_put(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      int changed = 0;
++
++      if (priv->max_rate_idx != ucontrol->value.enumerated.item[0]) {
++              changed = 1;
++              priv->max_rate_idx = ucontrol->value.enumerated.item[0];
++      }
++
++      return changed;
++}
++
++static int rpi_cirrus_spdif_info(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_info *uinfo)
++{
++      uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
++      uinfo->count = 1;
++      return 0;
++}
++
++static int rpi_cirrus_spdif_playback_get(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      int i;
++
++      for (i = 0; i < 4; i++)
++              ucontrol->value.iec958.status[i] = priv->iec958_status[i];
++
++      return 0;
++}
++
++static int rpi_cirrus_spdif_playback_put(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct snd_soc_component *wm8804_component =
++              get_wm8804_runtime(card)->codec_dai->component;
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      unsigned char *stat = priv->iec958_status;
++      unsigned char *ctrl_stat = ucontrol->value.iec958.status;
++      unsigned int mask;
++      int i, changed = 0;
++
++      for (i = 0; i < 4; i++) {
++              mask = (i == 3) ? 0x3f : 0xff;
++              if ((ctrl_stat[i] & mask) != (stat[i] & mask)) {
++                      changed = 1;
++                      stat[i] = ctrl_stat[i] & mask;
++                      snd_soc_component_update_bits(wm8804_component,
++                              WM8804_SPDTX1 + i, mask, stat[i]);
++              }
++      }
++
++      return changed;
++}
++
++static int rpi_cirrus_spdif_mask_get(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      ucontrol->value.iec958.status[0] = 0xff;
++      ucontrol->value.iec958.status[1] = 0xff;
++      ucontrol->value.iec958.status[2] = 0xff;
++      ucontrol->value.iec958.status[3] = 0x3f;
++
++      return 0;
++}
++
++static int rpi_cirrus_spdif_capture_get(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct snd_soc_component *wm8804_component =
++              get_wm8804_runtime(card)->codec_dai->component;
++      unsigned int val, mask;
++      int i, ret;
++
++      for (i = 0; i < 4; i++) {
++              ret = snd_soc_component_read(wm8804_component,
++                      WM8804_RXCHAN1 + i, &val);
++              if (ret)
++                      return ret;
++              mask = (i == 3) ? 0x3f : 0xff;
++              ucontrol->value.iec958.status[i] = val & mask;
++      }
++
++      return 0;
++}
++
++#define SPDIF_FLAG_CTRL(desc, reg, bit, invert) \
++{ \
++              .access =  SNDRV_CTL_ELEM_ACCESS_READ \
++                         | SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
++              .iface =   SNDRV_CTL_ELEM_IFACE_MIXER, \
++              .name =    SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) \
++                              desc " Flag", \
++              .info =    snd_ctl_boolean_mono_info, \
++              .get =     rpi_cirrus_spdif_status_flag_get, \
++              .private_value = \
++                      (bit) | ((reg) << 8) | ((invert) << 16) \
++}
++
++static int rpi_cirrus_spdif_status_flag_get(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct snd_soc_component *wm8804_component =
++              get_wm8804_runtime(card)->codec_dai->component;
++
++      unsigned int bit = kcontrol->private_value & 0xff;
++      unsigned int reg = (kcontrol->private_value >> 8) & 0xff;
++      unsigned int invert = (kcontrol->private_value >> 16) & 0xff;
++      int ret;
++      unsigned int val;
++      bool flag;
++
++      ret = snd_soc_component_read(wm8804_component, reg, &val);
++      if (ret)
++              return ret;
++
++      flag = val & (1 << bit);
++
