brcm2708: update to latest patches from RPi foundation
[openwrt/staging/dedeckeh.git] / target / linux / brcm2708 / patches-4.19 / 950-0442-Fixed-48k-timing-issue.patch
diff --git a/target/linux/brcm2708/patches-4.19/950-0442-Fixed-48k-timing-issue.patch b/target/linux/brcm2708/patches-4.19/950-0442-Fixed-48k-timing-issue.patch
deleted file mode 100644 (file)
index 541e18a..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From 539e2eef7dbfb58ab028a5530430611973dd4c84 Mon Sep 17 00:00:00 2001
-From: IQaudIO <gordon@iqaudio.com>
-Date: Thu, 6 Jun 2019 10:20:55 +0100
-Subject: [PATCH] Fixed 48k timing issue
-
----
- sound/soc/bcm/iqaudio-codec.c | 33 ++++++++++++++++++++++++++++-----
- 1 file changed, 28 insertions(+), 5 deletions(-)
-
---- a/sound/soc/bcm/iqaudio-codec.c
-+++ b/sound/soc/bcm/iqaudio-codec.c
-@@ -45,11 +45,15 @@ static int snd_rpi_iqaudio_pll_control(s
-                                         0);
-               if (ret)
-                       dev_err(card->dev, "Failed to bypass PLL: %d\n", ret);
-+              /* Allow PLL time to bypass */
-+              msleep(100);
-       } else if (SND_SOC_DAPM_EVENT_ON(event)) {
-               ret = snd_soc_dai_set_pll(codec_dai, 0, DA7213_SYSCLK_PLL, 0,
-                                         pll_out);
-               if (ret)
-                       dev_err(card->dev, "Failed to enable PLL: %d\n", ret);
-+              /* Allow PLL time to lock */
-+              msleep(100);
-       }
-       return ret;
-@@ -71,6 +75,13 @@ static int snd_rpi_iqaudio_post_dapm_eve
-      return 0;
- }
-+static const struct snd_kcontrol_new dapm_controls[] = {
-+      SOC_DAPM_PIN_SWITCH("HP Jack"),
-+      SOC_DAPM_PIN_SWITCH("MIC Jack"),
-+      SOC_DAPM_PIN_SWITCH("Onboard MIC"),
-+      SOC_DAPM_PIN_SWITCH("AUX Jack"),
-+};
-+
- static const struct snd_soc_dapm_widget dapm_widgets[] = {
-       SND_SOC_DAPM_HP("HP Jack", NULL),
-       SND_SOC_DAPM_MIC("MIC Jack", NULL),
-@@ -87,14 +98,14 @@ static const struct snd_soc_dapm_route a
-       {"HP Jack", NULL, "HPR"},
-       {"HP Jack", NULL, "PLL Control"},
--      {"AUX Jack", NULL, "AUXR"},
--      {"AUX Jack", NULL, "AUXL"},
-+      {"AUXR", NULL, "AUX Jack"},
-+      {"AUXL", NULL, "AUX Jack"},
-       {"AUX Jack", NULL, "PLL Control"},
-       /* Assume Mic1 is linked to Headset and Mic2 to on-board mic */
--      {"MIC Jack", NULL, "MIC1"},
-+      {"MIC1", NULL, "MIC Jack"},
-       {"MIC Jack", NULL, "PLL Control"},
--      {"Onboard MIC", NULL, "MIC2"},
-+      {"MIC2", NULL, "Onboard MIC"},
-       {"Onboard MIC", NULL, "PLL Control"},
- };
-@@ -106,6 +117,16 @@ static int snd_rpi_iqaudio_codec_init(st
-       struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-       int ret;
-+      /*
-+       * Disable AUX Jack Pin by default to prevent PLL being enabled at
-+       * startup. This avoids holding the PLL to a fixed SR config for
-+       * subsequent streams.
-+       *
-+       * This pin can still be enabled later, as required by user-space.
-+       */
-+      snd_soc_dapm_disable_pin(&rtd->card->dapm, "AUX Jack");
-+      snd_soc_dapm_sync(&rtd->card->dapm);
-+
-       /* Set bclk ratio to align with codec's BCLK rate */
-       ret = snd_soc_dai_set_bclk_ratio(cpu_dai, 64);
-       if (ret) {
-@@ -168,6 +189,8 @@ static struct snd_soc_card snd_rpi_iqaud
-       .owner                  = THIS_MODULE,
-       .dai_link               = snd_rpi_iqaudio_codec_dai,
-       .num_links              = ARRAY_SIZE(snd_rpi_iqaudio_codec_dai),
-+      .controls               = dapm_controls,
-+      .num_controls           = ARRAY_SIZE(dapm_controls),
-       .dapm_widgets           = dapm_widgets,
-       .num_dapm_widgets       = ARRAY_SIZE(dapm_widgets),
-       .dapm_routes            = audio_map,
-@@ -204,7 +227,7 @@ static int snd_rpi_iqaudio_codec_probe(s
-               if (of_property_read_string(pdev->dev.of_node,
-                                       "dai_stream_name", &dai->stream_name))
--                      dai->stream_name = "IQaudIO CODEC HiFi v1.1";
-+                      dai->stream_name = "IQaudIO CODEC HiFi v1.2";
-       }