brcm2708: organize kernel patches

[openwrt/staging/dedeckeh.git] / target / linux / brcm2708 / patches-4.19 / 950-0191-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch

diff --git a/target/linux/brcm2708/patches-4.19/950-0191-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch b/target/linux/brcm2708/patches-4.19/950-0191-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch
deleted file mode 100644 (file)
index 999ad5f..0000000
--- a/target/linux/brcm2708/patches-4.19/950-0191-media-tc358743-fix-connected-active-CSI-2-lane-repor.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From f0a4354bf8d99532577a21bb99da792fe2691626 Mon Sep 17 00:00:00 2001
-From: Philipp Zabel <p.zabel@pengutronix.de>
-Date: Thu, 21 Sep 2017 17:30:24 +0200
-Subject: [PATCH 191/806] media: tc358743: fix connected/active CSI-2 lane
- reporting
-
-g_mbus_config was supposed to indicate all supported lane numbers, not
-only the number of those currently in active use. Since the TC358743
-can dynamically reduce the number of active lanes if the required
-bandwidth allows for it, report all lane numbers up to the connected
-number of lanes as supported in pdata mode.
-In device tree mode, do not report lane count and clock mode at all, as
-the receiver driver can determine these from the device tree.
-
-To allow communicating the number of currently active lanes, add a new
-bitfield to the v4l2_mbus_config flags. This is a temporary fix, to be
-used only until a better solution is found.
-
-Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
----
- drivers/media/i2c/tc358743.c  | 30 ++++++++++++++++--------------
- include/media/v4l2-mediabus.h |  8 ++++++++
- 2 files changed, 24 insertions(+), 14 deletions(-)
-
---- a/drivers/media/i2c/tc358743.c
-+++ b/drivers/media/i2c/tc358743.c
-@@ -1606,28 +1606,29 @@ static int tc358743_g_mbus_config(struct
-                            struct v4l2_mbus_config *cfg)
- {
-       struct tc358743_state *state = to_state(sd);
-+      const u32 mask = V4L2_MBUS_CSI2_LANE_MASK;
-+
-+      if (state->csi_lanes_in_use > state->bus.num_data_lanes)
-+              return -EINVAL;
- 
-       cfg->type = V4L2_MBUS_CSI2;
-+      cfg->flags = (state->csi_lanes_in_use << __ffs(mask)) & mask;
-+
-+      /* In DT mode, only report the number of active lanes */
-+      if (sd->dev->of_node)
-+              return 0;
- 
--      /* Support for non-continuous CSI-2 clock is missing in the driver */
--      cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
-+      /* Support for non-continuous CSI-2 clock is missing in pdata mode */
-+      cfg->flags |= V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
- 
--      switch (state->csi_lanes_in_use) {
--      case 1:
-+      if (state->bus.num_data_lanes > 0)
-               cfg->flags |= V4L2_MBUS_CSI2_1_LANE;
--              break;
--      case 2:
-+      if (state->bus.num_data_lanes > 1)
-               cfg->flags |= V4L2_MBUS_CSI2_2_LANE;
--              break;
--      case 3:
-+      if (state->bus.num_data_lanes > 2)
-               cfg->flags |= V4L2_MBUS_CSI2_3_LANE;
--              break;
--      case 4:
-+      if (state->bus.num_data_lanes > 3)
-               cfg->flags |= V4L2_MBUS_CSI2_4_LANE;
--              break;
--      default:
--              return -EINVAL;
--      }
- 
-       return 0;
- }
-@@ -2052,6 +2053,7 @@ static int tc358743_probe(struct i2c_cli
-       if (pdata) {
-               state->pdata = *pdata;
-               state->bus.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
-+              state->bus.num_data_lanes = 4;
-       } else {
-               err = tc358743_probe_of(state);
-               if (err == -ENODEV)
---- a/include/media/v4l2-mediabus.h
-+++ b/include/media/v4l2-mediabus.h
-@@ -67,6 +67,14 @@
-                                        V4L2_MBUS_CSI2_3_LANE | V4L2_MBUS_CSI2_4_LANE)
- #define V4L2_MBUS_CSI2_CHANNELS               (V4L2_MBUS_CSI2_CHANNEL_0 | V4L2_MBUS_CSI2_CHANNEL_1 | \
-                                        V4L2_MBUS_CSI2_CHANNEL_2 | V4L2_MBUS_CSI2_CHANNEL_3)
-+/*
-+ * Number of lanes in use, 0 == use all available lanes (default)
-+ *
-+ * This is a temporary fix for devices that need to reduce the number of active
-+ * lanes for certain modes, until g_mbus_config() can be replaced with a better
-+ * solution.
-+ */
-+#define V4L2_MBUS_CSI2_LANE_MASK                (0xf << 10)
- 
- /**
-  * enum v4l2_mbus_type - media bus type