++      ucontrol->value.integer.value[0] = invert ? !flag : flag;
++
++      return 0;
++}
++
++static const char * const recovered_frequency_texts[] = {
++      "176.4/192 kHz",
++      "88.2/96 kHz",
++      "44.1/48 kHz",
++      "32 kHz"
++};
++
++#define NUM_RECOVERED_FREQUENCIES \
++      ARRAY_SIZE(recovered_frequency_texts)
++
++static int rpi_cirrus_recovered_frequency_info(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_info *uinfo)
++{
++      uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
++      uinfo->count = 1;
++      uinfo->value.enumerated.items = NUM_RECOVERED_FREQUENCIES;
++      if (uinfo->value.enumerated.item >= NUM_RECOVERED_FREQUENCIES)
++              uinfo->value.enumerated.item = NUM_RECOVERED_FREQUENCIES - 1;
++      strcpy(uinfo->value.enumerated.name,
++              recovered_frequency_texts[uinfo->value.enumerated.item]);
++      return 0;
++}
++
++static int rpi_cirrus_recovered_frequency_get(struct snd_kcontrol *kcontrol,
++      struct snd_ctl_elem_value *ucontrol)
++{
++      struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
++      struct snd_soc_component *wm8804_component =
++              get_wm8804_runtime(card)->codec_dai->component;
++      unsigned int val;
++      int ret;
++
++      ret = snd_soc_component_read(wm8804_component, WM8804_SPDSTAT, &val);
++      if (ret)
++              return ret;
++
++      ucontrol->value.enumerated.item[0] = (val >> 4) & 0x03;
++      return 0;
++}
++
++static const struct snd_kcontrol_new rpi_cirrus_controls[] = {
++      {
++              .iface =   SNDRV_CTL_ELEM_IFACE_MIXER,
++              .name =    "Min Sample Rate",
++              .info =    rpi_cirrus_min_rate_info,
++              .get =     rpi_cirrus_min_rate_get,
++              .put =     rpi_cirrus_min_rate_put,
++      },
++      {
++              .iface =   SNDRV_CTL_ELEM_IFACE_MIXER,
++              .name =    "Max Sample Rate",
++              .info =    rpi_cirrus_max_rate_info,
++              .get =     rpi_cirrus_max_rate_get,
++              .put =     rpi_cirrus_max_rate_put,
++      },
++      {
++              .iface =   SNDRV_CTL_ELEM_IFACE_MIXER,
++              .name =    SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
++              .info =    rpi_cirrus_spdif_info,
++              .get =     rpi_cirrus_spdif_playback_get,
++              .put =     rpi_cirrus_spdif_playback_put,
++      },
++      {
++              .access =  SNDRV_CTL_ELEM_ACCESS_READ
++                         | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
++              .iface =   SNDRV_CTL_ELEM_IFACE_MIXER,
++              .name =    SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
++              .info =    rpi_cirrus_spdif_info,
++              .get =     rpi_cirrus_spdif_capture_get,
++      },
++      {
++              .access =  SNDRV_CTL_ELEM_ACCESS_READ,
++              .iface =   SNDRV_CTL_ELEM_IFACE_MIXER,
++              .name =    SNDRV_CTL_NAME_IEC958("", PLAYBACK, MASK),
++              .info =    rpi_cirrus_spdif_info,
++              .get =     rpi_cirrus_spdif_mask_get,
++      },
++      {
++              .access =  SNDRV_CTL_ELEM_ACCESS_READ
++                         | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
++              .iface =   SNDRV_CTL_ELEM_IFACE_MIXER,
++              .name =    SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE)
++                              "Recovered Frequency",
++              .info =    rpi_cirrus_recovered_frequency_info,
++              .get =     rpi_cirrus_recovered_frequency_get,
++      },
++      SPDIF_FLAG_CTRL("Audio", WM8804_SPDSTAT, 0, 1),
++      SPDIF_FLAG_CTRL("Non-PCM", WM8804_SPDSTAT, 1, 0),
++      SPDIF_FLAG_CTRL("Copyright", WM8804_SPDSTAT, 2, 1),
