brcm2708: rename target to bcm27xx

[openwrt/staging/dedeckeh.git] / target / linux / brcm2708 / patches-4.19 / 950-0142-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0142-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch b/target/linux/brcm2708/patches-4.19/950-0142-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch
deleted file mode 100644 (file)
index 56d9d9a..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0142-overlays-Add-an-overlay-for-the-Adafruit-Kippah-with.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-From 467e9cb87261c27b6c70ec714ae3cb58b48d0f6b Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Fri, 9 Mar 2018 13:20:21 -0800
-Subject: [PATCH] overlays: Add an overlay for the Adafruit Kippah with
- their 7" panel
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             |  7 +++
- .../overlays/vc4-kms-kippah-7inch-overlay.dts | 43 +++++++++++++++++++
- 3 files changed, 51 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -134,6 +134,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
-       upstream.dtbo \
-       upstream-aux-interrupt.dtbo \
-       vc4-fkms-v3d.dtbo \
-+      vc4-kms-kippah-7inch.dtbo \
-       vc4-kms-v3d.dtbo \
-       vga666.dtbo \
-       w1-gpio.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -1920,6 +1920,13 @@ Params: cma-256                 CMA is 2
-         cma-64                  CMA is 64MB, 64MB-aligned
- 
- 
-+Name:   vc4-kms-kippah-7inch
-+Info:   Enable the Adafruit DPI Kippah with the 7" Ontat panel attached.
-+        Requires vc4-kms-v3d to be loaded.
-+Load:   dtoverlay=vc4-kms-kippah-7inch
-+Params: <None>
-+
-+
- Name:   vc4-kms-v3d
- Info:   Enable Eric Anholt's DRM VC4 HDMI/HVS/V3D driver. Running startx or
-         booting to GUI while this overlay is in use will cause interesting
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/vc4-kms-kippah-7inch-overlay.dts
-@@ -0,0 +1,43 @@
-+/*
-+ * vc4-kms-v3d-overlay.dts
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+#include <dt-bindings/pinctrl/bcm2835.h>
-+
-+/ {
-+      compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+      fragment@0 {
-+              target-path = "/";
-+              __overlay__ {
-+                      panel: panel {
-+                              compatible = "ontat,yx700wv03", "simple-panel";
-+
-+                              port {
-+                                      panel_in: endpoint {
-+                                              remote-endpoint = <&dpi_out>;
-+                                      };
-+                              };
-+                      };
-+              };
-+      };
-+
-+      fragment@1 {
-+              target = <&dpi>;
-+              __overlay__  {
-+                      status = "okay";
-+
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&dpi_18bit_gpio0>;
-+
-+                      port {
-+                              dpi_out: endpoint@0 {
-+                                      remote-endpoint = <&panel_in>;
-+                              };
-+                      };
-+              };
-+      };
-+};