++      SPDIF_FLAG_CTRL("De-Emphasis", WM8804_SPDSTAT, 3, 0),
++      SPDIF_FLAG_CTRL("Lock", WM8804_SPDSTAT, 6, 1),
++      SPDIF_FLAG_CTRL("Invalid", WM8804_INTSTAT, 1, 0),
++      SPDIF_FLAG_CTRL("TransErr", WM8804_INTSTAT, 3, 0),
++};
++
++static const char * const linein_micbias_texts[] = {
++      "off", "on",
++};
++
++static SOC_ENUM_SINGLE_VIRT_DECL(linein_micbias_enum,
++      linein_micbias_texts);
++
++static const struct snd_kcontrol_new linein_micbias_mux =
++      SOC_DAPM_ENUM("Route", linein_micbias_enum);
++
++static int rpi_cirrus_spdif_rx_enable_event(struct snd_soc_dapm_widget *w,
++      struct snd_kcontrol *kcontrol, int event);
++
++const struct snd_soc_dapm_widget rpi_cirrus_dapm_widgets[] = {
++      SND_SOC_DAPM_MIC("DMIC", NULL),
++      SND_SOC_DAPM_MIC("Headset Mic", NULL),
++      SND_SOC_DAPM_INPUT("Line Input"),
++      SND_SOC_DAPM_MIC("Line Input with Micbias", NULL),
++      SND_SOC_DAPM_MUX("Line Input Micbias", SND_SOC_NOPM, 0, 0,
++              &linein_micbias_mux),
++      SND_SOC_DAPM_INPUT("dummy SPDIF in"),
++      SND_SOC_DAPM_PGA_E("dummy SPDIFRX", SND_SOC_NOPM, 0, 0, NULL, 0,
++              rpi_cirrus_spdif_rx_enable_event,
++              SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
++      SND_SOC_DAPM_INPUT("Dummy Input"),
++      SND_SOC_DAPM_OUTPUT("Dummy Output"),
++};
++
++const struct snd_soc_dapm_route rpi_cirrus_dapm_routes[] = {
++      { "IN1L", NULL, "Headset Mic" },
++      { "IN1R", NULL, "Headset Mic" },
++      { "Headset Mic", NULL, "MICBIAS1" },
++
++      { "IN2L", NULL, "DMIC" },
++      { "IN2R", NULL, "DMIC" },
++      { "DMIC", NULL, "MICBIAS2" },
++
++      { "IN3L", NULL, "Line Input Micbias" },
++      { "IN3R", NULL, "Line Input Micbias" },
++
++      { "Line Input Micbias", "off", "Line Input" },
++      { "Line Input Micbias", "on", "Line Input with Micbias" },
++
++      /* Make sure MICVDD is enabled, otherwise we get noise */
++      { "Line Input", NULL, "MICVDD" },
++      { "Line Input with Micbias", NULL, "MICBIAS3" },
++
++      /* Dummy routes to check whether SPDIF RX is enabled or not */
++      {"dummy SPDIFRX", NULL, "dummy SPDIF in"},
++      {"AIFTX", NULL, "dummy SPDIFRX"},
++
++      /*
++       * Dummy routes to keep wm5102 from staying off on
++       * playback/capture if all mixers are off.
++       */
++      { "Dummy Output", NULL, "AIF1RX1" },
++      { "Dummy Output", NULL, "AIF1RX2" },
++      { "AIF1TX1", NULL, "Dummy Input" },
++      { "AIF1TX2", NULL, "Dummy Input" },
++};
++
++static int rpi_cirrus_clear_flls(struct snd_soc_card *card,
++      struct snd_soc_component *wm5102_component) {
++
++      int ret1, ret2;
++
++      ret1 = snd_soc_component_set_pll(wm5102_component,
++              WM5102_FLL1, ARIZONA_FLL_SRC_NONE, 0, 0);
++      ret2 = snd_soc_component_set_pll(wm5102_component,
++              WM5102_FLL1_REFCLK, ARIZONA_FLL_SRC_NONE, 0, 0);
++
++      if (ret1) {
++              dev_warn(card->dev,
++                      "setting FLL1 to zero failed: %d\n", ret1);
++              return ret1;
++      }
++      if (ret2) {
++              dev_warn(card->dev,
++                      "setting FLL1_REFCLK to zero failed: %d\n", ret2);
++              return ret2;
++      }
++      return 0;
++}
++
++static int rpi_cirrus_set_fll(struct snd_soc_card *card,
++      struct snd_soc_component *wm5102_component, unsigned int clk_freq)
++{
++      int ret = snd_soc_component_set_pll(wm5102_component,
++              WM5102_FLL1,
++              ARIZONA_CLK_SRC_MCLK1,
++              WM8804_CLKOUT_HZ,
++              clk_freq);
++      if (ret)
++              dev_err(card->dev, "Failed to set FLL1 to %d: %d\n",
++                      clk_freq, ret);
++
++      usleep_range(1000, 2000);
++      return ret;
++}
++
++static int rpi_cirrus_set_fll_refclk(struct snd_soc_card *card,
++      struct snd_soc_component *wm5102_component,
++      unsigned int clk_freq, unsigned int aif2_freq)
++{
++      int ret = snd_soc_component_set_pll(wm5102_component,
++              WM5102_FLL1_REFCLK,
++              ARIZONA_CLK_SRC_MCLK1,
++              WM8804_CLKOUT_HZ,
++              clk_freq);
++      if (ret) {
++              dev_err(card->dev,
++                      "Failed to set FLL1_REFCLK to %d: %d\n",
++                      clk_freq, ret);
++              return ret;
++      }
++
++      ret = snd_soc_component_set_pll(wm5102_component,
++              WM5102_FLL1,
++              ARIZONA_CLK_SRC_AIF2BCLK,
++              aif2_freq, clk_freq);
++      if (ret)
++              dev_err(card->dev,
++                      "Failed to set FLL1 with Sync Clock %d to %d: %d\n",
++                      aif2_freq, clk_freq, ret);
++
++      usleep_range(1000, 2000);
++      return ret;
++}
++
++static int rpi_cirrus_spdif_rx_enable_event(struct snd_soc_dapm_widget *w,
++      struct snd_kcontrol *kcontrol, int event)
++{
++      struct snd_soc_card *card = w->dapm->card;
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      struct snd_soc_component *wm5102_component =
++              get_wm5102_runtime(card)->codec_dai->component;
++
++      unsigned int clk_freq, aif2_freq;
++      int ret = 0;
++
++      switch (event) {
++      case SND_SOC_DAPM_POST_PMU:
++              mutex_lock(&priv->lock);
++
++              /* Enable sync path in case of SPDIF capture use case */
++
++              clk_freq = calc_sysclk(priv->card_rate);
++              aif2_freq = 64 * priv->card_rate;
++
++              dev_dbg(card->dev,
++                      "spdif_rx: changing FLL1 to use Ref Clock clk: %d spdif: %d\n",
++                      clk_freq, aif2_freq);
++
++              ret = rpi_cirrus_clear_flls(card, wm5102_component);
++              if (ret) {
++                      dev_err(card->dev, "spdif_rx: failed to clear FLLs\n");
++                      goto out;
++              }
++
++              ret = rpi_cirrus_set_fll_refclk(card, wm5102_component,
++                      clk_freq, aif2_freq);
++
++              if (ret) {
++                      dev_err(card->dev, "spdif_rx: failed to set FLLs\n");
++                      goto out;
++              }
++
++              /* set to negative to indicate we're doing spdif rx */
++              priv->fll1_freq = -clk_freq;
++              priv->sync_path_enable = 1;
++              break;
++
++      case SND_SOC_DAPM_POST_PMD:
++              mutex_lock(&priv->lock);
++              priv->sync_path_enable = 0;
++              break;
++
++      default:
++              return 0;
++      }
++
++out:
++      mutex_unlock(&priv->lock);
++      return ret;
++}
++
++static int rpi_cirrus_set_bias_level(struct snd_soc_card *card,
++      struct snd_soc_dapm_context *dapm,
++      enum snd_soc_bias_level level)
++{
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card);
++      struct snd_soc_component *wm5102_component =
++              wm5102_runtime->codec_dai->component;
++
++      int ret = 0;
++      unsigned int clk_freq;
++
++      if (dapm->dev != wm5102_runtime->codec_dai->dev)
++              return 0;
++
++      switch (level) {
++      case SND_SOC_BIAS_PREPARE:
++              if (dapm->bias_level == SND_SOC_BIAS_ON)
++                      break;
++
++              mutex_lock(&priv->lock);
++
++              if (!priv->sync_path_enable) {
++                      clk_freq = calc_sysclk(priv->card_rate);
++
++                      dev_dbg(card->dev,
++                              "set_bias: changing FLL1 from %d to %d\n",
++                              priv->fll1_freq, clk_freq);
++
++                      ret = rpi_cirrus_set_fll(card,
++                              wm5102_component, clk_freq);
++                      if (ret)
++                              dev_err(card->dev,
++                                      "set_bias: Failed to set FLL1\n");
++                      else
++                              priv->fll1_freq = clk_freq;
++              }
++              mutex_unlock(&priv->lock);
++              break;
++      default:
++              break;
++      }
++
++      return ret;
++}
++
++static int rpi_cirrus_set_bias_level_post(struct snd_soc_card *card,
++      struct snd_soc_dapm_context *dapm,
++      enum snd_soc_bias_level level)
++{
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card);
++      struct snd_soc_component *wm5102_component =
++              wm5102_runtime->codec_dai->component;
++
++      if (dapm->dev != wm5102_runtime->codec_dai->dev)
++              return 0;
++
++      switch (level) {
++      case SND_SOC_BIAS_STANDBY:
++              mutex_lock(&priv->lock);
++
++              dev_dbg(card->dev,
++                      "set_bias_post: changing FLL1 from %d to off\n",
++                              priv->fll1_freq);
++
++              if (rpi_cirrus_clear_flls(card, wm5102_component))
++                      dev_err(card->dev,
++                              "set_bias_post: failed to clear FLLs\n");
++              else
++                      priv->fll1_freq = 0;
++
++              mutex_unlock(&priv->lock);
++
++              break;
++      default:
++              break;
++      }
++
++      return 0;
++}
++
++static int rpi_cirrus_set_wm8804_pll(struct snd_soc_card *card,
++      struct snd_soc_dai *wm8804_dai, unsigned int rate)
++{
++      int ret;
++
++      /* use 256fs */
++      unsigned int clk_freq = rate * 256;
++
++      ret = snd_soc_dai_set_pll(wm8804_dai, 0, 0,
++              WM8804_CLKOUT_HZ, clk_freq);
++      if (ret) {
++              dev_err(card->dev,
++                      "Failed to set WM8804 PLL to %d: %d\n", clk_freq, ret);
++              return ret;
++      }
++
++      /* Set MCLK as PLL Output */
++      ret = snd_soc_dai_set_sysclk(wm8804_dai,
++              WM8804_TX_CLKSRC_PLL, clk_freq, 0);
++      if (ret) {
++              dev_err(card->dev,
++                      "Failed to set MCLK as PLL Output: %d\n", ret);
++              return ret;
++      }
++
++      return ret;
++}
++
++static int rpi_cirrus_startup(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_card *card = rtd->card;
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      unsigned int min_rate = min_rates[priv->min_rate_idx].value;
++      unsigned int max_rate = max_rates[priv->max_rate_idx].value;
++
++      if (min_rate || max_rate) {
++              if (max_rate == 0)
++                      max_rate = UINT_MAX;
++
++              dev_dbg(card->dev,
++                      "startup: limiting rate to %u-%u\n",
++                      min_rate, max_rate);
++
++              snd_pcm_hw_constraint_minmax(substream->runtime,
++                      SNDRV_PCM_HW_PARAM_RATE, min_rate, max_rate);
++      }
++
++      return 0;
++}
++
++static struct snd_soc_pcm_stream rpi_cirrus_dai_link2_params = {
++      .formats = SNDRV_PCM_FMTBIT_S24_LE,
++      .channels_min = 2,
++      .channels_max = 2,
++      .rate_min = RPI_CIRRUS_DEFAULT_RATE,
++      .rate_max = RPI_CIRRUS_DEFAULT_RATE,
++};
++
++static int rpi_cirrus_hw_params(struct snd_pcm_substream *substream,
++      struct snd_pcm_hw_params *params)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_card *card = rtd->card;
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      struct snd_soc_dai *bcm_i2s_dai = rtd->cpu_dai;
++      struct snd_soc_component *wm5102_component = rtd->codec_dai->component;
++      struct snd_soc_dai *wm8804_dai = get_wm8804_runtime(card)->codec_dai;
++
++      int ret;
++
++      unsigned int width = snd_pcm_format_physical_width(
++              params_format(params));
++      unsigned int rate = params_rate(params);
++      unsigned int clk_freq = calc_sysclk(rate);
++
++      mutex_lock(&priv->lock);
++
++      dev_dbg(card->dev, "hw_params: setting rate to %d\n", rate);
++
++      ret = snd_soc_dai_set_bclk_ratio(bcm_i2s_dai, 2 * width);
++      if (ret) {
++              dev_err(card->dev, "set_bclk_ratio failed: %d\n", ret);
++              goto out;
++      }
++
++      ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0x03, 0x03, 2, width);
++      if (ret) {
++              dev_err(card->dev, "set_tdm_slot failed: %d\n", ret);
++              goto out;
++      }
++
++      /* WM8804 supports sample rates from 32k only */
++      if (rate >= 32000) {
++              ret = rpi_cirrus_set_wm8804_pll(card, wm8804_dai, rate);
++              if (ret)
++                      goto out;
++      }
++
++      ret = snd_soc_component_set_sysclk(wm5102_component,
++              ARIZONA_CLK_SYSCLK,
++              ARIZONA_CLK_SRC_FLL1,
++              clk_freq,
++              SND_SOC_CLOCK_IN);
++      if (ret) {
++              dev_err(card->dev, "Failed to set SYSCLK: %d\n", ret);
++              goto out;
++      }
++
++      if ((priv->fll1_freq > 0) && (priv->fll1_freq != clk_freq)) {
++              dev_dbg(card->dev,
++                      "hw_params: changing FLL1 from %d to %d\n",
++                      priv->fll1_freq, clk_freq);
++
++              if (rpi_cirrus_clear_flls(card, wm5102_component)) {
++                      dev_err(card->dev, "hw_params: failed to clear FLLs\n");
++                      goto out;
++              }
++
++              if (rpi_cirrus_set_fll(card, wm5102_component, clk_freq)) {
++                      dev_err(card->dev, "hw_params: failed to set FLL\n");
++                      goto out;
++              }
++
++              priv->fll1_freq = clk_freq;
++      }
++
++      priv->card_rate = rate;
++      rpi_cirrus_dai_link2_params.rate_min = rate;
++      rpi_cirrus_dai_link2_params.rate_max = rate;
++
++      priv->params_set |= 1 << substream->stream;
++
++out:
++      mutex_unlock(&priv->lock);
++
++      return ret;
++}
++
++static int rpi_cirrus_hw_free(struct snd_pcm_substream *substream)
++{
++      struct snd_soc_pcm_runtime *rtd = substream->private_data;
++      struct snd_soc_card *card = rtd->card;
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      struct snd_soc_component *wm5102_component = rtd->codec_dai->component;
++      int ret;
++      unsigned int old_params_set = priv->params_set;
++
++      priv->params_set &= ~(1 << substream->stream);
++
++      /* disable sysclk if this was the last open stream */
++      if (priv->params_set == 0 && old_params_set) {
++              dev_dbg(card->dev,
++                      "hw_free: Setting SYSCLK to Zero\n");
++
++              ret = snd_soc_component_set_sysclk(wm5102_component,
++                      ARIZONA_CLK_SYSCLK,
++                      ARIZONA_CLK_SRC_FLL1,
++                      0,
++                      SND_SOC_CLOCK_IN);
++              if (ret)
++                      dev_err(card->dev,
++                              "hw_free: Failed to set SYSCLK to Zero: %d\n",
++                              ret);
++      }
++      return 0;
++}
++
++static int rpi_cirrus_init_wm5102(struct snd_soc_pcm_runtime *rtd)
++{
++      struct snd_soc_component *component = rtd->codec_dai->component;
++      int ret;
++
++      /* no 32kHz input, derive it from sysclk if needed  */
++      snd_soc_component_update_bits(component,
++                      ARIZONA_CLOCK_32K_1, ARIZONA_CLK_32K_SRC_MASK, 2);
++
++      if (rpi_cirrus_clear_flls(rtd->card, component))
++              dev_warn(rtd->card->dev,
++                      "init_wm5102: failed to clear FLLs\n");
++
++      ret = snd_soc_component_set_sysclk(component,
++              ARIZONA_CLK_SYSCLK, ARIZONA_CLK_SRC_FLL1,
++              0, SND_SOC_CLOCK_IN);
++      if (ret) {
++              dev_err(rtd->card->dev,
++                      "Failed to set SYSCLK to Zero: %d\n", ret);
++              return ret;
++      }
++
++      return 0;
++}
++
++static int rpi_cirrus_init_wm8804(struct snd_soc_pcm_runtime *rtd)
++{
++      struct snd_soc_dai *codec_dai = rtd->codec_dai;
++      struct snd_soc_component *component = codec_dai->component;
++      struct snd_soc_card *card = rtd->card;
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      unsigned int val, mask;
++      int i, ret;
++
++      for (i = 0; i < 4; i++) {
++              ret = snd_soc_component_read(component,
++                      WM8804_SPDTX1 + i, &val);
++              if (ret)
++                      return ret;
++              mask = (i == 3) ? 0x3f : 0xff;
++              priv->iec958_status[i] = val & mask;
++      }
++
++      /* Setup for 256fs */
++      ret = snd_soc_dai_set_clkdiv(codec_dai,
++              WM8804_MCLK_DIV, WM8804_MCLKDIV_256FS);
++      if (ret) {
++              dev_err(card->dev,
++                      "init_wm8804: Failed to set MCLK_DIV to 256fs: %d\n",
++                      ret);
++              return ret;
++      }
++
++      /* Output OSC on CLKOUT */
++      ret = snd_soc_dai_set_sysclk(codec_dai,
++              WM8804_CLKOUT_SRC_OSCCLK, WM8804_CLKOUT_HZ, 0);
++      if (ret)
++              dev_err(card->dev,
++                      "init_wm8804: Failed to set CLKOUT as OSC Frequency: %d\n",
++                      ret);
++
++      /* Init PLL with default samplerate */
++      ret = rpi_cirrus_set_wm8804_pll(card, codec_dai,
++              RPI_CIRRUS_DEFAULT_RATE);
++      if (ret)
++              dev_err(card->dev,
++                      "init_wm8804: Failed to setup PLL for %dHz: %d\n",
++                      RPI_CIRRUS_DEFAULT_RATE, ret);
++
++      return ret;
++}
++
++static struct snd_soc_ops rpi_cirrus_ops = {
++      .startup = rpi_cirrus_startup,
++      .hw_params = rpi_cirrus_hw_params,
++      .hw_free = rpi_cirrus_hw_free,
++};
++
++static struct snd_soc_dai_link rpi_cirrus_dai[] = {
++      [DAI_WM5102] = {
++              .name           = "WM5102",
++              .stream_name    = "WM5102 AiFi",
++              .codec_dai_name = "wm5102-aif1",
++              .codec_name     = "wm5102-codec",
++              .dai_fmt        =   SND_SOC_DAIFMT_I2S
++                                | SND_SOC_DAIFMT_NB_NF
++                                | SND_SOC_DAIFMT_CBM_CFM,
++              .ops            = &rpi_cirrus_ops,
++              .init           = rpi_cirrus_init_wm5102,
++      },
++      [DAI_WM8804] = {
++              .name           = "WM5102 SPDIF",
++              .stream_name    = "SPDIF Tx/Rx",
++              .cpu_dai_name   = "wm5102-aif2",
++              .codec_dai_name = "wm8804-spdif",
++              .codec_name     = "wm8804.1-003b",
++              .dai_fmt        =   SND_SOC_DAIFMT_I2S
++                                | SND_SOC_DAIFMT_NB_NF
++                                | SND_SOC_DAIFMT_CBM_CFM,
++              .ignore_suspend = 1,
++              .params         = &rpi_cirrus_dai_link2_params,
++              .init           = rpi_cirrus_init_wm8804,
++      },
++};
++
++
++static int rpi_cirrus_late_probe(struct snd_soc_card *card)
++{
++      struct rpi_cirrus_priv *priv = snd_soc_card_get_drvdata(card);
++      struct snd_soc_pcm_runtime *wm5102_runtime = get_wm5102_runtime(card);
++      struct snd_soc_pcm_runtime *wm8804_runtime = get_wm8804_runtime(card);
++      int ret;
++
++      dev_dbg(card->dev, "iec958_bits: %02x %02x %02x %02x\n",
++              priv->iec958_status[0],
++              priv->iec958_status[1],
++              priv->iec958_status[2],
++              priv->iec958_status[3]);
++
++      ret = snd_soc_dai_set_sysclk(
++              wm5102_runtime->codec_dai, ARIZONA_CLK_SYSCLK, 0, 0);
++      if (ret) {
++              dev_err(card->dev,
++                      "Failed to set WM5102 codec dai clk domain: %d\n", ret);
++              return ret;
++      }
++
++      ret = snd_soc_dai_set_sysclk(
++              wm8804_runtime->cpu_dai, ARIZONA_CLK_SYSCLK, 0, 0);
++      if (ret)
++              dev_err(card->dev,
++                      "Failed to set WM8804 codec dai clk domain: %d\n", ret);
++
++      return ret;
++}
++
++/* audio machine driver */
++static struct snd_soc_card rpi_cirrus_card = {
++      .name                   = "RPi-Cirrus",
++      .driver_name            = "RPiCirrus",
++      .owner                  = THIS_MODULE,
++      .dai_link               = rpi_cirrus_dai,
++      .num_links              = ARRAY_SIZE(rpi_cirrus_dai),
++      .late_probe             = rpi_cirrus_late_probe,
++      .controls               = rpi_cirrus_controls,
++      .num_controls           = ARRAY_SIZE(rpi_cirrus_controls),
++      .dapm_widgets           = rpi_cirrus_dapm_widgets,
++      .num_dapm_widgets       = ARRAY_SIZE(rpi_cirrus_dapm_widgets),
++      .dapm_routes            = rpi_cirrus_dapm_routes,
++      .num_dapm_routes        = ARRAY_SIZE(rpi_cirrus_dapm_routes),
++      .set_bias_level         = rpi_cirrus_set_bias_level,
++      .set_bias_level_post    = rpi_cirrus_set_bias_level_post,
++};
++
++static int rpi_cirrus_probe(struct platform_device *pdev)
++{
++      int ret = 0;
++      struct rpi_cirrus_priv *priv;
++      struct device_node *i2s_node;
++
++      priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
++      if (!priv)
++              return -ENOMEM;
++
++      priv->min_rate_idx = 1; /* min samplerate 32kHz */
++      priv->card_rate = RPI_CIRRUS_DEFAULT_RATE;
++
++      mutex_init(&priv->lock);
++
++      snd_soc_card_set_drvdata(&rpi_cirrus_card, priv);
++
++      if (!pdev->dev.of_node)
++              return -ENODEV;
++
++      i2s_node = of_parse_phandle(
++                      pdev->dev.of_node, "i2s-controller", 0);
++      if (!i2s_node) {
++              dev_err(&pdev->dev, "i2s-controller missing in DT\n");
++              return -ENODEV;
++      }
++
++      rpi_cirrus_dai[DAI_WM5102].cpu_of_node = i2s_node;
++      rpi_cirrus_dai[DAI_WM5102].platform_of_node = i2s_node;
++
++      rpi_cirrus_card.dev = &pdev->dev;
++
++      ret = devm_snd_soc_register_card(&pdev->dev, &rpi_cirrus_card);
++      if (ret) {
++              if (ret == -EPROBE_DEFER)
++                      dev_dbg(&pdev->dev,
++                              "register card requested probe deferral\n");
++              else
++                      dev_err(&pdev->dev,
++                              "Failed to register card: %d\n", ret);
++      }
++
++      return ret;
++}
++
++static const struct of_device_id rpi_cirrus_of_match[] = {
++      { .compatible = "wlf,rpi-cirrus", },
++      {},
++};
++MODULE_DEVICE_TABLE(of, rpi_cirrus_of_match);
++
++static struct platform_driver rpi_cirrus_driver = {
++      .driver = {
++              .name   = "snd-rpi-cirrus",
++              .of_match_table = of_match_ptr(rpi_cirrus_of_match),
++      },
++      .probe  = rpi_cirrus_probe,
++};
++
++module_platform_driver(rpi_cirrus_driver);
++
++MODULE_AUTHOR("Matthias Reichl <hias@horus.com>");
++MODULE_DESCRIPTION("ASoC driver for Cirrus Logic Audio Card");
++MODULE_LICENSE("GPL");